Проблем с разкодиране на канали

[piris]

Здравейте, взех си карта Conax на Satellitebg и не ми разкодира каналите, къде да търся проблема?
Ето лога на oscam-a:
2011/04/13  0:54:04 2AAC6850 s >> OSCam <<  cardserver  started version 1.00-unstable_svn, build #4574 (mips-tuxbox-linux)
2011/04/13  0:54:04 2AAC6850 s version=1.00-unstable_svn, build #4574, system=mips-tuxbox-linux, nice=-1
2011/04/13  0:54:04 2AAC6850 s client max. idle=120 sec, debug level=0
2011/04/13  0:54:04 2AAC6850 s max. logsize=32 Kb
2011/04/13  0:54:04 2AAC6850 s client timeout=5000 ms, fallback timeout=2500 ms, cache delay=120 ms
2011/04/13  0:54:04 2AAC6850 s auth size=4976
2011/04/13  0:54:04 2AAC6850 s services reloaded: 0 services freed, 1 services loaded
2011/04/13  0:54:04 2AAC6850 s userdb reloaded: 1 accounts loaded, 0 expired, 0 disabled
2011/04/13  0:54:04 2AAC6850 s signal handling initialized (type=sysv)
2011/04/13  0:54:04 2AAC6850 s 37 service-id's loaded
2011/04/13  0:54:04 2AAC6850 s can't open file "/var/tuxbox/config/oscam.tiers" (err=2), no tier-id's loaded
2011/04/13  0:54:04 2AAC6850 s can't open file "/var/tuxbox/config/oscam.provid" (err=2), no provids's loaded
2011/04/13  0:54:04 2AAC6850 s can't open file "/var/tuxbox/config/oscam.ird" (errno=2) irdeto guessing not loaded
2011/04/13  0:54:04 2AAC6850 s monitor: initialized (fd=8, port=988)
2011/04/13  0:54:04 2AAC6850 s camd33: disabled
2011/04/13  0:54:04 2AAC6850 s camd35: disabled
2011/04/13  0:54:04 2AAC6850 s cs378x: disabled
2011/04/13  0:54:04 2AAC6850 s newcamd: disabled
2011/04/13  0:54:04 2AAC6850 s cccam: disabled
2011/04/13  0:54:04 2AAC6850 s radegast: disabled
2011/04/13  0:54:04 2AAC6850 s http thread started
2011/04/13  0:54:04 2AAC6850 s creating thread for device /dev/sci0
2011/04/13  0:54:04 2AAC6850 s loadbalancer: can't read from file /tmp/.oscam/stat
2011/04/13  0:54:04 2AAC6850 s waiting for local card init
2011/04/13  0:54:04 2AEFF4B0 h HTTP Server listening on port 8888
2011/04/13  0:54:04 2AFFF4B0 r reader thread started (thread=2AFFF4B0,  label=satellitebg, device=/dev/sci0, detect=cd, mhz=500, cardmhz=357)
2011/04/13  0:54:04 2AFFF4B0 r satellitebg card detected
2011/04/13  0:54:05 2AFFF4B0 r ATR: 3B 34 94 00 30 42 30 30
2011/04/13  0:54:07 2AFFF4B0 r Maximum frequency for this card is formally 5 Mhz, clocking it to 5.00 Mhz
2011/04/13  0:54:08 2AFFF4B0 r type: Conax, caid: 0B01, serial: ХХХХХХХХХХ, hex serial: ХХХХХХХ, card: v64
2011/04/13  0:54:08 2AFFF4B0 r Providers: 1
2011/04/13  0:54:08 2AFFF4B0 r Provider: 1  Provider-Id: 000000
2011/04/13  0:54:08 2AFFF4B0 r Provider: 1  SharedAddress: 00000000
2011/04/13  0:54:08 2AFFF4B0 r found cardsystem
2011/04/13  0:54:08 2AFFF4B0 r Package: 1, id: 1010, date: 2011/04/04 - 2011/04/09, name: Preview1
2011/04/13  0:54:08 2AFFF4B0 r [conax-reader] ready for requests
2011/04/13  0:54:08 2AAC6850 s init for all local cards done
2011/04/13  0:54:08 2AAC6850 s anti cascading disabled
2011/04/13  0:54:08 2B0FF4B0 c plain dvbapi-client granted (user, au=satellitebg)
2011/04/13  0:54:08 2B0FF4B0 c dvbapi: reread priority file oscam.dvbapi
2011/04/13  0:54:08 2B0FF4B0 c dvbapi: 2 entries read from oscam.dvbapi
2011/04/13  0:54:12 2B0FF4B0 c dvbapi: [ADD PID 0] CAID: 0D06    ECM_PID: 0513    PROVID: 000000
2011/04/13  0:54:12 2B0FF4B0 c dvbapi: [ADD PID 1] CAID: 0B01    ECM_PID: 0522    PROVID: 000000
2011/04/13  0:54:12 2B0FF4B0 c dvbapi: new program number: 1522 (0D06:1522 unknown)
2011/04/13  0:54:12 2B0FF4B0 c dvbapi: try pids again #1
2011/04/13  0:54:12 2B0FF4B0 c user (0B01&000000/1522/67:1CAC): not found (94 ms) (of 1 avail 1)
2011/04/13  0:54:12 2B0FF4B0 c dvbapi: try pids again #2
2011/04/13  0:54:12 2B0FF4B0 c user (0B01&000000/1522/67:E401): not found (85 ms) (of 1 avail 1)

[Чък Норис]

Картата ти се нуждае от ъпдейт

2011/04/13  0:54:08 2AFFF4B0 r Package: 1, id: 1010, date: 2011/04/04 - 2011/04/09, name: Preview1

[piris]

Здравейте, пробвах какво ли не, но каналите не се отварят и картата не иска да се ъпдейнте започвам да се съмнявам във версията на oscam. Приемника ми е DM500 HD с Enigma2 и Gemini 5.1. Ако някои е подкарал такава карта то със коя версия на oscam е станало и от къде я е изтеглил?
Иначе ето с какво се опитвам да я подкарам:

oscam.conf
[global]
nice=-1
logfile=/tmp/oscam.log
disablelog=0
disableuserfile=1
maxlogsize=32
waitforcards=1
saveinithistory = 1
preferlocalcards=1
cachedelay=120

[monitor]
port = 988
aulow = 120
monlevel = 4
nocrypt = 127.0.0.1,192.168.1.1-192.168.1.255

[webif]
httpport=8888
httpallowed=127.0.0.1,192.168.1.1-192.168.1.255

[dvbapi]
enabled=1
boxtype=dreambox
user=user
au=1
ignore = 0d06:000000
priority = 0B01:000000

oscam.user
[account]
 user = user
 group = 1
 uniq = 0
 au= satellitebg
 monlevel = 4
 keepalive = 1

oscam.dvbapi
P: 0B01:000000
 I: 0d06:000000
 
оscam.server
[reader]
label                         = satellitebg
enable                      = 1
protocol                    = internal
device                       = /dev/sci1
pincode                     = 0000
services                     = SatelliteBG
fallback                      = 1
caid                          = 0b01
detect                       = cd
mhz                           = 500
cardmhz                     = 357
ident                         = 0b01:000000
group                         = 1
emmcache                  = 1,3,2
lb_weight                    = 100

[Чък Норис]

Приемника ми е DM500 HD с Enigma2 и Gemini 5.1.

оscam.server
[reader]
label                         = satellitebg
enable                      = 1
protocol                    = internal
device                       = /dev/sci1
pincode                     = 0000
services                     = SatelliteBG
fallback                      = 1
caid                          = 0b01
detect                       = cd
mhz                           = 500
cardmhz                     = 357
ident                         = 0b01:000000
group                         = 1
emmcache                  = 1,3,2
lb_weight                    = 100        

Редактирай, трябва да ти е:

Код [Маркирай кода] Разшири

device = /dev/sci0

Код [Маркирай кода] Разшири

[COLOR=Black]fallback = 0[/COLOR]А за сървисите трябва да си сигурен, че си ги oписал всичките в oscam.services.

[dvbapi]
enabled=1
boxtype=dreambox
user=user
au=1
ignore = 0d06:000000
priority = 0B01:000000

Изтрий тези 2 реда, те се задават в oscam.dvbapi, а като споменах oscam.dvbapi, махни игнора на 0d06, задаването на приоритет е достатъчно за да търси първо твоята карта.

[moreg]

Здравейте, пробвах какво ли не, но каналите не се отварят и картата не иска да се ъпдейнте започвам да се съмнявам във версията на oscam. Приемника ми е DM500 HD с Enigma2 и Gemini 5.1. Ако някои е подкарал такава карта то със коя версия на oscam е станало и от къде я е изтеглил?

Иначе ето с какво се опитвам да я подкарам:
 
oscam.conf
[global]
nice=-1
logfile=/tmp/oscam.log
disablelog=0
disableuserfile=1
maxlogsize=32
waitforcards=1
saveinithistory = 1
preferlocalcards=1
cachedelay=120
 
Сложи разстояние между равното ето така, иначе няма да тръгне, и където пишеш в оскам винаги да има разтояние между равното и отделните команди
 
oscam.conf
[global]
nice = -1
logfile = /tmp/oscam.log
disablelog = 0
disableuserfile = 1
maxlogsize = 32
waitforcards = 1
saveinithistory = 1
preferlocalcards = 1
cachedelay = 120

[piris]

благодаря за съветите, ще коригирам, а относно версията на oscam коя е стабилна и от къде да я изтегля, защото от стотиците версий незная тази която съм инсталирал дали е читава, а тя е oscam version 1.00-unstable_svn, build #4574 ,и още веднъж благодаря за бързите отговори.

[itzko]

Здравейте,

преди 3-4 дни взех карта на Сателайт БГ, пробвах с NewCS + CCCam, не можах да подкарам. Тръгна сама с Gbox и я оставих така. Днес обаче спря телевизията. Търсих навсякъде нещо за NewCS + CCcam, или поне за Gbox нищо не можах да открия. Някой може ли да даде конфигурационни файлове? Става въпрос за DM800. До сега си глеах ИРДЕТО и не съм имал подобни ядове...

Разбрах също, че е възможно и само с CCcam да върви, ако е така бих го  предпочел.

Мерси предварително!

[piris]

Здравейте отново, след направените промени каналите все още не се отварят, предполагам защото не се е ъпдейтнала, каква може да е причината и как да разбера дали oscam-a прави опити за ъпдейт на картата?

Ето и лога:
2011/04/17 23:06:53 2AAC6850 s >> OSCam <<  cardserver started version 1.00-unstable_svn, build #4574 (mips-tuxbox-linux)
2011/04/17 23:06:53 2AAC6850 s version=1.00-unstable_svn, build #4574, system=mips-tuxbox-linux, nice=-1
2011/04/17 23:06:53 2AAC6850 s client max. idle=120 sec, debug level=0
2011/04/17 23:06:53 2AAC6850 s max. logsize=32 Kb
2011/04/17 23:06:53 2AAC6850 s client timeout=5000 ms, fallback timeout=2500 ms, cache delay=120 ms
2011/04/17 23:06:53 2AAC6850 s auth size=4976
2011/04/17 23:06:53 2AAC6850 s services reloaded: 0 services freed, 1 services loaded
2011/04/17 23:06:53 2AAC6850 s userdb reloaded: 1 accounts loaded, 0 expired, 0 disabled
2011/04/17 23:06:53 2AAC6850 s signal handling initialized (type=sysv)
2011/04/17 23:06:53 2AAC6850 s 37 service-id's loaded
2011/04/17 23:06:53 2AAC6850 s can't open file "/var/tuxbox/config/oscam.tiers" (err=2), no tier-id's loaded
2011/04/17 23:06:53 2AAC6850 s can't open file "/var/tuxbox/config/oscam.provid" (err=2), no provids's loaded
2011/04/17 23:06:53 2AAC6850 s can't open file "/var/tuxbox/config/oscam.ird" (errno=2) irdeto guessing not loaded
2011/04/17 23:06:53 2AAC6850 s monitor: initialized (fd=8, port=988)
2011/04/17 23:06:53 2AAC6850 s camd33: disabled
2011/04/17 23:06:53 2AAC6850 s camd35: disabled
2011/04/17 23:06:53 2AAC6850 s cs378x: disabled
2011/04/17 23:06:53 2AAC6850 s newcamd: disabled
2011/04/17 23:06:53 2AAC6850 s cccam: disabled
2011/04/17 23:06:53 2AAC6850 s radegast: disabled
2011/04/17 23:06:53 2AAC6850 s http thread started
2011/04/17 23:06:53 2AAC6850 s creating thread for device /dev/sci0
2011/04/17 23:06:53 2AAC6850 s loadbalancer: can't read from file /tmp/.oscam/stat
2011/04/17 23:06:53 2AAC6850 s waiting for local card init
2011/04/17 23:06:53 2AEFF4B0 h HTTP Server listening on port 8888
2011/04/17 23:06:53 2AFFF4B0 r reader thread started (thread=2AFFF4B0, label=satellitebg, device=/dev/sci0, detect=cd, mhz=500, cardmhz=357)
2011/04/17 23:06:53 2AFFF4B0 r satellitebg card detected
2011/04/17 23:06:54 2AFFF4B0 r ATR: 3B 34 94 00 30 42 30 30
2011/04/17 23:06:56 2AFFF4B0 r Maximum frequency for this card is formally 5 Mhz, clocking it to 5.00 Mhz
2011/04/17 23:06:57 2AFFF4B0 r type: Conax, caid: 0B01, serial: **********, hex serial: ********, card: v64
2011/04/17 23:06:57 2AFFF4B0 r Providers: 1
2011/04/17 23:06:57 2AFFF4B0 r Provider: 1  Provider-Id: 000000
2011/04/17 23:06:57 2AFFF4B0 r Provider: 1  SharedAddress: 00000000
2011/04/17 23:06:57 2AFFF4B0 r found cardsystem
2011/04/17 23:06:57 2AFFF4B0 r Package: 1, id: 1010, date: 2011/04/04 - 2011/04/09, name: Preview1
2011/04/17 23:06:57 2AFFF4B0 r [conax-reader] ready for requests
2011/04/17 23:06:57 2AAC6850 s init for all local cards done
2011/04/17 23:06:57 2AAC6850 s anti cascading disabled
2011/04/17 23:06:57 2B0FF4B0 c plain dvbapi-client granted (user, au=satellitebg)
2011/04/17 23:06:57 2B0FF4B0 c dvbapi: 1 entries read from oscam.dvbapi
2011/04/17 23:07:00 2B0FF4B0 c dvbapi: [ADD PID 0] CAID: 0D06    ECM_PID: 04FD    PROVID: 000000
2011/04/17 23:07:00 2B0FF4B0 c dvbapi: [ADD PID 1] CAID: 0B01    ECM_PID: 0520    PROVID: 000000
2011/04/17 23:07:00 2B0FF4B0 c dvbapi: new program number: 151A (0D06:151A unknown)
2011/04/17 23:07:00 2B0FF4B0 c user (0B01&000000/151A/67:EBA3): not found (94 ms) (of 1 avail 1)
2011/04/17 23:07:01 2B0FF4B0 c dvbapi: try pids again #1
2011/04/17 23:07:01 2B0FF4B0 c user (0D06&0000C0/151A/B4:5680): rejected group (120 ms) (of 0 avail 0) (no matching reader)
2011/04/17 23:07:02 2B0FF4B0 c user (0B01&000000/151A/67:C63C): not found (88 ms) (of 1 avail 1)
2011/04/17 23:07:02 2B0FF4B0 c dvbapi: try pids again #2
2011/04/17 23:07:02 2B0FF4B0 c user (0D06&0000C0/151A/B4:2BBB): rejected group (120 ms) (of 0 avail 0) (no matching reader)
2011/04/17 23:07:06 2B0FF4B0 c user (0B01&000000/151A/67:EBA3): timeout (5031 ms) (of 0 avail 0)
2011/04/17 23:07:07 2B0FF4B0 c dvbapi: try pids again #3
2011/04/17 23:07:07 2B0FF4B0 c dvbapi: can't decode channel
2011/04/17 23:07:07 2B0FF4B0 c user (0B01&000000/151A/67:C63C): timeout (5025 ms) (of 0 avail 0)
2011/04/17 23:07:11 2B0FF4B0 c dvbapi: can't decode channel
2011/04/17 23:07:11 2B0FF4B0 c user (0D06&0000C0/151A/B4:2BBB): timeout (5095 ms) (of 0 avail 0)
2011/04/17 23:12:12 2B0FF4B0 c dvbapi: [ADD PID 0] CAID: 0D06    ECM_PID: 052D    PROVID: 000000
2011/04/17 23:12:12 2B0FF4B0 c dvbapi: [ADD PID 1] CAID: 0B01    ECM_PID: 050A    PROVID: 000000
2011/04/17 23:12:12 2B0FF4B0 c dvbapi: new program number: 1529 (0D06:1529 unknown)
2011/04/17 23:12:12 2B0FF4B0 c user (0B01&000000/1529/67:2D2B): rejected group (120 ms) (of 0 avail 0) (no matching reader)
2011/04/17 23:12:12 2B0FF4B0 c dvbapi: try pids again #1
2011/04/17 23:12:12 2B0FF4B0 c user (0D06&0000C0/1529/B4:062F): rejected group (120 ms) (of 0 avail 0) (no matching reader)
2011/04/17 23:12:16 2B0FF4B0 c user (0B01&000000/1529/67:3E3D): rejected group (120 ms) (of 0 avail 0) (no matching reader)
2011/04/17 23:12:17 2B0FF4B0 c dvbapi: try pids again #2
2011/04/17 23:12:17 2B0FF4B0 c user (0D06&0000C0/1529/B4:BAA3): rejected group (120 ms) (of 0 avail 0) (no matching reader)
2011/04/17 23:12:18 2B0FF4B0 c user (0B01&000000/1529/67:2D2B): timeout (5031 ms) (of 0 avail 0)
2011/04/17 23:12:22 2B0FF4B0 c dvbapi: try pids again #3
2011/04/17 23:12:22 2B0FF4B0 c dvbapi: can't decode channel
2011/04/17 23:12:22 2B0FF4B0 c user (0B01&000000/1529/67:3E3D): timeout (5031 ms) (of 0 avail 0)
2011/04/17 23:12:23 2B0FF4B0 c dvbapi: can't decode channel
2011/04/17 23:12:23 2B0FF4B0 c user (0D06&0000C0/1529/B4:BAA3): timeout (5043 ms) (of 0 avail 0)
2011/04/17 23:12:27 2B0FF4B0 c dvbapi: new program number: 1582 (0000:1582 unknown)

[Хиена]

Някой може ли да даде конфигурационни файлове? Става въпрос за DM800.

Инсталираш оскам и четеш пост №4 от тази тема!

@piris

Package: 1, id: 1010, date: 2011/04/04 - 2011/04/09, name: Preview1

Картата не ти е ъпната, гледай датата!
Звънни по телефона или се обърни към най-близкия представител!
Картите до колкото знам се продават с 5 дни безплатно гледане, след това трябва да се ъпне.

[itzko]

Здравейте,
отново аз... Инсталирах OSCAM - метнах bin-а в /usr/bin, конфигурационните файлове във /var/tuxbox/config Няма да слагам тук съдържанието им, тъй като е копирано 1:1 от темите тук. Ето какво показва лог файла:


>> OSCam <<  cardserver started at Mon Apr 18 22:02:27 2011
-------------------------------------------------------------------------------
2011/04/18 22:02:27 2AACA000 s >> OSCam <<  cardserver started version 1.00-unstable_svn, build #5047 (mips-tuxbox-linux)
2011/04/18 22:02:27 2AACA000 s version=1.00-unstable_svn, build #5047, system=mips-tuxbox-linux, nice=-1
2011/04/18 22:02:27 2AACA000 s client max. idle=120 sec, debug level=0
2011/04/18 22:02:27 2AACA000 s max. logsize=32 Kb
2011/04/18 22:02:27 2AACA000 s client timeout=5000 ms, fallback timeout=2500 ms, cache delay=120 ms
2011/04/18 22:02:27 2AACA000 s auth size=5032
2011/04/18 22:02:27 2AACA000 s services reloaded: 0 services freed, 1 services loaded
2011/04/18 22:02:27 2AACA000 s userdb reloaded: 1 accounts loaded, 0 expired, 0 disabled
2011/04/18 22:02:27 2AACA000 s signal handling initialized (type=sysv)
2011/04/18 22:02:27 2AACA000 s 33 service-id's loaded
2011/04/18 22:02:27 2AACA000 s can't open file "/var/tuxbox/config/oscam.tiers" (err=2 No such file or directory), no tier-id's loaded
2011/04/18 22:02:27 2AACA000 s can't open file "/var/tuxbox/config/oscam.provid" (err=2 No such file or directory), no provids's loaded
2011/04/18 22:02:27 2AACA000 s can't open file "/var/tuxbox/config/oscam.ird" (errno=2 No such file or directory) irdeto guessing not loaded
2011/04/18 22:02:27 2AACA000 s monitor: initialized (fd=7, port=988)
2011/04/18 22:02:27 2AACA000 s camd33: disabled
2011/04/18 22:02:27 2AACA000 s camd35: disabled
2011/04/18 22:02:27 2AACA000 s cs378x: disabled
2011/04/18 22:02:27 2AACA000 s newcamd: disabled
2011/04/18 22:02:27 2AACA000 s cccam: disabled
2011/04/18 22:02:27 2AACA000 s radegast: disabled
2011/04/18 22:02:27 2AACA000 s http thread started
2011/04/18 22:02:27 2AACA000 s creating thread for device /dev/sci0
2011/04/18 22:02:27 2AACA000 s waiting for local card init
2011/04/18 22:02:27 2BDD7500 h HTTP Server listening on port 8888
2011/04/18 22:02:27 2C5D7500 r reader thread started (thread=2C5D7500, label=satellitebg, device=/dev/sci0, detect=cd, mhz=500, cardmhz=357)
2011/04/18 22:02:27 2C5D7500 r satellitebg card detected
2011/04/18 22:02:28 2C5D7500 r ATR: 3B 34 94 00 30 42 30 30
2011/04/18 22:02:30 2C5D7500 r Maximum frequency for this card is formally 5 Mhz, clocking it to 5.00 Mhz
2011/04/18 22:02:31 2C5D7500 r type: Conax, caid: 0B01, serial: 2033008760, hex serial: 792d4078, card: v64
2011/04/18 22:02:31 2C5D7500 r Providers: 1
2011/04/18 22:02:31 2C5D7500 r Provider: 1  Provider-Id: 000000
2011/04/18 22:02:31 2C5D7500 r Provider: 1  SharedAddress: 00000000
2011/04/18 22:02:31 2C5D7500 r found cardsystem conax
2011/04/18 22:02:31 2C5D7500 r Package: 1, id: 1010, date: 2011/04/11 - 2011/04/16, name: Preview1
2011/04/18 22:02:31 2C5D7500 r [conax-reader] ready for requests
2011/04/18 22:02:32 2AACA000 s init for all local cards done
2011/04/18 22:02:32 2AACA000 s anti cascading disabled
2011/04/18 22:02:32 2CDD7500 c plain dvbapi-client granted (user, au=on (1 reader))
2011/04/18 22:02:32 2CDD7500 c dvbapi: reread priority file oscam.dvbapi
2011/04/18 22:02:32 2CDD7500 c dvbapi: 1 entries read from oscam.dvbapi
2011/04/18 22:02:32 2CDD7500 c dvbapi: [ADD PID 0] CAID: 0D06   ECM_PID: 04FD   PROVID: 000000
2011/04/18 22:02:32 2CDD7500 c dvbapi: [ADD PID 1] CAID: 0B01   ECM_PID: 0520   PROVID: 000000
2011/04/18 22:02:32 2CDD7500 c dvbapi: new program number: 151A (0D06:151A unknown)
2011/04/18 22:02:32 2CDD7500 c user (0B01&000000/151A/67:067B): not found (92 ms) by satellitebg (of 1 avail 1)
2011/04/18 22:02:33 2CDD7500 c dvbapi: try pids again #1
2011/04/18 22:02:33 2CDD7500 c user (0D06&0000C0/151A/B4:E7D4): rejected group (121 ms) (of 0 avail 0) (no matching reader)
2011/04/18 22:02:33 2CDD7500 c user (0B01&000000/151A/67:067B): not found (121 ms) by satellitebg (of 1 avail 1)
2011/04/18 22:02:33 2CDD7500 c dvbapi: try pids again #2
2011/04/18 22:02:33 2CDD7500 c user (0D06&0000C0/151A/B4:E7D4): rejected group (121 ms) (of 0 avail 0) (no matching reader)
2011/04/18 22:02:33 2CDD7500 c user (0B01&000000/151A/67:067B): not found (121 ms) by satellitebg (of 1 avail 1)
2011/04/18 22:02:33 2CDD7500 c dvbapi: try pids again #3
2011/04/18 22:02:33 2CDD7500 c dvbapi: can't decode channel
2011/04/18 22:02:33 2CDD7500 c user (0D06&0000C0/151A/B4:E7D4): rejected group (121 ms) (of 0 avail 0) (no matching reader)


Помощ!

Мерси предварително.

Само да добавя, освен bin-a файловете които имам в /var/tuxbox/config/ са:

oscam.conf
oscam.dvbapi
oscam.server
oscam.services
oscam.srvid
oscam.user

Да не трябва още нещо?

[Bluetooth]

Причината е същата, каквато е дал и @Хиена няколко мнения по-горе - картата не е обновена:

2011/04/18 22:02:31 2C5D7500 r Package: 1, id: 1010, date: 2011/04/11 - 2011/04/16, name: Preview1

[itzko]

Снощи им писах, те казаха че е наред. Днес им се обадих, те след около 30мин. ми звъннаха и казаха че всичко е както трябва. Не би трябвало това да е причината, въпреки че като си знам късмета...

[Bluetooth]

Опитай в oscam.user да смениш реда "au=1" на "au=satellitebg".

[itzko]

Така е ето го:

[account]
user = user
group = 1
uniq = 0
au= satellitebg
monlevel = 4
keepalive = 1

[Хиена]

@itzko ти не беше ли с 800, какво правят конфизите ти в /var ?

Сложи конфизите в /etc/tuxbox/config и рестартирай бокса!