Имиджи за IP BOX

[thunderstorm6]

IP BOX - 900_usb_all_noboot.img.tar version.rar
IP BOX - 910_usb_all_noboot.img.tar version.rar
http://www.sat-universe.com/showthread.php?t=125992

Enigma2 Release 0.5.0 for 900HD_cuberevo_mini.tar.tar
Enigma2 Release 0.5.0 for 900HD_cuberevo_mini_flash.tar.tar
Abcom enigma1 beta for IP-Box 900.rar
http://www.sat-universe.com/showthread.php?t=124501
http://209.85.135.132/search?q=cache...k&client=opera

[thunderstorm6]

DGS r10336 For Ipbox 200/250/900


DGS release r10336: ( 08/Aug/2009)

1. Add iCubeRevo function:
If you have the iPhone(or iPod), you can operate the STB via iPhone
(or iPod). More description is attached. The file name is "iCubeRevo_manual.pdf".
2. Add streaming player function:
Bi-directional stream transmission between STB and PC is possible.
Several protocols(UDP, RTP) are supported. And Multicast or unicast
are supported.
More description is attached. The file name is "MultiRoom and
Streaming manual.pdf".
3. Add multiroom service function:
Several STBs can access the Server STB and see the Server's file, mp3,
video player and channels. More description is attached. The file name
is "MultiRoom and Streaming manual.pdf".
4. Add M3U Player function:
M3U is a format that stores multimedia playlists. Our M3U player can
play XVID(Without GMC and Qpel), MPEG1, MPEG2, H.264.
5. Improv Nordic subtitle (Canal Film HD, Silver HD, BBC HD and so on):
For the meantime, we didn't display subtitle without PTS or with wrong
PTS. But, at present, we support these subtitle.
6. Improve the channel navigation:
You can see the faster movement at the channel, Fav, epg list
and so on.
7. Fixed incorrect aspect ratio for 4:3 channels:
For the meantime, our STB displayed PillarBox, Zoom with a little distortion.
8. Fixed subtitle overlaping on Hotbird:
Hotbird 13E 11766 V 27500 (channel name : Rai1, Rai2, Rai3)
9. Fixed ttxt subtitle page at the specific pages(775~777):
Hotbird 13E 11919 V 27500 (channel name : Italia 1, Canale 5, Retequattro)
10. Update russian language file by uncle fedor.
11. Update german language file by Nils.

Note.
1. When multiroom service and streaming player is running,
recording and pip doesn't support.
2. Our Video player is related with CODEC, FPS(frame per second)
and resolution.
As you know, even if the Filename Extension is different each other,
if the video codec is same each other, the two files work like same.
If the video file's resolution is more than 720 X 576, it will works very well.
So, we recommend below conditions.
1) resolution : 720 X 576.
2) FPS : 24, 25 and 30 fps.
3) Following video and audio codec.
Video Codec : XVID(Without GMC and Qpel), OpenDivx
(less than Divx5.2), MPEG1, MPEG2, H.264
Audio Codec : MP2, MP3, AC3
When file's codec is Xvid, If you remove the GMC and Qpel, it works well.
If the file's video codec is MPEG series, it doesn't support the adjusting
sync function on video player.

3. ext3 file system is slower than ext2 normally.
If you record two HD channels with ext3 at the same time, it may fail in record.
we have checked the speed as below
ext2 speed : approximately 7MB/s
ext3 speed : approximately 3MB/s

Known issues(on going).
1. Artefact with Premiere HD channels from satellite or cable.
2. The timeshift function of multiroom will release on the next.

Caution.
1. we strongly recommend to format your USB memory stick before the
new image copy in it, otherwise, it may happen "ER10".
2. you should download usb_all_noboot.img into STB for improving Web
interface and plugins, otherwise, the function will be the same as
previous one.
http://upek.sputnik-sat.info/content.php?id=6222

[thunderstorm6]

DGS r10336 For Ipbox 200/250/900


DGS release r10336: ( 08/Aug/2009)

1. Add iCubeRevo function:
If you have the iPhone(or iPod), you can operate the STB via iPhone
(or iPod). More description is attached. The file name is "iCubeRevo_manual.pdf".
2. Add streaming player function:
Bi-directional stream transmission between STB and PC is possible.
Several protocols(UDP, RTP) are supported. And Multicast or unicast
are supported.
More description is attached. The file name is "MultiRoom and
Streaming manual.pdf".
3. Add multiroom service function:
Several STBs can access the Server STB and see the Server's file, mp3,
video player and channels. More description is attached. The file name
is "MultiRoom and Streaming manual.pdf".
4. Add M3U Player function:
M3U is a format that stores multimedia playlists. Our M3U player can
play XVID(Without GMC and Qpel), MPEG1, MPEG2, H.264.
5. Improv Nordic subtitle (Canal Film HD, Silver HD, BBC HD and so on):
For the meantime, we didn't display subtitle without PTS or with wrong
PTS. But, at present, we support these subtitle.
6. Improve the channel navigation:
You can see the faster movement at the channel, Fav, epg list
and so on.
7. Fixed incorrect aspect ratio for 4:3 channels:
For the meantime, our STB displayed PillarBox, Zoom with a little distortion.
8. Fixed subtitle overlaping on Hotbird:
Hotbird 13E 11766 V 27500 (channel name : Rai1, Rai2, Rai3)
9. Fixed ttxt subtitle page at the specific pages(775~777):
Hotbird 13E 11919 V 27500 (channel name : Italia 1, Canale 5, Retequattro)
10. Update russian language file by uncle fedor.
11. Update german language file by Nils.

Note.
1. When multiroom service and streaming player is running,
recording and pip doesn't support.
2. Our Video player is related with CODEC, FPS(frame per second)
and resolution.
As you know, even if the Filename Extension is different each other,
if the video codec is same each other, the two files work like same.
If the video file's resolution is more than 720 X 576, it will works very well.
So, we recommend below conditions.
1) resolution : 720 X 576.
2) FPS : 24, 25 and 30 fps.
3) Following video and audio codec.
Video Codec : XVID(Without GMC and Qpel), OpenDivx
(less than Divx5.2), MPEG1, MPEG2, H.264
Audio Codec : MP2, MP3, AC3
When file's codec is Xvid, If you remove the GMC and Qpel, it works well.
If the file's video codec is MPEG series, it doesn't support the adjusting
sync function on video player.

3. ext3 file system is slower than ext2 normally.
If you record two HD channels with ext3 at the same time, it may fail in record.
we have checked the speed as below
ext2 speed : approximately 7MB/s
ext3 speed : approximately 3MB/s

Known issues(on going).
1. Artefact with Premiere HD channels from satellite or cable.
2. The timeshift function of multiroom will release on the next.

Caution.
1. we strongly recommend to format your USB memory stick before the
new image copy in it, otherwise, it may happen "ER10".
2. you should download usb_all_noboot.img into STB for improving Web
interface and plugins, otherwise, the function will be the same as
previous one.
http://upek.sputnik-sat.info/content.php?id=6219

[thunderstorm6]

DGS r10336 For Ipbox 200/250/900


DGS release r10336: ( 08/Aug/2009)

1. Add iCubeRevo function:
If you have the iPhone(or iPod), you can operate the STB via iPhone
(or iPod). More description is attached. The file name is "iCubeRevo_manual.pdf".
2. Add streaming player function:
Bi-directional stream transmission between STB and PC is possible.
Several protocols(UDP, RTP) are supported. And Multicast or unicast
are supported.
More description is attached. The file name is "MultiRoom and
Streaming manual.pdf".
3. Add multiroom service function:
Several STBs can access the Server STB and see the Server's file, mp3,
video player and channels. More description is attached. The file name
is "MultiRoom and Streaming manual.pdf".
4. Add M3U Player function:
M3U is a format that stores multimedia playlists. Our M3U player can
play XVID(Without GMC and Qpel), MPEG1, MPEG2, H.264.
5. Improv Nordic subtitle (Canal Film HD, Silver HD, BBC HD and so on):
For the meantime, we didn't display subtitle without PTS or with wrong
PTS. But, at present, we support these subtitle.
6. Improve the channel navigation:
You can see the faster movement at the channel, Fav, epg list
and so on.
7. Fixed incorrect aspect ratio for 4:3 channels:
For the meantime, our STB displayed PillarBox, Zoom with a little distortion.
8. Fixed subtitle overlaping on Hotbird:
Hotbird 13E 11766 V 27500 (channel name : Rai1, Rai2, Rai3)
9. Fixed ttxt subtitle page at the specific pages(775~777):
Hotbird 13E 11919 V 27500 (channel name : Italia 1, Canale 5, Retequattro)
10. Update russian language file by uncle fedor.
11. Update german language file by Nils.

Note.
1. When multiroom service and streaming player is running,
recording and pip doesn't support.
2. Our Video player is related with CODEC, FPS(frame per second)
and resolution.
As you know, even if the Filename Extension is different each other,
if the video codec is same each other, the two files work like same.
If the video file's resolution is more than 720 X 576, it will works very well.
So, we recommend below conditions.
1) resolution : 720 X 576.
2) FPS : 24, 25 and 30 fps.
3) Following video and audio codec.
Video Codec : XVID(Without GMC and Qpel), OpenDivx
(less than Divx5.2), MPEG1, MPEG2, H.264
Audio Codec : MP2, MP3, AC3
When file's codec is Xvid, If you remove the GMC and Qpel, it works well.
If the file's video codec is MPEG series, it doesn't support the adjusting
sync function on video player.

3. ext3 file system is slower than ext2 normally.
If you record two HD channels with ext3 at the same time, it may fail in record.
we have checked the speed as below
ext2 speed : approximately 7MB/s
ext3 speed : approximately 3MB/s

Known issues(on going).
1. Artefact with Premiere HD channels from satellite or cable.
2. The timeshift function of multiroom will release on the next.

Caution.
1. we strongly recommend to format your USB memory stick before the
new image copy in it, otherwise, it may happen "ER10".
2. you should download usb_all_noboot.img into STB for improving Web
interface and plugins, otherwise, the function will be the same as
previous one.
http://upek.sputnik-sat.info/index.php?date_now=2009-08-11

[thunderstorm6]

Sifteam Image r10336


1. Add iCubeRevo function
: If you have the iPhone(or iPod), you can operate the STB via iPhone(or iPod).
More description is attached. The file name is "iCubeRevo_manual.pdf".
2. Add streaming player function
: Bi-directional stream transmission between STB and PC is possible.
Several protocols(UDP, RTP) are supported. And Multicast or unicast are supported.
More description is attached. The file name is "MultiRoom and Streaming manual.pdf".
3. Add multiroom service function
: Several STBs can access the Server STB and see the Server's file, mp3, video player and channels.
More description is attached. The file name is "MultiRoom and Streaming manual.pdf".
4. Add M3U Player function
: M3U is a format that stores multimedia playlists.
Our M3U player can play XVID(Without GMC and Qpel), MPEG1, MPEG2, H.264.
5. Improv Nordic subtitle (Canal Film HD, Silver HD, BBC HD and so on)
: For the meantime, we didn't display subtitle without PTS or with wrong PTS.
But, at present, we support these subtitle.
6. Improve the channel navigation
: You can see the faster movement at the channel, Fav, epg list and so on.
7. Fixed incorrect aspect ratio for 4:3 channels
: For the meantime, our STB displayed PillarBox, Zoom with a little distortion.
8. Fixed subtitle overlaping on Hotbird.
: Hotbird 13E 11766 V 27500 (channel name : Rai1, Rai2, Rai3)
9. Fixed ttxt subtitle page at the specific pages(775~777)
: Hotbird 13E 11919 V 27500 (channel name : Italia 1, Canale 5, Retequattro)
10. Update russian language file by uncle fedor.
11. Update german language file by Nils.

Note.
1. When multiroom service and streaming player is running, recording and pip doesn't support.
2. Our Video player is related with CODEC, FPS(frame per second) and resolution.
As you know, even if the Filename Extension is different each other,
if the video codec is same each other, the two files work like same.
If the video file's resolution is more than 720 X 576, it will works very well.
So, we recommend below conditions.
1) resolution : 720 X 576.
2) FPS : 24, 25 and 30 fps.
3) Following video and audio codec.
Video Codec : XVID(Without GMC and Qpel), OpenDivx(less than Divx5.2), MPEG1, MPEG2, H.264
Audio Codec : MP2, MP3, AC3
When file's codec is Xvid, If you remove the GMC and Qpel, it works well.
If the file's video codec is MPEG series, it doesn't support the adjusting sync function on video player.

3. ext3 file system is slower than ext2 normally.
If you record two HD channels with ext3 at the same time, it may fail in record.

we have checked the speed as below
ext2 speed : approximately 7MB/s
ext3 speed : approximately 3MB/s

Known issues(on going).
1. Artefact with Premiere HD channels from satellite or cable.
2. The timeshift function of multiroom will release on the next.

Caution.
1. we strongly recommend to format your USB memory stick before the new image copy in it, otherwise, it may happen "ER10".
2. you should download usb_all_noboot.img into STB for improving Web interface and plugins, otherwise, the function will be the same as previous one.



91HD-usb_update
900-usb_update
910-usb_update
9000-usb_update

http://upek.sputnik-sat.info/index.php?date_now=2009-08-11
http://forum.sat-expert.com/anonsy-relizy-proshivok/12294-imidji-dlia-ipbox-910hd-6.html

[thunderstorm6]

Sifteam r10427 for 91HD/ 900HD/ 910HD


Add Timeshift function on Multiroom Service.
Some bugs of Streaming Player and Multiroom Service are fixed
and Those functions has still a few bugs, and it takes a little more time for fixing.

thx ngc and sifteam

http://upek.sputnik-sat.info/index.p...now=2009-08-16
http://forum.sat-expert.com/anonsy-r...x-910hd-6.html
http://www.sat-4-all.com/board/index...iew=getnewpost

[thunderstorm6]

NPKT mod 5.5 Tideglo rev 0.5.5

PKT mod 5.5 Tideglo rev 0.5.5, 9000 HD / 910 HD / 900 HD / 91 HD



release 0.5.5
*********************
Ok from this release you will get a nightly build image. (this means i will not support stupid options like: panels, plugins and so on)
Soon a sifteam image will be out with panel and many options enabled.
I choose this way because i want that cuberevo community increase more! Many teams are involved in E2 now, so
each one can do his choice, and sifteam images will be out with another image (obviously based on the same Nightly build image version)
I will publish also how to build your own flash image, so every team can do it.

- new bootlogo (thanks arken)
- added bulgarian language
- added autofs
- added openvpn
- added openssl library
- added 576i to AutoResolution plugin
- added ftpput
- added ftpget
- added netstat
- "fixed" signal level on tuners
- teletext exit with "exit" button on remote
- fixed aspect on screen when exiting from teletext. If watching 16:9 format, it is shrinked, so looks like 16:6 or something
- fixed positioner setup
- fixed teletext subtitles
- remapped few buttons
- fix for DVB subtitles wich were not shown on some skins
- fixed bootlogo view on SD television
- fix the issue with stopping playback while it is paused
- incorporated the new web interface version (04/06/2009)
- fixed fast forward for MP3 in MediaPlayer
- enabled forwarding the second transport stream to the decoder
- fix avi 23.976fps/24.976fps/29.976fps
- avi: fix audio track selection early support for redirecting in http streaming
- added .rec extension file support
- CI cam drivers handling should now be better
- lot of fixes on PicturePlayer
- lot of fixes on MediaPlayer
- modified epgCache load to allow the load on e2 starts (now crossEpg works perfectly)
- fix avi 23.976fps/24.976fps/29.976fps
- added estonian language
- allowed to record/stream multiple channels from the same transponder (FTA only)

- There were a bug when a freeze happen on HD and SD channels, that bug showed you a full green pixel screen or an image repeating loop,
well this is bug was really hard to find for me and i'm not sure i've found all the cases when it happens, so... let me know if it happens again.

Many people asked me to add smart card drivers made by pacco, but i've not did them, so i will not add them like part of my images.
They can be added manually by everyone and each team made the possibilty to download and install them, so i will not add them until
i will make my own version (wich i don't know when and how it will be ready, you can use the pacco's version wich is good enought)

Enjoy it! Tideglo

Zmiany PKT w stosunku do wersji 5.1
- nowy emu manager
- pobieranie emu -> BP -> Pluginy -> Plugins -> zielony przycisk
- domy[lny skin Alien - thx FatherPio
- zmieniony keymap
- poprawiony zegar w standby
- poprawiona wspуBpraca z incubusCamd
- rу|ne drobne poprawki

Pozdrawiamy Polish Kathi Team
http://www.sat-universe.com/forumdisplay.php?f=422
http://upek.sputnik-sat.info/index.php?date_now=2009-08-14

[thunderstorm6]

New Image Modder UFM - IPBox 9XXHD - 10336.UFM.build.002



What is it? This is a modified firmware from the official DGS,
which, however, the closest alternative to the firmware to
the official. When modifying the following approach:
minimal invasion of the "factory" code, a minimum of additional
startuemyh scripts and services, only the most necessary.
From this point of view, the most famous alternative firmware
(SifTeam and NLB), there are some bad things. Not going into
jungle, suffice it to say that scripts run in softkamov SifTeam
realized baldly, and in some places and quite wrong.
In the NLB (which is not illicit initial developer, a beginner,
do not seem to quite know what the), there are lots of
unnecessary cumbersome, which can solve one or two teams
in the Telnet. In short, the firmware 'UFM' solves the problem
of minimal invasion of the receiver, while adding interesting
opportunities for those who need them.

For minimalism have to pay so that you will not have a "control panel
softkamom or access to the receiver on the SSH and all other" types
of luxury goods "(which every year is used in the initial setup, and then
hangs unnecessary goods). If you want to change skin color or reassign
action buttons, you have to give a couple-three teams in the Telnet.
So I just want to say to those who expect that the firmware will "steepen"
the other (otherwise why would it do?): "Will not be steeper."
More precisely, will be, but not for all. Because each person their ideas
about how it is "cooler". This firmware - one. If you like the fact that
the receiver's two (!) Web server, SSH, FTP, Telnet servers,
SoftKey, software for the card reader, etc., etc., and it works by
default, and at the same time - take courage LNB. If you like klatsane
colored buttons in the toolbar SifTeam, and as a result you get a left
foot prikruchennye scripts and iskromsannye official scripts - take
SifTeam. If you need a minimum "set of gentlemen", implemented
correctly, and you're not afraid to give another team-from the
command line, you will here.
http://www.sat-universe.com/showthread.php?p=432884
http://rapidshare.de/files/48082524/...d.002.zip.html
http://rapidshare.de/files/48082791/...d.002.zip.html
http://rapidshare.de/files/48082951/...d.002.zip.html

[thunderstorm6]

DGS release r10427 for 900HD/ 91HD

DGS release r10427: ( 14/Aug/2009)
--------------------------------------------------------------
Add Timeshift function on Multiroom Service.
Some bugs of Streaming Player and Multiroom Service are fixed
and Those functions has still a few bugs, and it takes a little more time for fixing.

http://upek.sputnik-sat.info/content.php?id=6301
http://upek.sputnik-sat.info/content.php?id=6300

[uniqad]

SifTeam 0.3.0 r10513
Changelog DGS:
DGS release r10513: ( 21/Aug/2009)
--------------------------------------------------------------
1. Fixed a few bugs for Post-Descramble
2. Return to previous method that select subtitle language in Language settings Menu
3. Fixed some bugs for Multiroom Service.
Protocol for mutiroom service is changed from this version. So, older SW(r10427) is not compatible with this SW(r10513).



Changelog SifTeam:
SifTeam-0.3.0
-------------

From this release I add DGS Multiboot options *
From default start without check or format HardDisk (requested) **
Is possible don't start any Service at startup ***
Personalized SAMBA and NFSD config ****
Any change in panel


* Press number button which you want on RCU when start decoder.
Multiboot function supports as below style.
# 1 boot with CDKroot(NFS)
# 2 boot from USB memory stick, with internal HDD
# 3 original images as current flash memory
# 4 boot with NFS
# 5 boot from USB memory stick, but without internal HDD
# 6 boot from internal SATA HDD
# 7 boot from flash memory for another image
Default value : no.3

** Remove file:
/var/etc/.dont_format_hdd
/var/etc/.dont_check_hdd
..and return as default system

*** Make file:
/var/etc/.dont_start_samba If present, at startup don't start samba
/var/etc/.dont_start_nfsd If present, at startup don't start nfsd
/var/etc/.dont_start_httpd If present, at startup don't start httpd
/var/etc/.dont_mount_usb If present, at startup don't mount usb
/var/etc/.dont_start_vsftpd If present, at startup don't start vsftpd

**** Make directory:
/media/ENIGMA1/movie
From other decoder with enigma1 firmware (for example SifTeam Firmware)
Add this command for share disk with samba:
smbmount "//192.168.1.9/ENIGMA1" -U root -c 'mount /hdd/ -u 500 -g 100'
Add this command for share disk with nfs:
mount -t nfs -o nolock,nfsvers=2,rsize=8192,wsize=8192,proto=tcp 192.168.1.9:/media/ENIGMA1 /hdd
192.168.1.9 is IP of IPBOXHD shared disk, ..change with your IP!!
In all Sifteam Firmware is possible add this command at bottom of file /var/etc/rcS.d/S99user_start.sh
and automount at startup.
http://dreambox.sifteam.eu/index.php?dir=9000HD/r10513/

[thunderstorm6]

SifTeam 1.9.4 Ipbox 200 - 250 - 350 -4xx

About the new image 1.9.4
-----------------------------
Coder: ngc1927
--------------
Help from: tension9000 - MaxZ4
-------------------------------
Betatester and friends:
Badwolf = Dm7020s - ipbox350
theseven = Dm7020s
biondo79 = Ipbox250s - DM500s - DM600PVR
Costa46 = Qbox-one - Ipbox250
Morpheus883 = Dm500s
nikolasi = Ipbox200s - Ipbox250s - skinner
getdownup = IPBox250 - DM500s
frog68 = Unixbox500
zio = Dm500s - dm7000
piefav = Dm7020s
genge = Qbox-one
rrotan = skinner
arken = new boot logo

Changes:

1) CVS updated to 26.07.2009
2) Now you are able to see info about packs,enable the function trought advanced panel
3) Now you can see the latest packs and updates available on our panel
4) Changed webif and boot images
5) Some changes on code
6) UPNP is available (SERVER/CLIENT)
7) Moved vsftpd.conf in /var/etc/
New flashes of qbox one are now ok
9) Qbox manager updated(some fixes on dtt)
10) Two new skins by nikolasi sifteam_red e sifteam_blu (thx)
11) Added Black_Matrix gold by MX mod_RG (thanks matrix) modded by rroatan
12) Added skin Army omega black (thanks army)
13) Added all_languages for sifteam 1.9.4
14) Added and fixed Multiview pack
Note:
For the version ipbox-200@64mb you must:
1)install the normal img for ipbox200
2)install "serial_uboot_64.img"
both with flashtools or Flasher
* About Programs:
-----------------
For all sifteam images, on /var/etc/rcS.d/S99user_start.sh you can choose a program to start(there are already some commented examples..remove "#" to active them)
Tips
----------------
To enter in Control Panel from Emu panel you can press the yellow button (added also on webif)
The menu Script can be opened from Control panel pressing 0(zero)
To change the positions of Channel name or Clock you can modified by telnet the values
(Horizontal)(50 & 80 are the default values)
echo 50 > /var/etc/SifTeam/conf/altOraOSD
echo 80 > /var/etc/SifTeam/conf/altCanaleOSD
(Vertical)(10 is the default value)
echo 10 > /var/etc/SifTeam/conf/oriOraOSD
echo 10 > /var/etc/SifTeam/conf/oriCanaleOSD
Errors:
----------
If the following message appear "..curl_global_init.."...please restart enigma(Menu-5-restart enigma)
* The option Move OSD is no longer available but you can install it as external plugin
To use the old /Var you should edit the file /var/tuxbox/config/enigma/config
and change the text "s:/ezap/ui/skin=/share/tuxbox/enigma/skins/golden.esml" in
"s:/ezap/ui/skin=/share/tuxbox/enigma/skins/bluzzy3_adv.esml"
** The Q-box has not all the functions of the other boxes...for example to open the Control Panel you must press blue>yellow
http://www.sat-universe.com/showthread.php?p=454800
http://upek.sputnik-sat.info/index.p...now=2009-09-12
http://dreambox.sifteam.eu/index.php...fTeam%201.9.4/

[thunderstorm6]

Tideglo 0.5.5 AAF SummerDream 2.0 IP-Box 9000/900/910 USB Image

Basis Team Ducktales Tideglo




AAF-SummerDream-2.0

release 0.5.5
*********************
Ok from this release you will get a nightly build image. (this means i will not support stupid options like: panels, plugins and so on)
Soon a sifteam image will be out with panel and many options enabled.
I choose this way because i want that cuberevo community increase more! Many teams are involved in E2 now, so
each one can do his choice, and sifteam images will be out with another image (obviously based on the same Nightly build image version)
I will publish also how to build your own flash image, so every team can do it.

- new bootlogo (thanks arken)
- added bulgarian language
- added autofs
- added openvpn
- added openssl library
- added 576i to AutoResolution plugin
- added ftpput
- added ftpget
- added netstat
- "fixed" signal level on tuners
- teletext exit with "exit" button on remote
- fixed aspect on screen when exiting from teletext. If watching 16:9 format, it is shrinked, so looks like 16:6 or something
- fixed positioner setup
- fixed teletext subtitles
- remapped few buttons
- fix for DVB subtitles wich were not shown on some skins
- fixed bootlogo view on SD television
- fix the issue with stopping playback while it is paused
- incorporated the new web interface version (04/06/2009)
- fixed fast forward for MP3 in MediaPlayer
- enabled forwarding the second transport stream to the decoder
- fix avi 23.976fps/24.976fps/29.976fps
- avi: fix audio track selection early support for redirecting in http streaming
- added .rec extension file support
- CI cam drivers handling should now be better
- lot of fixes on PicturePlayer
- lot of fixes on MediaPlayer
- modified epgCache load to allow the load on e2 starts (now crossEpg works perfectly)
- fix avi 23.976fps/24.976fps/29.976fps
- added estonian language
- allowed to record/stream multiple channels from the same transponder (FTA only)

- There were a bug when a freeze happen on HD and SD channels, that bug showed you a full green pixel screen or an image repeating loop,
well this is bug was really hard to find for me and i'm not sure i've found all the cases when it happens, so... let me know if it happens again.

Many people asked me to add smart card drivers made by pacco, but i've not did them, so i will not add them like part of my images.
They can be added manually by everyone and each team made the possibilty to download and install them, so i will not add them until
i will make my own version (wich i don't know when and how it will be ready, you can use the pacco's version wich is good enought)

Enjoy it! Tideglo






AAF:
+ AAF-Panel V4.2
+ Softcam-Panel V0.21
+ Addon-Manager V1.78
+ MediaCenter (Beta)
+ Bootanimation (ausschaltbar unter AAF-Panel - Setup)
+ Reboot und Shutdown Animation
+ AAF-Board Viewer
und vieles mehr....

Danke an Tideglo fьr das super Basis Image und alle die dieses Image ermoeglicht und getestet haben.
http://upek.sputnik-sat.info/content.php?id=6665
http://upek.sputnik-sat.info/index.p...now=2009-09-03

[thunderstorm6]

UFM image 10513 for IPBOX 910 / 900 / 91 / 7000 / 200 build.003


04.09.2009

Based on DGS release 10513
Unique features of this firmware

* Ability to completely disable all unnecessary services to you
* Quickstart receiver (as a consequence of the preceding paragraph)
* Fast switching softkamov on the fly by Color button in any order you choose
* Switching range 4:3 / 16:9 on the fly by Color button in any order you choose
http://upek.sputnik-sat.info/index.p...now=2009-09-05

[thunderstorm6]

Abcom enigma1 beta for 900,910,91


AB Enigma1HD_9xxx_110609beta


This is Beta version of AB Enigma1HD for AB IPBox 9000HD/900HD/910HD and 91HD



How to install:

- unzip downloaded file to your PC
- Copy file from your PC into USB flash memory and rename it into "usb_update.img"
- IMPORTANT: Use "Safety remove USB device" function before disconnecting your USB flash memory from PC !
- Turn off your receiver (Standby+OK on front panel) and connect USB memory to USB (host) connector on your receiver.
- Press and hold Standby on front panel until "BOOTING" message appears on display,
press Up button . "USB UPGRADE" message should appear on display of your receiver - software update performs automatically.
- Wait until DONE message appears and restart your receiver.



How to install E2 HD (USB stick version) via internet with E1 HD installed inside box (Multiboot function):

- connect USB flash memory to receiver and formatt it to ext3
- go to Menu - Setup - System settings - Harddisc setup - line "connected"and make sure if USB is mounted to /hdd or /mnt/sda (if you don´t have installed HDD) or to /mnt/sdb (if you have installed HDD)!!!
- press blue button and go to "tarx", press OK, and choose "Download Addon". You will see "Enigma2.sda" and "Enigma2.sdb" files for each model of HD boxes.
"Enigma2.sda" - choose only when you don´t have installed HDD
"Enigma2.sdb"- choose only when you have installed HDD
- after choosing correct file, download will start and after that confirmation window will appear - press OK on "yes"
- when you will see window with "OK", you have successfully installed E2 HD on USB
- if you want run E2 HD just turn box off (Standby+OK on front panel),that press standby button and press and hold number 2 or 3 (it depends of installed HDD)

number 1 - booting from internal flash
number 2 - booting from sda
number 3 - booting from sdb
number 4 - booting from nfs
number9 - booting from set up enviroment 192.168.1.25 ipaddr,
192.168.1.102 server ip, nfsroot
/home/ipbox/rootfs


This can be helpfull:

- IMPORTANT: By manual searching of channels ever press "retune" after inserting all parameters.
This behavior differs from original E1, so don't forget about it when you need to do manual scan
- In Expert setup you can find "User reset" - this returns box to first setup with basic setting for 4 satellites
- In menu "Common Interface" you can find this: "can handle two services" - when you marked it to on, it is possible one scrambled channel record and one scrambled channel from same TP watch.
Note: this function must be also supported by CAM module!(e.g.Cryptoworks from Mascom supports this)
- If use 720p or 1080i mode with teletext, after teletext switch on, press Menu button and activate "true type fonts" item.

Please note that this is E1 HD, so in IP9000HD is supported only first tuner.

Known issues:

- DVB-C tuners not supported
- internal card readers don´t work (external USB card readers work)
- works upper CI slot only, after inserting CAM module you have to restart it in menu of box. After every restarting of box you have to put out CAM from box and put in to box and reset CAM in menu of box.
- DVB and TXT subtitles are not working
- problem with formatting some 3,5" HDD´s
- some bugs by playback recordings from HDD
- it is not possible timer recording from EPG
- SD menu graphic supported only
- installed games don´t work in 720p and 1080i mode. (work in 576i and 576p mode)
- signal indicators don´t work
- in some situations box doesn´t present any channels, need reinsert CAM and reset CAM in Common Interface menu


NOTE: Source code of AB Enigma1HD will be released ASAP. Stay tuned
http://upek.sputnik-sat.info/index.p...now=2009-09-15
http://upek.sputnik-sat.info/content.php?id=6883
http://upek.sputnik-sat.info/content.php?id=6882
http://upek.sputnik-sat.info/content.php?id=6881

[thunderstorm6]

WLG Image E1 by TeamNTM Relax

Il Team NTM è lieto di presentarvi la WLG Image, nata solo ed esclusivamente grazie alla passione per l'hobby del sat e dell'open sources.
L'immagine si basa sui public sources Nemesis 1.0.

Inoltre sono stati utilizzati dal team PLI (dai sorgenti pubblici OpenPLI), il cardinfo_script e lo streamts (scaricabile dal pannello online).

Ringraziamo tutti coloro che hanno resi pubblici i loro sources, rendendoli un'ottima base di studio.

Il Team NTM ha sviluppato la WLG Image senza emulatori né chiavi in essa contenuti e non supporta nessun tipo di backup o qualunque suo uso illegale. Non si ritiene in nessun modo responsabile dell'uso improprio dell'immagine fatto da terzi.

Si ringraziano tutti i betatester:

reking, onopkos, yu-gi-oh, meganpork, sirietto, seccoleo, filipponokia, cupidz, ^ZioGià^ e Pappa.

Ringraziamenti speciali
(in rigoroso ordine alfabetico)

Fox, Gianathem, matrix10 (per la concessione dell'uso delle skin enigma1), Omicron, Pappa (WLG Picon), piefav e Racale.

Decoders:

Dreambox 7000 - Dreambox 500 - Dreambox 56x0
Ipbox 200 32Mb Ram - Ipbox 200 64Mb ram - Ipbox 250 - Ipbox 350 - Ipbox serie 4xx
Attenzione a non confondere la versione Ipbox200 64Mb con la versione Ipbox200 32Mb. Rischiate il blocco del decoder recuperabile solo con jtag

Ulteriori immagini per altri modelli verranno rilasciate in futuro.

per loggarsi:

login: root
password: wlgbyntm

Enigma cvs del 20.10.2009
Linux version 2.6.9
Web Interface: 6.0.4-Expert
Busybox 1.01

Descrizioni
Bottone BLU = NTMPanel
Bottone GIALLO = lista plugins
Bottone VERDE = orologio analogico
Installazione addons da panel online
Installazione addons manuale
Personal server online
Frontend grafico inadyn
Password manager
Frontend grafico cron daemon
Sposta cartella var
Autospegnimento
Frontend grafico Gestione porte
Frontend grafico dropbear ssh server
Frontend grafico openvpn
Frontend grafico nfsserver
Gestione script personalizzati utenti
Gestione Picon
Manager cartella film
Ram info
Net info
Card Info
Sincronizzazione ora da internet

Il nostro motto è WLG forever






http://upek.sputnik-sat.info/index.php?date_now=2009-11-23