Чат

🕑 ↗
За да пишеш, трябва да си влязъл в профила си.

Drivers DM 800 Latest Updates

Започната от ТИНТИН, 26-06-2009, 17:43

« назад - напред »

0 Потребители и 2 гости преглеждат тази тема.

ТИНТИН

New drivers

Code:
Update of 25/06/2009

- DVB-S2 on Alps-Tuner with SR=30000 on DVB-S2 transponder was fixed,
- vtuner: POLLHUP was changed to POLLIN, if you're using this,
please update your tool,
- vtuner: PVR playback now works together with vtuner
- DM8000/DM800: muted some noises while zapping channels. Due to a
workaround for Harman-Kardon-Receivers, noises when switching between
DTS and PCM might occur, we are investigating for a better fix.
- DM8000: ALSA playback was improved,
- 2D accel now support palettes - this will fix DVB Subtitles on HD-
Skins with recent enigma2,
- "dvbnet" was disabled previously, and is enabled now.
- DM800: some more checks

Файла се намира на ъплоуд центъра в     Home / Priemnici / Dreambox/dreambox-dvb-modules_2.6.12-5.1-brcmstb-dm800-20090625-r0_dm
"UNIX is basically a simple operating system, but you have to be a genius to understand the simplicity." -- Dennis M. Ritchie

ТИНТИН

drivers dm800-20090630


Файла се намира на ъплоуд центъра в Home / Priemnici / Dreambox/    dreambox-dvb-modules_2.6.12-5.1-brcmstb-dm800-20090630-r0_dm
"UNIX is basically a simple operating system, but you have to be a genius to understand the simplicity." -- Dennis M. Ritchie

PhilipZ

Цитат на: CANALSAT;17143drivers dm800-20090630


Файла се намира на ъплоуд центъра в Home / Priemnici / Dreambox/     dreambox-dvb-modules_2.6.12-5.1-brcmstb-dm800-20090630-r0_dm


Трябва да се преименува файла на zip след което няколко пъти има rar който ту има ту няма разширение. Който го сваля да не се чуди.:)

Чък Норис

Цитат на: PhilipZ;17145Трябва да се преименува файла на zip след което няколко пъти има rar който ту има ту няма разширение. Който го сваля да не се чуди.:)

Няма смисъл от преименуване, просто му задай отваряне с ...

ТИНТИН

Цитат на: PhilipZ;17145Трябва да се преименува файла на zip след което няколко пъти има rar който ту има ту няма разширение. Който го сваля да не се чуди.:)
Понеже при по малките файлове .rar, tar.gz системата не ги разпознава с такова разширение -както е файла директно със 7zip ги правя на zip -за да се разберем със системата;). За по големите файлове на ъплоуд центъра ги оставям във формата в който съм ги свалил.
"UNIX is basically a simple operating system, but you have to be a genius to understand the simplicity." -- Dennis M. Ritchie

ТИНТИН

update of 07.07.2009

Файла се намира на ъплоуд центъра в Home / Priemnici / Dreambox/dreambox-dvb-modules_2.6.12-5.1-brcmstb-dm800-20090707-r0_dm
"UNIX is basically a simple operating system, but you have to be a genius to understand the simplicity." -- Dennis M. Ritchie

tonibg

20.07.2009

Updated DVB modules drivers for Dreambox DM800.

Changes:
dreambox-dvb-modules.bb: update dm800 drivers
small fix in still experimental vtuner stuff
 
dreambox-dvb-modules_2.6.12-5.1-brcmstb-dm800-20090720-r0_dm800.rar

tonibg

Update of 20.08.2009
 
Unpack and copy then to /lib/modules/2.6.12-5.1-brcmstb-dm800/extra/
 
dreambox-dvb-modules_2.6.12-5.1-brcmstb-dm800-20090820-r0_dm800.rar
 
dreambox-dvb-modules.bb: update dm800 and dm8000 drivers (20.08.2009)

- better H264 compatibility ... (higher bitrates, more reference frames)
- dm800 fix for playback of MPEG2 HD 1080p (converted H264 file with mkv2vob was not working.. green screen)
- add VTUNER_SET_FRONTEND_INFO ioctl (ioctl id 6) to set a struct
dvb_frontend_info* to set frontend capibilities and frontend type THIS
DRIVERS NEEDS AT LEAST SECONDSTAGE 74 !!!!!!!!!!!!

tonibg

#8
Drivers For DM 800
 
Update of 05.10.2009
 
dreambox-dvb-modules.bb: update dm800/dm8000 drivers
changes both:
- implement FE_TIMEDOUT flags in all tuner drivers (used in e2 to speedup the service searching a little bit)
- add new option to change scaler sharpness (/proc/stb/vmpeg/0/pep_scaler_sharpness)
- fix kernel freeze caused by demux problem when try to use more the 64 section filter (i.e. much recordings on the same transponder are running)
- deinterlacer optimizations
please no more use "off" when the vertical input/output resolution are not equal
"bob" is the equivalent to the old "off" option... but "auto" should generate better quality as off/bob in most case .. so changing the default behaviour is no more needed
changes dm800:
- fix stuttering video with enabled deinterlacer (i.e. N24 ticker)
- add some PEP options to /proc/stb/vmpeg/0 (pep_brightness, pep_saturation, pep_hue, pep_contrast, pep_block_noise_reduction, pep_digital_contour_removal, pep_mosquito_noise_reduction)
changes dm8000:
- fix no more working 1080p24/25/30 output (in 20090916 drivers)
- fix stuttering video on (cvbs) analog output when no hdmi cable was connected but a DVI option was configured
 
dreambox-dvb-modules_2.6.12-5.1-brcmstb-dm800-20091005-r0_dm800.rar

tonibg

Drivers For DM 800

Update of 13.10.2009

changes dm800
-------------
* fix completely broken 1080p24/25/30 output (broken since previous drivers)
* fix strange kernel ooopses on flash access (i.e. packages upgrades or install new ipk packages)

changes dm800 and dm8000

------------------------
* fix alps_bsbe2 detection (some NIM modules couldn't be detected since previous drivers)
* small fixes on "no tuner lock" handling .. the min timeout is now 1500 msec
this hopefully fixes "tune failed" problems introduced with previous drivers
* fix frequently stuttering on put out content with 23.976fps and choosed 24fps outputmode (i.e. 1080p24, 720p24)
the same for 29.97fps on 30fps and 59.94 on 60fps
 
 
dreambox-dvb-modules_2.6.12-5.1-brcmstb-dm800-20091013-r0_dm800.rar

tonibg

Drivers For DM 800_14-10-09
 
 
* fix tone amplitude setting for alps_bsbe2 tuner
this fixes "tune failed" problems introduced in previous drivers
 
 
dreambox-dvb-modules_2.6.12-5.1-brcmstb-dm800-20091014-r0_dm800.rar

heracle

root@dm800:/tmp# ipkg install dreambox-dvb-modules_2.6.12-5.1-brcmstb-dm800-20091014-r0_dm800.ipk
Upgrading dreambox-dvb-modules on root from 2.6.12-5.1-brcmstb-dm800-20090612-r0 to 2.6.12-5.1-brcmstb-dm800-20091014-r0...
Nothing to be done
An error ocurred, return value: 1.
Collected errors:
ERROR: Cannot satisfy the following dependencies for dreambox-dvb-modules:
dreambox-secondstage (>= 74-r0)
 
и после...
 
root@dm800:/tmp# ipkg install dreambox-secondstage_75-r0_dm800.ipk
Upgrading dreambox-secondstage on root from 73-r0 to 75-r0...
Configuring dreambox-secondstage
*** raw flash write tool. Don't have bad sectors or it won't work.
*** uncompressing... ok!
*** FLASH_GEOM: 04000000 00004000 00000200 00000010 00000005
*** CRC check ignored!
*** stage 0: ..00000000 | 00000008..00000014 (12 bytes)
*** stage 1: ..00040000 | 00000018..00032ec8 (208560 bytes)
*** stage 2: ..00000000 | 00032ecc..00032ecc (0 bytes)
*** stage 3: ..00000000 | 00032ed0..00032ed0 (0 bytes)
*** bad block list: none
*** writing.. ok!
*** done!
 
:hammer:

tonibg

Drivers 29.10.2009
 
drivers (20091012 -> 20091029)
------------------------------
* add tuner timedout signal (needed for faster enigma2 service searching)
* work on prerolling after video buffer flush during playback
 
dreambox-dvb-modules_2.6.12-5.1-brcmstb-dm800-20091029-r0_dm800.rar

tonibg

this is a experimental driver release! latest stable is 20091118

changes both
* some fast winding and slowmotion fixes
* fix strange audio noise on skip fast forward/backward (2nd try)
* improved position after seek/play transition a bit (2nd try)
* improved playback engine (lower cpu load)

changes dm8000
* fix not working Gigaset Premium CI (not included in stable drivers yet)
 
 
dreambox-dvb-modules_2.6.12-5.1-brcmstb-dm8000-20091125-r0_dm8000.rar


SatShop.bg
Ъплоуд център DishPointer Сателитни изстрелвания