Имиджи за DM 800 HD

[Крал Артур]

Вече излезнаха първите два имиджа за този приемник - http://www.dreamboxworld.com/dbw/index. ... Itemid=121

     

Приемика го няма още, но все пак  :lol:

[Крал Артур]

OoZooN-CVS-dm800-20080302 - Енигма 2 е готова      

[Ланселот]

Няма ли да се появи вече на българския пазар, че тръпна да разбера ценичката му.  ;;689  

[Джак]

То го няма на чуждия, ти за българския се цаниш.
Аз лично ще поизчакам китайците да му направят някое добро копие, защото научих, че вече точели зъбки към DM800.  

[Джак]

Дано, ама сигурно ще мине годинка-две преди да го копират...  :?
А аз няма да чакам толкова...  

[Ланселот]

То го няма на чуждия, ти за българския се цаниш.
Аз лично ще поизчакам китайците да му направят някое добро копие, защото научих, че вече точели зъбки към DM800.  

@Момчи сигурен ли си, че го няма? Защото аз не мисля така...
Ако искаш мога да ти изпратя няколко сайта на ПМ..  

DREAM Dreambox DM 800-C HD PVR
DVB-C, HDTV, DVI, Scart, 10/100 Mbps, RS-232, USB 2.0
 
719.00 CHF = 879.4 BGL само, че в България не се знае каква ще му е цената.

[Джак]

Аааа, те в сайтовете го обявиха за продажба още преди 3 седмици с най-различни цени само че още не е наличен според последната информация която имам. Но кой знае, може нещата да са се променили. То си е време вече.

[Ланселот]

Нека да се появи на българския пазар пък тогава ще му мислим.

[Крал Артур]

По последни данни към края на април  

[Ники]

най - рано средата на Май го чакат
 

[Крал Артур]

boxman-image-dm800-20080417

ein neues, aktuelles OE-Image von heute Abend f?r die 800er:

OE Build Configuration:
BB_VERSION = "1.6.8"
OE_REVISION = "format_version "1"

new_manifest [0000000000000000000000000000000000000004]

old_revision [f78d232803ee7e41ab23a773b023fd7e932df21f]"
TARGET_ARCH = "mipsel"
TARGET_OS = "linux"
MACHINE = "dm800"
DISTRO = "opendreambox"
DISTRO_VERSION = "1.5.0"
TARGET_FPU = "soft

Treiber vom 11.04.2008!

Changelog siehe Anhang.

md5 f?r das Image: e6affb377f041302f09570f542d2dc50

OoZooN-CVS-dm800 - 20.04.2008

here is my latest image for DM 800 HD.
Enigma is of 20.04.2008
the plugins are of 20.04.2008
the drivers are of 11.04.2008
new secondstage is 58
changes at Enigma2 can be pursued HERE

my changes at oe:

own bootlogo's, artwork by clumsy
changes of dccamd start
dccamd not included in image, can be installed via plugin download

systemplugins:

configurationbackup
frontprocessorupgrade
hotplug
positionersetup
satelliteequipmentcontrol
satfinder
skinselector
softwareupdate
videomode
videotune

plugins:

cutlisteditor
merlinbrowser
graphmultiepg
ipkginstaller
mediaplayer
mediascanner
pictureplayer
socketmmi
antiscrollbar
autotimer
dyndns
emailclient
epgrefresh
fritzcall
httpproxy
imdb
lastfm
logomanager
movietagger
netcaster
simplerss
startuptostandby
trafficinfo
vlcplayer
webcamviewer
webinterface
werbezapper
wirelesslan
aioscreengrabber
tuxcom
hddtemp
mountmanager
userscripts

download only plugins

dccamd
barryallen
cronmanager
orwell
pauli
renamemovie
screensaver
skintransp
timeshiftsave
wastebasket
movieretitle
permanenttimeshift
moviecut

Skins:

x2-line
blackbox
cromline
cromline.cobolt
glassline
shadowline

x2-line
merlin-racer
blueline
blueline.extended
blueline.single
dreamtv
flatline
flatline.blue
greenline
greenline.extended
greenline.single
greyline
greyline.3d
greyline.extended
greyline.single

changes at enigma:

MHW epg active
.recordings patch

this image is updateble via plugins -> softwareupdate over internet!


OE Build Configuration:

BB_VERSION = "1.6.8"
OE_REVISION = "format_version "1"
new_manifest [0000000000000000000000000000000000000006]
old_revision [f78d232803ee7e41ab23a773b023fd7e932df21f]
TARGET_ARCH = "mipsel"
TARGET_OS = "linux"
MACHINE = "dm800"
DISTRO = "opendreambox"
DISTRO_VERSION = "1.5.0"
TARGET_FPU = "soft"

Borisi-CVS-dm800 - 26.04.2008

Hier mal ein aktuelles CVS dm800 HD Image
Enigma stand ist 26.04.2008
OE Build Configuration:
BB_VERSION = "1.6.8"
OE_REVISION = "format_version "1"
TARGET_ARCH = "mipsel"
TARGET_OS = "linux"
MACHINE = "dm800"
DISTRO = "opendreambox"
DISTRO_VERSION = "1.5.0"
TARGET_FPU = "soft"

EDG-Nemesis Perfect Flash plus v.1.0 for DM800HD - 03.05.2008

Technical Infos:
* Enigma of: 03.05.2008
* New Driver: 30.04.2008
* Linux version 2.6.9
* GCC 4.1.1 Original CVS
* Kernel 2.6.12.6
* Busybox 1.0.1
* Tuxtxt 1.95
* for use in flash or MB (via HDD)
* Date image 05.05.2008

Features:
* SKYEpg 0.5b (include automatic downloader with crond...)
* Crond manager
* Tuxbox commander
* Camd Panel (with xxxmanager)
* xxxmanager for softcam and separated xxxxreader
* Cam predisposition
* Ecm info
* Advanced Info xxx
* Info advanced decoding
* Satellites.xml at 29.04.2008

No xxxs, No xxxs included

Regards:
- Nemesis
- Ronaldd
- developpers and betatesters
=================================================
!!! ATTENZIONE - IMPORTANTE:
!!! QUESTO FIRMWARE NON CONTIENE CHIAVI, NE' xxxLATORI, NE' INDIRIZZI PER SCARICARE MATERIALE ILLEGALE DI NESSUN TIPO.
!!! EDG-NEMESIS NON E' RESPONSABILE IN NESSUN MODO DELL'USO CHE GLI UTENTI NE FARANNO, DI LORO SPONTANEA VOLONTA'.

!!! WARNING - IMPORTANT DISCLAIMER:
!!! THIS FIRMWARE DOES NOT INCLUDE xxxS, NOR xxxLATORS, NOR URLS FOR DOWNLOADING ILLEGAL STUFFS OF ANY TYPE.
!!! EDG-NEMESIS IS NOT RESPONSIBLE IN ANY WAY FOR WHAT THE USERS WILL DO WITH THIS FIRMWARE.
=================================================

Patch for CCcam and Key-updater for EDG-NEMESIS PERFECT FLASH 1.0 DM800HD

-Copy all files in to etc and usr directory
-Change attribute with "CHMODE 775"
-Reboot

Enjoy :-)

scvs-image-dm800-20080508073427 - 08.05.2008

Enigma = 08.05.2008
Plugins = 08.05.2008
Treiber/Module = 30.04.2008
Second Stage Bootloader = 59

Ich habe das experimental, also 2.5 aktiv gesetzt bei Enigma und Plugins

NOTE: build 200805080734: started

OE Build Configuration:
BB_VERSION = "1.6.8"
OE_REVISION = "format_version "1"

new_manifest [0000000000000000000000000000000000000006]

old_revision [09bfa2d6cfe627febd6a831913957e6c9ab4e58c]"
TARGET_ARCH = "mipsel"
TARGET_OS = "linux"
MACHINE = "dm800"
DISTRO = "opendreambox"
DISTRO_VERSION = "1.5.0"
TARGET_FPU = "soft"

[Крал Артур]

EDG-NEMESIS PERFECT FLASH 1.0 DM800HD

[Джак]

Аз очаквах нещо много по-стилно...

[Крал Артур]

PLi® image for DM800HD

A new PLi® Dreambox release is available.

This release contains an updated Iolite DM7025 image and the brandnew Iolite DM800 image!

The Original PLi® 'Iolite May 2008' suite contains the following images:

PLi®-Iolite-DM7025-v4904
PLi®-Iolite-DM800-v4904

Use the downloadsection on our website to be sure to download our original PLi® images.


Warnings:
- Online software update will almost certainly fail on your dm7025 (not enough free storage)
We advise you to flash the new nfi, instead of attempting to update.
- It`s prefered do a clean install only!
- Because of the new initial setup wizard, your settinglist will be cleared when you update to the latest version.
Simply restoring an old backup will not work, because that triggers the wizard to restore to the default again.
(if you want to restore an old backup manually, add 'config.misc.defaultchosen=false' to /etc/enigma2/settings to avoid the settinglist to be cleared)


Highlights:
- UPnP mediaserver / client plugins
- IDE/SCSI harddisk manager
- DVD player plugin
- Complete piconsets
- Screen position adjust plugin (DM7025 only)


Details of what's added and fixed since the initial 'December 2007' and 'January 2008' PLi® Iolite release


Enigma2:
- Enigma2 repository May 12th 2008
- PLi® repository May 12th 2008
- 20080430 drivers for DM7025
- 20080511 drivers for DM800
- Some CryptoInfo convertor types and functionality added
- ScanSetup:
* Cable transponder 'blind'-scan: make sure we don't miss transponders when we receive incomplete lines in our dataAvail callback
* Default cable scan 'steps' instead of 'bands', 'bands' doesn't find all transponders on Dutch Cablenetwork
- Don't create a 'largefile' ext3 fs on a small (<=4GB) device, that wouldn't allow us to e.g. install a lot of picons on a relatively small CF
- Added picon install location selection screen
- Only allow to install picons on fileystems which support symlinks
- Always allow picons to be installed on HDD, with the new selection screen it's your own responsibility
- Rewrote harddisk manager, support scsi and ide devices
- Show correct harddisk capacity
- MediaPlayer:
* Support ':' in paths
* Use an absolute path when a playlist entry starts with 'http://'
- RecordTimer (and parseEvent): fallback to the extended description, when an event doesn't have a short description
- Join short/extended description, when the short description is so long that it looks like a situation where short and extended contain parts of a single full description


EPG
- Fill Now/Next with EPGcache, untill EIT arrives
- Implemented Now/Next refreshtimer, started when the EIT reader stops with an error
(EPGcache now/next will be used instead)
- Implemented context menu for eventview (open with 'menu' or 'info' key while in eventview window)
* IMDB plugin installs itself into this menu


Enigma2 Plugins:
- PPanels: avoid BSOD when 'pipe' fails (it often fails with errno 12, 'Cannot allocate memory')
- Remotecontrol channel config plugin
- LipSync plugin: store audio delay as Enigma2 config values, set audio delay at startup, no longer depend on /etc/init.d/bootup to copy the values at bootup
- RSS reader: fix some escaped characters in the RSS data
- New RSS Reader feeds
- MountManager plugin:
* Do network mounts when Enigma2 starts, no longer depend on /etc/init.d/bootup to perform the mounts
- enigma2 plugins 20080512 (including dvdplayer)
- opencam 2.0.13
- mgcamd 1.29
- CCcam 2.08
- rqcamd 0.74
- scam 3.29


UPnP Plugins:
- UShare mediaserver
- djmount mediaclient


Skins Enigma2:
- All Global provider picons for Radio and TV per Satellite added
- Dutch TVHome picons added (thx to Xilorp)
- 'CryptoInfo' convertor added.
- Torkoise Skin added:
* updates by mimi74
- Nemesis.BlackBox skin:
* 'DecodeInfo' as example for CryptInfo converter usage added
- Rewrote Picon renderer, some speedups, check /picon/, check if /media/hdd/picon/ exists at startup, add that path to the search list only if it exists
- Nemesis Chromeline Skin added (PLi modded)
- Glassline Skin added (PLi modded)


Languages:
- Several languages updated


Other:
- Global satellites.xml May 11th 2008
- Scce symlink added

...And many low level changes, fixes and updates.

Detailed info, Wiki, FAQ's, HowTo's, TechNotes and information about this and the previous PLi® releases can be found on the PLi® Website:

[Крал Артур]

Nabilosat Enigma2 Black Hole - DM800 PVR v0.2b
We will all fall deep inside the Black Hole...there is no way out

What is new in this version 0.2b
New Video Drivers.
New OE entirely rebuild
New Enigma 2.5 experimental CVS of 11.6.2008
New bootlogos
Now working FFWD up to 128x
New emu starting inside Enigma2
Added Nfs Server panel
Automatic Enigma2 restart for Nabilo Server addons

Enigma2 version date: 11 June 2008
Openvpn Kernel module support included. Openvpn fully embedded in graphic interface.
Default Skin : Army Niro
Alternative Skin : Porto Invader