Как да настроя OMNIKEY?

ditev · 02-09-2021, 19:22

Как ще е целия лог нали трябва да има заявка за ecm.
След разчитане на картата.

примерно:

dvbappi (4AEE@000000/0000/0089/4F:0000000000000000000000000): found (105 ms) by omnikey (P/1/2/2)

Да написъл съм Show debug а, то е Show Settings, във Live log най отдолу в Show settings и послед Switch debug на 2.

dzumba · 02-09-2021, 19:25

Абе да си постне юзера и двбапи!

ditev · 02-09-2021, 19:29

Точно така дай съдържанието на файловете oscam.conf и oscam.user от /etc/tuxbox/config/oscam/ като замениш узер и пас с примерни.

oldman · 02-09-2021, 19:33

Цитат на: ditev;564973Как ще е целия лог нали трябва да има заявка за ecm.
След разчитане на картата.

примерно:

Код [Маркирай кода] Разшири
dvbappi (4AEE@000000/0000/0089/4F:0000000000000000000000000): found (105 ms) by omnikey (P/1/2/2)

Да написъл съм Show debug а, то е Show Settings, във Live log най отдолу в Show settings и послед Switch debug на 2.

Това е целият лог:

Код [Маркирай кода]

2021/09/02 19:30:01 00000000 s     (main) Host name      = h7
2021/09/02 19:30:01 00000000 s     (main) Release        = 4.10.12
2021/09/02 19:30:01 00000000 s     (main) Version        = #1 SMP Mon Jul 19 08:02:29 UTC 2021
2021/09/02 19:30:01 00000000 s     (main) Machine        = armv7l
2021/09/02 19:30:01 00000000 s     (main) Stb model      = h7
2021/09/02 19:30:01 00000000 s     (main) Stb boxtype    = h7
2021/09/02 19:30:01 00000000 s     (main) creating pidfile /tmp/.oscam/oscam.pid with pid 9894
2021/09/02 19:30:01 00000000 s      (emu) OSCam-Emu version 798
2021/09/02 19:30:01 00000000 s   (config) userdb reloaded: 3 accounts loaded, 0 expired, 0 disabled
2021/09/02 19:30:01 00000000 s     (main) signal handling initialized
2021/09/02 19:30:01 00000000 s   (config) 10 provid's loaded
2021/09/02 19:30:01 00000000 s   (config) 164 service-id's loaded in 0 ms
2021/09/02 19:30:01 00000000 s      (net) cs378x: initialized (fd=3, port=12005)
2021/09/02 19:30:01 00000000 s      (net) cccam: initialized (fd=4, port=12000)
2021/09/02 19:30:01 00000000 s   (reader) omnikey [pcsc] creating thread for device 0
2021/09/02 19:30:01 00000000 s   (reader) emulator [emu] creating thread for device emulator
2021/09/02 19:30:01 00000000 s     (main) waiting for local card init
2021/09/02 19:30:01 543AFE3C r      (emu) Stream key delayer initialized
2021/09/02 19:30:01 543AFE3C r      (emu) Stream relay server initialized
2021/09/02 19:30:01 543AFE3C r   (reader) emulator [emu] Reader initialized (device=emulator, detect=cd, mhz=357, cardmhz=357)
2021/09/02 19:30:01 00000000        (emu) INFO: FFDecsa parallel mode = 32
2021/09/02 19:30:01 70F84A93 r   (reader) omnikey [pcsc] Reader initialized (device=0, detect=cd, mhz=357, cardmhz=357)
2021/09/02 19:30:01 459E06DE h    (webif) webif: decompressed 166358 bytes back into 408256 bytes
2021/09/02 19:30:01 459E06DE h    (webif) HTTP Server running. ip=0.0.0.0 port=83
2021/09/02 19:30:02 543AFE3C r   (reader) emulator [emu] card detected
2021/09/02 19:30:02 70F84A93 r   (reader) omnikey [pcsc] PCSC was opened with handle: 931866018
2021/09/02 19:30:02 70F84A93 r   (reader) omnikey [pcsc] card detected
2021/09/02 19:30:02 70F84A93 r   (reader) omnikey [pcsc] ATR: 3B 20 00 
2021/09/02 19:30:03 543AFE3C r   (reader) emulator [emu] found card system emu
2021/09/02 19:30:03 543AFE3C r   (reader) emulator [emu] THIS WAS A SUCCESSFUL START ATTEMPT No  1 out of max allotted of 1
2021/09/02 19:30:03 543AFE3C r      (emu) Key file not found in: /etc/tuxbox/config/oscam
2021/09/02 19:30:03 543AFE3C r      (emu) Key file not found in: /var/keys
2021/09/02 19:30:03 543AFE3C r      (emu) Total keys in memory: W:0 V:0 N:0 I:0 F:0 G:0 P:0 T:0 A:0
2021/09/02 19:30:03 70F84A93 r   (reader) omnikey [pcsc] Bulcrypt card detected, checking card version.
2021/09/02 19:30:04 70F84A93 r   (reader) omnikey [pcsc] Bulcrypt v1 card detected.
2021/09/02 19:30:04 70F84A93 r   (reader) omnikey [pcsc] CAID: 0x4AEE|0x5581, CardType: 0x4c, Serial: #############, HexSerial: ###########
2021/09/02 19:30:04 70F84A93 r   (reader) omnikey [pcsc] Ready for requests.
2021/09/02 19:30:04 70F84A93 r   (reader) omnikey [pcsc] found card system bulcrypt
2021/09/02 19:30:04 70F84A93 r   (reader) omnikey [bulcrypt] THIS WAS A SUCCESSFUL START ATTEMPT No  1 out of max allotted of 1
2021/09/02 19:30:04 70F84A93 r   (reader) omnikey [bulcrypt] Reading subscription info.
2021/09/02 19:30:04 70F84A93 r   (reader) omnikey [bulcrypt] Subscription data last update    : 2021-08-24 17:31:42 GMT
2021/09/02 19:30:04 70F84A93 r   (reader) omnikey [bulcrypt] Subscription should be active to : 2021-09-24 17:31:42 GMT
2021/09/02 19:30:04 70F84A93 r   (reader) omnikey [bulcrypt] Subscription data 1 (0x63fe): +++++++-
2021/09/02 19:30:04 70F84A93 r   (reader) omnikey [bulcrypt] Subscription data 2 (0x63fe): +++++++-
2021/09/02 19:30:04 70F84A93 r   (reader) omnikey [bulcrypt] Package 02 is active: 
2021/09/02 19:30:04 70F84A93 r   (reader) omnikey [bulcrypt] Package 04 is active: 
2021/09/02 19:30:04 70F84A93 r   (reader) omnikey [bulcrypt] Package 08 is active: 
2021/09/02 19:30:04 70F84A93 r   (reader) omnikey [bulcrypt] Package 10 is active: 
2021/09/02 19:30:04 70F84A93 r   (reader) omnikey [bulcrypt] Package 20 is active: 
2021/09/02 19:30:04 70F84A93 r   (reader) omnikey [bulcrypt] Package 40 is active: 
2021/09/02 19:30:04 70F84A93 r   (reader) omnikey [bulcrypt] Package 80 is active: 
2021/09/02 19:30:04 70F84A93 r   (reader) omnikey [bulcrypt] End subscription info.
2021/09/02 19:30:37 459E06DE h    (webif) all debug_level=2





 Switch Debug from 2 to   0   1   2   4   8   16   32   64   128   256   512   1024   2048   4096   8192   ALL  

 Switch displayed log lines from 512 to   32   64   128

това ли?

Код [Маркирай кода]

[account]
user                          = dvbapiau
uniq                          = 1
au                            = 1
group                         = 1,2,3,4,5

ditev · 02-09-2021, 19:43

Цитат на: oldman;564960Тръгна, чете картата на була, но не отваря.
Код [Маркирай кода] Разшири
[reader] label = omnikey protocol = pcsc device = 0 autospeed = 0 caid = 5581,4AEE detect = cd ident = 5581:000000;4AEE:000000 emmcache = 1,1,2,0

Май тук не си сложил група.

Код [Маркирай кода]

label                         = omnikey
protocol                      = pcsc
device                        = 0
autospeed                     = 0
caid                          = 5581,4AEE
detect                        = cd
group                         = 1
ident                         = 5581:000000;4AEE:000000
emmcache                      = 1,1,2,0

И съдържанието на oscam.conf.

oldman · 02-09-2021, 19:48

Групата не промени нещата.

Код [Маркирай кода]

[global]
disablelog				= 1
disableuserfile				= 1
usrfileflag				= 0
maxlogsize				= 10
preferlocalcards			= 1
saveinithistory 			= 1
lb_mode					= 0
unlock_parental				= 1
disablecrccws_only_for			= 098C:000000;09C4:000000


[cccam]
port                           = 12000
reshare                        = 0
version                        = 2.3.0


[cs378x]
port                                    = 12005

[webif]
httpport				= 83
httpallowed				= 10.0.0.0-10.255.255.255,172.16.0.0-172.31.255.255,192.168.0.0-192.168.255.255,127.0.0.1

[dvbapi]
enabled					= 1
pmt_mode				= 6
au					= 1
user					= dvbapiau
boxtype					= dreambox

dzumba · 02-09-2021, 19:52

pmt_mode = 0

и ако имаш dvbapi.config го изтрий!

ditev · 02-09-2021, 20:02

И промените ако ги правиш през файловете, не през уеб на оскама, след като запазиш файловете, рестарт на оскам, за да влезнат в сила промените.

oldman · 02-09-2021, 20:04

Тръгна - благодарности на всички, които помогнаха!

dzumba · 02-09-2021, 21:07

След коя процедура тръгна,да е ясно!?

oldman · 02-09-2021, 21:15

Цитат на: dzumba;564983pmt_mode = 0

След тази.

111111 · 02-09-2021, 21:30

Цитат на: oldman;564960Тръгна, чете картата на була, но не отваря.
Код [Маркирай кода] Разшири
[reader] label = omnikey protocol = pcsc device = 0 autospeed = 0 caid = 5581,4AEE detect = cd ident = 5581:000000;4AEE:000000 emmcache = 1,1,2,0

махай го това 5581 не работи от години
Добави група идентична на DVBAPI

разархивирай си го на машината със RAR 7z или каквото ползваш
или в приемника

Код [Маркирай кода]

tar -xvf