Проблем с разкодиране на канали

[Хиена]

Странно, обажда ли се на сателитите, да не е проблема при тях.
Работи канала, звъни и досаждай.

[Ачо]

На коалата,със вградения рийдър ми иска пин код и работи канала,тъй че проблема не от тях,въпроса е що не мога с дм500 да го подкарам,явно аз бъркам някъде,тази вечер мисля да пробвам и с оскам,но идеята ми беше със NewCS.

[piris]

Здравейте търся някой да ми ъпдейтне карта на сателайтбг
ето и линия 84.22.27.70 8888 User = ALFA Pwd = ALFA

[satco]

Примера е за oscam.x86
При необходимост в слот: sci0
device                        = /dev/scy0

Пробвайте с този [resder] в:

oscam.server

[reader]
label                         = satellitebg
enable                        = 1
protocol                      = mouse
device                        = /dev/ttyS0
pincode                       = 0000
detect                        = cd
mhz                           = 357
cardmhz                       = 357
group                         = 1
emmcache                      = 1,3,2

!!!  Пина си е пин  !!!
pincode                       = 0000

и МНОГО ВАЖНО за ъпдейта е в :

oscam.user

[account]
user                          = user
pwd                           = password
group                         = 1
monlevel                      = 1
au                            = satellitebg
keepalive                     = 0

oscam.conf

[dvbapi]
enabled                       = 1

Дано съм бил полезен ?

[Чък Норис]

[dvbapi]
enabled                       = 1

И за какво ти е това на ПС?

[satco]

Примера е за ПС !
Затова уточнявам да не стават грешки !
При ПС:

[dvbapi]
enabled                       = 0

или се закоментира :

#[dvbapi]
#enabled                       = 0

parameter is optional
 DVB API enabled
Example:
 enabled = 0 # disabled (default) enabled = 1 # enabled

[Бойко1953]

Здравейте,

Взех си втора карта  Conax на Сателит и втори приемник DM800S HD PVR Satellite HD STB, DVB-S2, Sim 2.01, Loader 76, Gemini 5.0'
Картата е активирана и работи много добре на другия ми, по прост приемник Icecrypt S3000HDCCI Satellite HD STB, DVB-S2, USB PVR, CI, Conax.

Проблема ми е, че картата не тръгва на DM800S HD. Оплаках се на продавача и той ми даде някакви инструкции – прати ми  FERRARI-addons-manager_5.0_mipsel.ipk и го инсталирах чрез ТЕЛНЕТ. Чрез него качих CCcam 2.2.1,  CCcam 2.3.1/OScam 1.00, CCcam 2.3.1/New CS1.67. Картата не пак не тръгна
Четох всичко по форумите. Ползвах някакви готови файлове oscam.conf, oscam.server, oscam.user. Сложих ги в папка etc/ tuxbox/ config

Признавам си, че не съм на ти с тази материя. Ако не затруднявам много – някой да ми каже какъв пътя и къде греша. Стъпка по стъпка.
Трябва да оправя този приемник до няколко дена (в рамките на 2 седмици мога да го върна) и ако не тръгне – да го върна и да го сменя с по прост такъв. Започват мачовете и ми писна да се караме с жена ми кой коя телевизия да гледа. За това са ми две карти – да има мир в къщи

Предварително Благодаря на този който ще се заеме с даване на акъл на новобранци, като мен.

Бойко Корцанов

ПП.Как се изкарва тази информация която видях в началото на форума?
Ето лога на oscam-a:
2011/04/13 0:54:04 2AAC6850 s >> OSCam << cardserver started version 1.00-unstable_svn, build #4574 (mips-tuxbox-linux)
2011/04/13 0:54:04 2AAC6850 s version=1.00-unstable_svn, build #4574, system=mips-tuxbox-linux, nice=-1
2011/04/13 0:54:04 2AAC6850 s client max. idle=120 sec, debug level=0
2011/04/13 0:54:04 2AAC6850 s max. logsize=32 Kb
2011/04/13 0:54:04 2AAC6850 s client timeout=5000 ms, fallback timeout=2500 ms, cache delay=120 ms
2011/04/13 0:54:04 2AAC6850 s auth size=4976
2011/04/13 0:54:04 2AAC6850 s services reloaded: 0 services freed, 1 services loaded
2011/04/13 0:54:04 2AAC6850 s userdb reloaded: 1 accounts loaded, 0 expired, 0 disabled
2011/04/13 0:54:04 2AAC6850 s signal handling initialized (type=sysv)
2011/04/13 0:54:04 2AAC6850 s 37 service-id's loaded
2011/04/13 0:54:04 2AAC6850 s can't open file "/var/tuxbox/config/oscam.tiers" (err=2), no tier-id's loaded
2011/04/13 0:54:04 2AAC6850 s can't open file "/var/tuxbox/config/oscam.provid" (err=2), no provids's loaded
2011/04/13 0:54:04 2AAC6850 s can't open file "/var/tuxbox/config/oscam.ird" (errno=2) irdeto guessing not loaded
2011/04/13 0:54:04 2AAC6850 s monitor: initialized (fd=8, port=988)
2011/04/13 0:54:04 2AAC6850 s camd33: disabled
2011/04/13 0:54:04 2AAC6850 s camd35: disabled
2011/04/13 0:54:04 2AAC6850 s cs378x: disabled
2011/04/13 0:54:04 2AAC6850 s newcamd: disabled
2011/04/13 0:54:04 2AAC6850 s cccam: disabled
2011/04/13 0:54:04 2AAC6850 s radegast: disabled
2011/04/13 0:54:04 2AAC6850 s http thread started
2011/04/13 0:54:04 2AAC6850 s creating thread for device /dev/sci0
2011/04/13 0:54:04 2AAC6850 s loadbalancer: can't read from file /tmp/.oscam/stat
2011/04/13 0:54:04 2AAC6850 s waiting for local card init
2011/04/13 0:54:04 2AEFF4B0 h HTTP Server listening on port 8888
2011/04/13 0:54:04 2AFFF4B0 r reader thread started (thread=2AFFF4B0, label=satellitebg, device=/dev/sci0, detect=cd, mhz=500, cardmhz=357)
2011/04/13 0:54:04 2AFFF4B0 r satellitebg card detected
2011/04/13 0:54:05 2AFFF4B0 r ATR: 3B 34 94 00 30 42 30 30
2011/04/13 0:54:07 2AFFF4B0 r Maximum frequency for this card is formally 5 Mhz, clocking it to 5.00 Mhz
2011/04/13 0:54:08 2AFFF4B0 r type: Conax, caid: 0B01, serial: ХХХХХХХХХХ, hex serial: ХХХХХХХ, card: v64
2011/04/13 0:54:08 2AFFF4B0 r Providers: 1
2011/04/13 0:54:08 2AFFF4B0 r Provider: 1 Provider-Id: 000000
2011/04/13 0:54:08 2AFFF4B0 r Provider: 1 SharedAddress: 00000000
2011/04/13 0:54:08 2AFFF4B0 r found cardsystem
2011/04/13 0:54:08 2AFFF4B0 r Package: 1, id: 1010, date: 2011/04/04 - 2011/04/09, name: Preview1
2011/04/13 0:54:08 2AFFF4B0 r [conax-reader] ready for requests
2011/04/13 0:54:08 2AAC6850 s init for all local cards done
2011/04/13 0:54:08 2AAC6850 s anti cascading disabled
2011/04/13 0:54:08 2B0FF4B0 c plain dvbapi-client granted (user, au=satellitebg)
2011/04/13 0:54:08 2B0FF4B0 c dvbapi: reread priority file oscam.dvbapi
2011/04/13 0:54:08 2B0FF4B0 c dvbapi: 2 entries read from oscam.dvbapi
2011/04/13 0:54:12 2B0FF4B0 c dvbapi: [ADD PID 0] CAID: 0D06 ECM_PID: 0513 PROVID: 000000
2011/04/13 0:54:12 2B0FF4B0 c dvbapi: [ADD PID 1] CAID: 0B01 ECM_PID: 0522 PROVID: 000000
2011/04/13 0:54:12 2B0FF4B0 c dvbapi: new program number: 1522 (0D06:1522 unknown)
2011/04/13 0:54:12 2B0FF4B0 c dvbapi: try pids again #1
2011/04/13 0:54:12 2B0FF4B0 c user (0B01&000000/1522/67:1CAC): not found (94 ms) (of 1 avail 1)
2011/04/13 0:54:12 2B0FF4B0 c dvbapi: try pids again #2
2011/04/13 0:54:12 2B0FF4B0 c user (0B01&000000/1522/67:E401): not found (85 ms) (of 1 avail 1)

[тотален]

Здравейте,
Имам проблем с Оскам-а, ако някой може да помогне ще съм много благодарен.

Ето ми конфигурацията:

(oscam.server)


[reader]
label                         = satellitebg
enable               = 1
protocol                      = internal
device                        = /dev/sci0
pincode             = 0000
detect                        = cd
mhz                = 500
cardmhz               = 357
group                         = 1
emmcache                      = 1,3,2

caid = 0B01
ident = 0B01:000000
services = satellitebg
fallback = 0

(oscam.user)

[account]
user            = user
pwd             = password
group           = 1
monlevel        = 1
au              = satellitebg
keepalive       = 0

(oscam.conf)


[global]
Nice = -10
WaitForCards = 1
PreferLocalCards = 1
saveinithistory = 1
logfile                       = /tmp/oscam.log

[monitor]
port = 988
nocrypt = 127.0.0.1,10.0.0.1-10.0.0.50
aulow = 120
hideclient_to = 15
monlevel = 4
appendchaninfo = 0

[webif]
httpport       = 10001
httprefresh    = 5
httpallowed    = 127.0.0.1,192.168.0.0-192.168.255.255

[dvbapi]
enabled        = 1
boxtype = dreambox
au = 1
user           = user
priority = 0B01:000000

Приемникът е ДМ500ХД, имидж iCVS-Image-dm500hd-20110324162215.nfi.

Ето Оскам лога:


-------------------------------------------------------------------------------
>> OSCam <<  cardserver started at Sun Sep  4 20:55:50 2011
-------------------------------------------------------------------------------
2011/09/04 20:55:50 2AAC6810 s >> OSCam <<  cardserver started, version 1.10rc-svn, build #5921 (mips-tuxbox-linux)
2011/09/04 20:55:50 2AAC6810 s version=1.10rc-svn, build #5921, system=mips-tuxbox-linux, nice=-10
2011/09/04 20:55:50 2AAC6810 s client max. idle=120 sec, debug level=0
2011/09/04 20:55:50 2AAC6810 s max. logsize=10 Kb, loghistorysize=4096 bytes
2011/09/04 20:55:50 2AAC6810 s client timeout=5000 ms, fallback timeout=2500 ms, cache delay=0 ms
2011/09/04 20:55:50 2AAC6810 s services reloaded: 0 services freed, 0 services loaded, rejected 0
2011/09/04 20:55:50 2AAC6810 s userdb reloaded: 1 accounts loaded, 0 expired, 0 disabled
2011/09/04 20:55:50 2AAC6810 s signal handling initialized (type=sysv)
2011/09/04 20:55:50 2AAC6810 s 49 service-id's loaded in 1ms
2011/09/04 20:55:50 2AAC6810 s can't open file "/var/tuxbox/config/oscam.tiers" (err=2 No such file or directory), no tier-id's loaded
2011/09/04 20:55:50 2AAC6810 s can't open file "/var/tuxbox/config/oscam.provid" (err=2 No such file or directory), no provids's loaded
2011/09/04 20:55:50 2AAC6810 s can't open file "/var/tuxbox/config/oscam.ird" (errno=2 No such file or directory) irdeto guessing not loaded
2011/09/04 20:55:50 2AAC6810 s monitor: initialized (fd=7, port=988)
2011/09/04 20:55:50 2AAC6810 s camd33: disabled
2011/09/04 20:55:50 2AAC6810 s camd35: disabled
2011/09/04 20:55:50 2AAC6810 s cs378x: disabled
2011/09/04 20:55:50 2AAC6810 s newcamd: disabled
2011/09/04 20:55:50 2AAC6810 s radegast: disabled
2011/09/04 20:55:50 2AAC6810 s http thread started
2011/09/04 20:55:50 2AAC6810 s creating thread for device /dev/sci0
2011/09/04 20:55:50 2AAC6810 s loadbalancer: can't read from file /tmp/.oscam/stat
2011/09/04 20:55:50 2AAC6810 s waiting for local card init
2011/09/04 20:55:50 2C6094B0 r reader thread started (thread=2C6094B0, label=satellitebg, device=/dev/sci0, detect=cd, mhz=500, cardmhz=357)
2011/09/04 20:55:50 2BE094B0 h HTTP Server listening on port 10001
2011/09/04 20:55:50 2C6094B0 r satellitebg card detected
2011/09/04 20:55:51 2C6094B0 r ERROR: 0 characters found in ATR

Пробвах различни конфигурации и имиджи (заводския и openpli-1.0-dm500hd-20100912.nfi), нулев успех. При заводския ми даваше друга грешка, че не може да отвори рийдъра. От лога виждам, че проблемът е в рийдъра, но не намерих нищо в Гугъл, което да ме подсети къде бъркам.

[турбо]

mhz                = 500
cardmhz               = 357

Това го направи така

mhz                = 368
cardmhz               = 368

Поздрави.

[тотален]

Благодаря ти, че писа.
Пробвах, съобщението остава същото:

2011/09/04 21:51:02 2AAC6810 s creating thread for device /dev/sci0
2011/09/04 21:51:02 2AAC6810 s loadbalancer: can't read from file /tmp/.oscam/stat
2011/09/04 21:51:02 2AAC6810 s waiting for local card init
2011/09/04 21:51:02 2BE094B0 h HTTP Server listening on port 10001
2011/09/04 21:51:02 2C6094B0 r reader thread started (thread=2C6094B0, label=satellitebg, device=/dev/sci0, detect=cd, mhz=368, cardmhz=368)
2011/09/04 21:51:02 2C6094B0 r satellitebg card detected
2011/09/04 21:51:04 2C6094B0 r ERROR: 0 characters found in ATR
root@dm500hd:~#

[Георги1]

Провери да няма някой друг кам стартиран, който да заема четеца.
За да провериш напиши ps в конзолата, и ще ти изкара всичко стартирано.

[тотален]

Прегледах процесите, ето лога:

root@dm500hd:~# ps
  PID USER       VSZ STAT COMMAND
    1 root      1724 S    init [3]  
    2 root         0 SW   [migration/0]
    3 root         0 SWN  [ksoftirqd/0]
    4 root         0 SW   [migration/1]
    5 root         0 SWN  [ksoftirqd/1]
    6 root         0 SW<  [events/0]
    7 root         0 SW<  [events/1]
    8 root         0 SW<  [khelper]
    9 root         0 SW<  [kthread]
   10 root         0 SW<  [kblockd/0]
   11 root         0 SW<  [kblockd/1]
   12 root         0 SW<  [khubd]
   13 root         0 SW   [pdflush]
   14 root         0 SW   [pdflush]
   15 root         0 SW<  [kswapd0]
   16 root         0 SW<  [aio/0]
   17 root         0 SW<  [aio/1]
   18 root         0 SW<  [ata/0]
   19 root         0 SW<  [ata/1]
   20 root         0 SW<  [ata_aux]
   21 root         0 SW<  [scsi_eh_0]
   22 root         0 SW<  [scsi_eh_1]
   23 root         0 SW   [mtdblockd]
   24 root         0 SWN  [jffs2_gcd_mtd3]
   70 root      2180 S <  udevd --daemon
  263 root         0 SW   [kcdfsd]
  316 root         0 SW   [b_event]
  317 root         0 SW   [b_idle]
  322 root         0 SW<  [fp]
  337 root         0 SW<  [mpeg]
  345 root         0 SW<  [dmx0]
  352 root         0 SW<  [dmx1]
  359 root         0 SW<  [dmx2]
  361 root         0 SW<  [dmx3]
  362 root         0 SW<  [dmx4]
  363 root         0 SW<  [dmx_hw_sec]
  406 root      1928 S    /usr/bin/wdog tpmd
  407 root      4312 S    tpmd
  440 root      4076 S    nmbd -D
  442 root      6780 S    smbd -D
  460 root      6780 S    smbd -D
  476 root      2520 S    udhcpc -R -b -T3 -A10 -p /var/run/udhcpc.eth0.pid -i
  502 messageb  2408 S    /usr/bin/dbus-daemon --system
  523 root     11856 S    /usr/bin/gdaemon
  529 root     11856 S    /usr/bin/gdaemon
  532 root      2348 S    /usr/sbin/dropbear -r /etc/dropbear/dropbear_rsa_host
  550 root      1832 S    /usr/sbin/inetd
  554 root      2520 S    /sbin/syslogd -n -O /var/log/messages -s 32 -b 1 -m 2
  556 root      2520 S    /sbin/klogd -n
  671 root      2256 S    /usr/sbin/automount --pid-file=/var/run/autofs/_autof
  729 avahi     3084 S    avahi-daemon: running [dm500hd.local]
  739 root      2520 S    /bin/sh /usr/bin/enigma2.sh
  742 root      100m S    /usr/bin/enigma2
  754 root      100m S    /usr/bin/enigma2
  768 root      100m S N  /usr/bin/enigma2
  769 root      100m S N  /usr/bin/enigma2
  773 root      100m S    /usr/bin/enigma2
  783 root      100m S N  /usr/bin/enigma2
  776 root         0 SW<  [kdvb-ad-0-fe-0]
  820 root         0 SW<  [cifsoplockd]
  821 root         0 SW<  [cifsdnotifyd]
  822 root         0 SW   [cifsd]
  909 root      2840 S    telnetd
  910 root      2836 S    -sh
  913 root      2836 R    ps

[Георги1]

Ами не се вижда друг кам, освен да пробваш с друга версия на оскама.

[тотален]

Пробвах няколко версии от http://download.oscam.to/index.php?&direction=0&order=mod&directory=mips-tuxbox.
Дава ми винаги грешка Segmentation fault.
Само със oscam-stable-1.10-mips-tuxbox-webif не дава тази грешка (с него е лога от по-горе).

[тотален]

Проблемът с подкарването на Оскам е решен, картата я бях сложил наобратно...

Каналите не се разкодират и проблемът в момента е следният:

2011/09/05 16:35:52 2AAC6810 s can't open file "/var/tuxbox/config/oscam.tiers" (err=2 No such file or directory), no tier-id's loaded
2011/09/05 16:35:52 2AAC6810 s can't open file "/var/tuxbox/config/oscam.provid" (err=2 No such file or directory), no provids's loaded
2011/09/05 16:35:52 2AAC6810 s can't open file "/var/tuxbox/config/oscam.ird" (errno=2 No such file or directory) irdeto guessing not loaded
2011/09/05 16:35:52 2AAC6810 s monitor: disabled
2011/09/05 16:35:52 2AAC6810 s camd33: disabled
2011/09/05 16:35:52 2AAC6810 s camd35: disabled
2011/09/05 16:35:52 2AAC6810 s cs378x: disabled
2011/09/05 16:35:52 2AAC6810 s newcamd: disabled
2011/09/05 16:35:52 2AAC6810 s radegast: disabled
2011/09/05 16:35:52 2AAC6810 s http thread started
2011/09/05 16:35:52 2AAC6810 s creating thread for device /dev/sci0
2011/09/05 16:35:52 2AAC6810 s loadbalancer: can't read from file /tmp/.oscam/stat
2011/09/05 16:35:52 2AAC6810 s waiting for local card init
2011/09/05 16:35:52 2BE094B0 h HTTP Server listening on port 10001
2011/09/05 16:35:52 2C6094B0 r reader thread started (thread=2C6094B0, label=satellitebg, device=/dev/sci0, detect=cd, mhz=357, cardmhz=357)
2011/09/05 16:35:52 2C6094B0 r satellitebg card detected
2011/09/05 16:35:54 2C6094B0 r ATR: 3B 34 94 00 30 42 30 30
2011/09/05 16:35:56 2C6094B0 r Maximum frequency for this card is formally 5 Mhz, clocking it to 5.00 Mhz
2011/09/05 16:35:57 2C6094B0 r type: Conax, caid: 0B01, serial: 2033007088, hex serial: 792d39f0, card: v64
2011/09/05 16:35:57 2C6094B0 r Providers: 1
2011/09/05 16:35:57 2C6094B0 r Provider: 1 Provider-Id: 000000
2011/09/05 16:35:57 2C6094B0 r Provider: 1 SharedAddress: 00000000
2011/09/05 16:35:57 2C6094B0 r found cardsystem conax
2011/09/05 16:35:57 2C6094B0 r Package: 1, id: 1010, classes: 010FFFFF, date: 2011/08/19 - 2011/08/24, name: Preview1
2011/09/05 16:35:57 2C6094B0 r Package: 2, id: 1010, classes: 010FFFFF, date: 1990/01/01 - 1990/01/01, name: Preview1
2011/09/05 16:35:57 2C6094B0 r [conax-reader] ready for requests
2011/09/05 16:35:57 2AAC6810 s init for all local cards done
2011/09/05 16:35:57 2AAC6810 s anti cascading disabled
2011/09/05 16:35:57 2D6194B0 c plain dvbapi-client granted (dummy, au=on (1 reader))
2011/09/05 16:35:57 2D6194B0 c dvbapi: can't open priority file /var/tuxbox/config/oscam.dvbapi
2011/09/05 16:35:59 2D6194B0 c dvbapi: [ADD PID 0] CAID: 0B01   ECM_PID: 01FA   PROVID: 000000
2011/09/05 16:35:59 2D6194B0 c dvbapi: [ADD PID 1] CAID: 0D06   ECM_PID: 01F9   PROVID: 000000
2011/09/05 16:35:59 2D6194B0 c dvbapi: new program number: 157F (BNT1\)
2011/09/05 16:35:59 2C6094B0 r Error processing ecm for caid 0B01, srvid 157F (servicename: BNT1\) on reader satellitebg.
2011/09/05 16:35:59 2D6194B0 c dummy (0B01&000000/157F/67:7376): not found (99 ms) by satellitebg (of 1 avail 1)
2011/09/05 16:36:00 2D6194B0 c dvbapi: try pids again #1
2011/09/05 16:36:00 2D6194B0 c dummy (0D06&0000C0/157F/B4:B779): rejected group (0 ms) (of 0 avail 0) (no matching reader)
2011/09/05 16:36:00 2D6194B0 c dummy (0B01&000000/157F/67:7376): not found (0 ms) by satellitebg (of 1 avail 1)
2011/09/05 16:36:00 2D6194B0 c dvbapi: try pids again #2
2011/09/05 16:36:00 2D6194B0 c dummy (0D06&0000C0/157F/B4:B779): rejected group (0 ms) (of 0 avail 0) (no matching reader)
2011/09/05 16:36:00 2D6194B0 c dummy (0B01&000000/157F/67:7376): not found (0 ms) by satellitebg (of 1 avail 1)
2011/09/05 16:36:00 2D6194B0 c dvbapi: try pids again #3
2011/09/05 16:36:00 2D6194B0 c dvbapi: can't decode channel
2011/09/05 16:36:00 2D6194B0 c dummy (0D06&0000C0/157F/B4:B779): rejected group (0 ms) (of 0 avail 0) (no matching reader)

В статуса на картата пише CARDOK (no entitlements).

Конфигурацията ми е следната:

Оскам.конф

[global]
Nice = -1
WaitForCards = 1
PreferLocalCards = 1
saveinithistory = 1
logfile                       = /tmp/oscam.log

[webif]
httpport       = 10001
httprefresh    = 5
httpallowed    = 127.0.0.1,192.168.0.0-192.168.255.255

[dvbapi]
enabled        = 1
boxtype =
au = 1
user           = dummy


Оскам.сървър

[reader]
label                         = satellitebg
enable               = 1
protocol                      = internal
device                        = /dev/sci0
pincode                       = 0000
detect                        = cd
group                         = 1
emmcache                      = 1,3,2


Оскам.усер

[account]
user            = dummy
pwd             = dummy
group           = 1
monlevel        = 1
au              = satellitebg