Франсетата какво пипат на 19Е ll том?

ТихомирПетков · 03-05-2017, 17:53

В keys е само gbox_cfg
sc01 e:
ATR:3F77180000C2EB45026C9000
Viaccess Card

CaID 0500
Serial (UA) 0000310885120 (001287BB00)
Issuer FFF400

Provider00 FFF400 PPUA 1287BB00 ISSUER
Key 00 01 02 03 09 0A 0B 0C 0F
Geo 0701
Memory 16384/26654/22602 acccess 00

Provider01 030B00 PPUA 1287BB00 TNTSAT
Key 00 01 02 03 08 09 0A 0B 0C 0D 0E 0F
Geo 0701
Memory 16384/26654/22602 acccess 3F
Class
from 20.01.2016 to 19.01.2020 class: 01

Baudrate = 145161 Baud

Ето това е началото на debug файла:
gbox.net 2.2A/Linux@Xileon ( Mar 2 2016, 20:46:00 ) git811.K
mode 03
AU:03/update:01/Keyfile:00 Hash:01 DispECM:01/EMM:01 UDPInit:00 OSD:00
could not open /var/keys/irdeto
could not open /var/keys/seca
could not open /var/keys/via
could not open /var/keys/nagra
could not open /var/keys/conax
could not open /var/keys/crypto
could not open /var/keys/nds
could not open /var/keys/constcw
ignore.list file not found
cwshare cfg file not found
CPU ATI Xileon
using LinuxTV api3
could not open /var/keys/softcam.cfg
internal slot1 opened
Couldn't open /dev/sci1: No such file or directory
mode: any pid
have to init card 1
ATR : 3F 77 18 00 00 C2 EB 45 02 6C 90 00
Reset Baudrate = 9600 Baud
Viaccess Card

CaID 0500
Serial (UA) 0000310885120 (001287BB00)
Issuer FFF400
Provider00 FFF400 PPUA 1287BB00 ISSUER
Provider01 030B00 PPUA 1287BB00 TNTSAT
Working Baudrate = 145161 Baud
card init ok

dzumba · 03-05-2017, 18:32

Има един файл via който трябва да попълниш и да сложиш в кейс ,малко играчка е ,ако не си го правил, имаш ли данните от оскама за тази карта е лесно!Но си мисля,че за ъпдейт не са нужни,само трябва да вървят ЕММ!Не е важно да получиш картина,важно е картата да се актуализира,проверяваш през половин час в sc01 дали се променя нещо!Ако колегата по горе го има via попълнен, нека ти го даде!

ТихомирПетков · 03-05-2017, 19:37

качих и файлът softcam.cfg, в който написах тази секция:
[slot-1]
initialization      = extended
disable_pts      = 0
enable_ice      = 0
alternative_frequency   = 0
alternative_baudrate   = 0
byte_delay      = 0
instruction_delay   = 0
#
enable_unique_emm   = 1
enable_shared_emm   = 1
enable_global_emm   = 1
block_unique_emm   = 0
block_shared_emm   = 0
block_global_emm   = 0
block_user_emm      = 0
save_processed_emm   = 1
save_rejected_emm   = 1

и сега започнаха да се виждат в лога такива редове:
===== Via EMM on CaID 0x0500, pid 0x168C ======
prov: 0FF400, MKey: 03
-EMM-------------------------------------------
8B 70 8D 90 03 FF F4 03 92 08 E6 43 20 0B 3D 2C
EC 30 81 72 B4 97 59 C6 6A 0E 58 65 52 5A 95 02
7D F0 DD 97 68 D9 5F E8 79 11 4A F0 E3 E6 6C 7C
4D 78 4E 08 EE 33 18 3F 57 C4 88 C9 C5 BF FA D5
A6 C4 8F 44 94 22 BD BA 21 49 B9 D9 74 DB 67 D4
30 2A 16 EF CF 90 27 CC 0C 25 2A 8A 73 B9 47 4B
0A 74 94 A3 82 7C 9B 9C D6 65 BF 19 82 CB A0 B8
E4 13 B7 E1 6A 5D AB 02 14 D9 84 CF ED E4 EC 40
B9 E2 2B 9D 2E B1 F0 08 07 67 E3 B0 90 47 F9 56
-Send to card 1 -------------------------------
CA 1C 00 03 88 92 08 E6 43 20 0B 3D 2C EC 30 81
72 B4 97 59 C6 6A 0E 58 65 52 5A 95 02 7D F0 DD
97 68 D9 5F E8 79 11 4A F0 E3 E6 6C 7C 4D 78 4E
08 EE 33 18 3F 57 C4 88 C9 C5 BF FA D5 A6 C4 8F
44 94 22 BD BA 21 49 B9 D9 74 DB 67 D4 30 2A 16
EF CF 90 27 CC 0C 25 2A 8A 73 B9 47 4B 0A 74 94
A3 82 7C 9B 9C D6 65 BF 19 82 CB A0 B8 E4 13 B7
E1 6A 5D AB 02 14 D9 84 CF ED E4 EC 40 B9 E2 2B
9D 2E B1 F0 08 07 67 E3 B0 90 47 F9 56
card 1 response in 241 ms
Card response: 90 40
===============================================

фокус · 03-05-2017, 19:45

Не исках да се намесвам,ама колегата със 100% можеше да постне,я лог,я настройки,да видиме как е сменило геото,защото доста хора опитаха и нищо,засега потвърдено само с оригинален приемник или подходящ модул сменя геото!Лошото е,че моята карта не е при мен и малко по бавно се случват нещата!

П-с,преди да се ъпдейтне картата излиза със старият гео код:0701
След ъпдейт новият гео код е 07CC най вероятно картата в гбокса няма да работи дори и след смяна на геокода,трябва да се върне в оскам!
При стартиране в оскама,трябва лога да изглежда подобно на този лог:
243DC2AA r (reader) TNT_v5 [internal] using ecm #7cc for long viaccess ecm 2017/04/28 17:36:16 243DC2AA r (reader) TNT_v5 [internal] type: Viaccess (non-standard atr), caid: 0500, serial: ######### 2017/04/28 17:36:16 243DC2AA r (reader) TNT_v5 [internal] providers: 2 (FFF400,030B00) 2017/04/28 17:36:16 243DC2AA r (reader) TNT_v5 [internal] Maturity level

= older than 0 years 2017/04/28 17:36:16 243DC2AA r (reader) TNT_v5 [internal] ready for requests 2017/04/28 17:36:16 243DC2AA r (reader) TNT_v5 [internal] found card system viaccess 2017/04/28 17:36:16 243DC2AA r (reader) TNT_v5 [viaccess] THIS WAS A SUCCESSFUL START ATTEMPT No 1 out of max alloted of 1 2017/04/28 17:36:16 243DC2AA r (reader) TNT_v5 [viaccess] card detected 2017/04/28 17:36:16 243DC2AA r (reader) TNT_v5 [viaccess] serial: ######### 2017/04/28 17:36:16 243DC2AA r (reader) TNT_v5 [viaccess] provider: 1, id: ####################, sa: ########, geo: empty 2017/04/28 17:36:16 243DC2AA r (reader) TNT_v5 [viaccess] provider: 2, id: ####################, sa: ########, geo: 03 FF FF 00

dzumba · 03-05-2017, 20:18

То се вижда че е
Provider00 FFF400 PPUA 1287BB00 ISSUER
Key 00 01 02 03 09 0A 0B 0C 0F
Geo 0701
Memory 16384/26654/22602 acccess 00

Ама като постои известно време,около час,може и да се промени,след час да рестартира гбокса,да се рефрешне инфото в темпа!

drago_kz · 04-05-2017, 00:06

за съжаление не погледнах преди ъпдейта как е било , но сега пуснах gbox811 и изплю това :
ATR:3F77180000C2EB45026C9000
Viaccess Card

CaID 0500
Serial (UA) 0000310909292 (001288196C)
Issuer FFF400

Provider00 FFF400 PPUA 1288196C ISSUER
Key 00 01 02 03 09 0A 0B 0C 0F
Geo 07CC
Memory 16384/24770/22602 acccess 00

Provider01 030B00 PPUA 1288196C TNTSAT
Key 00 01 02 03 08 09 0A 0B 0C 0D 0E 0F
Geo 07CC
Memory 16384/24770/22602 acccess 3F
Class
from 12.12.2016 to 11.12.2020 class: 01

Baudrate = 145161 Baud

dzumba · 04-05-2017, 07:04

А ти имаш ли попълнен файл via?

фокус · 04-05-2017, 09:10

В gbox реално работи ли картата или само се ъпва?

ТихомирПетков · 04-05-2017, 09:13

При мен не се получи.
Приемник Ет7000 на TF1.
В лог файла с EMM са записани 980 обработени.

Ето това е съдържанието на gbox.cfg:
# gbox config file

# Trace, Debug
# xx yz ; xx=00 no konsole output
# xx yz ; xx=01 konsole output
# xx yz ; y=0 debug output (dont use)
# xx yz ; y=1 no debug output
# xx yz ; z=0 ouput to konsole
# xx yz ; z=1 output to /var/tmp/debug.txt
# xx yz ; z=2 Output to UDP (to capture with gboxt)
Z: { 01 12 } 192.168.1.2 8024

# gbox working mode
# 00 pure Emu
# 01 pure SoftCam (when card inside), Emu (when no card inside)
# 02 pure Net Client
# 03 Mixed mode !!!!! always use this !!!!!
G: { 01 }

# Display ECM messages on Konsole
# 00 dont show any ECMs
# 01 show only valid ECMs
# 02 show valid and bad ECMs with complete data display
C: { 02 }

# Display EMM messages on Konsole
# 00 dont show any EMMs
# 01 show only valid EMMs
# 02 show valid and bad EMMs with complete data display
# 1* Log any tier change on PW-Nagra-17xx cards into /var/keys/pwupdate.log
M: { 02 }

# Auto Update
# 00 AU disable (default)
# 01 AU enable
# 02 AU auto
# 03 AU enable with ua,sa and ga filter !!!!! always use this !!!!!
A: { 03 }

# Key Update
# 01 update only new keys, default setting
# 02 update all keys (used for valid PMK checking)
U: { 02 }

# Hash pids
# 00 hash all pids, DO NOT USE THIS OPTION, IT IS ONLY FOR TESTING STUFF
# 01 hash only pids with implemented algos and available keys !!!!! always use this
H: { 01 }

# Key files folder
# 00 keyfiles in /var/keys
# 01 keyfiles in /var/tmp
T: { 00 }

# On Screen Display for the Multysystemcam on com1/com2
# 00 No OSD (default)
# 01 display Smartcard messages in Neutrino
# 02 display Smartcard messages in Neutrino new nhttpd format
# 03 display Smartcard messages in Enigma
# 04 display Smartcard messages in Enigma2
O: { 00 } 192.168.0.3 coolstream

# Logger and NET-mode UDP port Init
# 00 do not init UDP port
# 01 Init UDP port for IP, port, UDP
L: { 00 } 192.168.0.251 7025

# demux, multicam/comport configuration
# example: yz = 0x0A = 00001010 (use com2 with inverted CTS detection line)
# *x ** ; x = device nummber to be used (0= default)
# D* ** ; force use of /proc/bus/gtx for cw write operations
(in the dbox2 the gbox writes directly the CWs, 00 is the
recommended mode ! No drivers are required) use D* ** ONLY if
you have Problems. 0* ** should be prefered !!!
# F* ** ; write CWs in both devices (used for PVR in STB04xxx devices)
# ** y* ; y=0001b (0x1*) use slot1 as Multicam (only on STB04xxx)
# ** y* ; y=0010b (0x2*) use slot2 as Multicam (only on STB04xxx)
# ** y* ; y=0011b (0x3*) use slot1 and slot2 as Multicams (only on STB04xxx)
# ** *z ; z=0001b (0x*1) use com1 as Multicam
# ** *z ; z=0010b (0x*2) use com2 as Multicam
# ** *z ; z=0011b (0x*3) use com1 and com2 as Multicams
# ** yz ; yz=00110011b (0x33) use slot1+slot2+com1+com2 as Multicams
# ** *z ; z=0100b (0x*4) invert CTS detection on com1
# ** *z ; z=1000b (0x*

invert CTS detection on com2
V: { 00 10 } #Slot 1
#V: { 00 20 } #Slot 2
#V: { 00 30 } #Slot 1+2
#V: { 00 3F } #Slot 1+2+SC8in1

# RS232 SSSP mode
# x debug messages, 1=on, 0=off
# y com port to use (0=none, 1=com1, 2=com2)
R: { 00 } 9600

# Task type
# 00 ** normal mode gbox mode (no season, use Multicam instead)
# 01 ** Season Emulation in a Irdeto allcam chid 0602 nonZ
# 10 ** Season Emulation in a Irdeto allcam chid 1702 nonZ
# 11 ** Season Emulation in a Irdeto allcam chid 1702 Z
# 12 ** Season Emulation in a Irdeto allcam chid 1722 Z
# 13 ** Season Emulation in a Irdeto allcam chid 1762 Z
# ** *1 Com port to use for season emulatiom (1 or 2)
# ** 0* Use CTS for RST detection
# ** 1* Use DCD for RST detection
# ** ** 9600 = Baudrate to be used (working only on dbox2)
W: { 00 00 } 9600

# =============================================================================
# extra options to override default setting in case you expirience Problems,
# normaly these setings are not required.

# Files, folders, devices
# folder/device comment
#F: { 01 } /var/tmp/pmt.tmp      // pmt file
#F: { 02 } /var/tmp/emm.info      // key update log file
#F: { 03 } /var/tmp/ecm.info      // ecm info file
#F: { 04 } /var/tmp/atack.txt      // atack info file
#F: { 08 } 1            // pmt mode (0 - pmt file mode, 1 - pmt socket mode)
#F: { 11 } /var/keys         // folder for config files
#F: { 12 } /var/tmp         // folder for temporary file
#F: { 13 } /var/tmp         // folder for keyfiles
#F: { 21 } /dev/null         // ca device
#F: { 22 } /dev/null         // dvr device
#F: { 23 } /dev/null         // demux device
#F: { 31 } /dev/null         // second ca device to write cw's (recording)
#F: { 41 } /dev/sci0         // STB04xxx slot1
#F: { 42 } /dev/sci1         // STB04xxx slot1
#F: { 43 } /dev/tts/0         // rs232 com1
#F: { 44 } /dev/tts/1         // rs232 com2
#F: { 43 } /dev/ttyUSB0 // rs232 com1# fьr externen Cardreader an com1 SC8in1 oder MCR 4/8 oder Smargo
#F: { 44 } /dev/ttyUSB1 // rs232 com2# fьr externen Cardreader an com2 SC8in1 oder MCR 4/8 oder Smargo

# For overclocking freaks, Clocking internal STB04xxx slots with:
# 1=7.80MHz 2=6.30MHz 3=5.25MHz 4=4.50MHz 5=3.94MHz 6=3.50MHz 7=3.15MHz
# Irdeto works fine on 7.8MHz, all other fine on 6.30MHz or 5.25MHz
# The Dream has not a clean clock signal, some cards that are sensitive will
# refuse to work even on 3.5MHz, thats why 3.15MHz is the default value there.
# On other STB04xxx recievers the same cards work with 6.30MHz
# Ist nicht Aktiv geschaltet ,also keine Funktion
#F: { 51 } 02 // irdeto
#F: { 52 } 03 // seca
#F: { 53 } 03 // viaccess
#F: { 54 } 03 // nagra
#F: { 55 } 03 // crypto
#F: { 57 } 03 // conax
#F: { 58 } 03 // nds

# force a name change of the season or sssp rs232 device
#F: { 45 } /dev/ttyS1

# set stay alive ping time in seconds (default is 300)
#F: { A0 } 300

# disable direct serial port I/O access on 80x86cpus (win and linux)
# direct port i/o is used to set unusual Baudrates, if you want to
# a 3.579MHz card in a 6.000MHz reader etc ...
#
# Enabled (A1=0) is the default setting, has always been !!!
#
# Disable (set to 1) it ONLY if you have problems with ioperm or you want
# to use a usb-to-rs232 smartcard reader
F: { A1 } 1

# descrambler selection by camd.socket private descriptor (0 - index mode, 1 - mask mode), mask mode is default
#F: { AA } 1

и на softcam.cfg:
[generic]
reset_rs232_buffer   = 1

[slot-1] # Exklusiv fьr V13/14 Karten
initialization      = extended
disable_pts      = 0
enable_ice      = 0 # ORF Karte 0=cryptoworks/Mode 1=irdeto/Mode
alternative_frequency   = 0
alternative_baudrate   = 0
byte_delay      = 0
instruction_delay   = 0
#
enable_unique_emm   = 1
enable_shared_emm   = 1
enable_global_emm   = 1
block_unique_emm   = 0
block_shared_emm   = 0
block_global_emm   = 0
block_user_emm      = 0
save_processed_emm   = 1
save_rejected_emm   = 1

[slot-2] # Karten die nicht geblock werden brauchen
initialization      = extended
disable_pts      = 0
enable_ice      = 0 # # ORF Karte 0=cryptoworks/Mode 1=irdeto/Mode
alternative_frequency   = 0
alternative_baudrate   = 0
#
enable_unique_emm   = 1
enable_shared_emm   = 1
enable_global_emm   = 1
block_unique_emm   = 0
block_shared_emm   = 0
block_global_emm   = 0
block_user_emm      = 0
save_processed_emm   = 0
save_rejected_emm   = 0

drago_kz · 04-05-2017, 14:07

Тихомире , при мен се получи с тези файлове , без нищо да съм променял по тях . Както съм ги дръпнал от адонса на OpenATV 5.3 от приемника (DM800SE).

config :

### scam host
/net/ecm_server/foobar/port=4321
/net/ecm_server/foobar/pass=passwort

### scam client
/net/ecm_client/foobar/host=192.168.1.106
/net/ecm_client/foobar/port=62000
/net/ecm_client/foobar/pass=passwort

### newcamd connect
#/net/newcamd/foo/host=192.168.0.xxx
#/net/newcamd/foo/port=1234
#/net/newcamd/foo/user=username
#/net/newcamd/foo/pass=password
#/net/newcamd/foo/key=1234567890123456789012345678

### serial port smartcard readers (3.51a)
# device node
#/sc/serial//device=
#<>e.g.: /dev/ttyUSB0
# type
#/sc/serial//type=><><><><>[default: phoenix]
#<>valid types: mastercrd2, phoenix, smartreader+
# clock frequency in Hz
#/sc/serial//fs=<><><><><>[default: 3571200]
# example
#/sc/serial/usb0/device=/dev/ttyUSB0
#/sc/serial/usb0/type=smartreader+

### cccam share (3.52)
#/net/cccam/home/user=username
#/net/cccam/home/pass=password
#/net/cccam/home/host=192.168.0.xxx
#/net/cccam/home/serv=12000

/sc/serial/usb0/device=/dev/usb/tts/0
/sc/serial/usb0/type=smartreader+

gbox_cfg :

# gbox config file

# Trace, Debug
# xx yz ; xx=00 no konsole output
# xx yz ; xx=01 konsole output
# xx yz ; y=0 debug output (dont use)
# xx yz ; y=1 no debug output
# xx yz ; z=0 ouput to konsole
# xx yz ; z=1 output to /var/tmp/debug.txt
# xx yz ; z=2 Output to UDP (to capture with gboxt)
Z: { 01 11 } 192.168.1.2 8024

# gbox working mode
# 00 pure Emu
# 01 pure SoftCam (when card inside), Emu (when no card inside)
# 02 pure Net Client
# 03 Mixed mode !!!!! always use this !!!!!
G: { 03 }

# Display ECM messages on Konsole
# 00 dont show any ECMs
# 01 show only valid ECMs
# 02 show valid and bad ECMs with complete data display
# 1x show ca access , display: set ca%d index=%d (pid %X) typ=%d
# 2x Map Nagra Aladin to Betacrypt , use nagra aladin 1801 in betacrypt mode (for UM-I02)
C: { 01 }

# Display EMM messages on Konsole
# 00 dont show any EMMs
# 01 show only valid EMMs
# 02 show valid and bad EMMs with complete data display
# 1* Log any tier change on PW-Nagra-17xx cards into /var/keys/pwupdate.log
M: { 11 }

# Auto Update
# 00 AU disable (default)
# 01 AU enable
# 02 AU auto
# 03 AU enable with ua,sa and ga filter !!!!! always use this !!!!!
A: { 03 }

# Key Update
# 01 update only new keys, default setting
# 02 update all keys (used for valid PMK checking)
U: { 01 }

# Hash pids
# 00 hash all pids, DO NOT USE THIS OPTION, IT IS ONLY FOR TESTING STUFF
# 01 hash only pids with implemented algos and available keys !!!!! always use this
H: { 01 }

# Key files folder
# 00 keyfiles in /var/keys
# 01 keyfiles in /var/tmp
T: { 00 }

# On Screen Display for the Multysystemcam on com1/com2
# 00 No OSD (default)
# 01 display Smartcard messages in Neutrino
# 02 display Smartcard messages in Neutrino new nhttpd format
# 03 display Smartcard messages in Enigma
# 04 display Smartcard messages in Enigma2
O: { 00 } 192.168.0.3

# Logger and NET-mode UDP port Init
# 00 do not init UDP port
# 01 Init UDP port for IP, port, UDP
L: { 00 } 192.168.0.251 7025

# demux, multicam/comport configuration
# example: yz = 0x0A = 00001010 (use com2 with inverted CTS detection line)
# *x ** ; x = device nummber to be used (0= default)
# D* ** ; force use of /proc/bus/gtx for cw write operations (in the dbox2 the gbox writes directly the CWs, 00 is the recommended mode ! No drivers are required) use D* ** ONLY if you have Problems. 0* ** should be prefered !!!
# F* ** ; write CWs in both devices (used for PVR in STB04xxx devices)
# ** y* ; y=0001b (0x1*) use slot1 as Multicam (only on STB04xxx)
# ** y* ; y=0010b (0x2*) use slot2 as Multicam (only on STB04xxx)
# ** y* ; y=0011b (0x3*) use slot1 and slot2 as Multicams (only on STB04xxx)
# ** *z ; z=0001b (0x*1) use com1 as Multicam
# ** *z ; z=0010b (0x*2) use com2 as Multicam
# ** *z ; z=0011b (0x*3) use com1 and com2 as Multicams
# ** yz ; yz=00110011b (0x33) use slot1+slot2+com1+com2 as Multicams
# ** *z ; z=0100b (0x*4) invert CTS detection on com1
# ** *z ; z=1000b (0x*

invert CTS detection on com2
# V: {00 31} the 2 internal reader + an external reader SC8in1, MCR and 4in1 8in1 addressed
# V: {00 35} the 2 internal reader + an 1 external reader such Smargo, Easy Mouse, Multiprog, Multi Mouse inverted addressed
# V: {00 3F} the 2 internal reader + an USB HUB + 2 Smargos addressed
V: { 00 30 }

# RS232 SSSP mode
# x debug messages, 1=on, 0=off
# y com port to use (0=none, 1=com1, 2=com2)
# R: { 00 }

# Task type
# 00 ** normal mode gbox mode (no season, use Multicam instead)
# 01 ** Season Emulation in a Irdeto allcam chid 0602 nonZ
# 10 ** Season Emulation in a Irdeto allcam chid 1702 nonZ
# 11 ** Season Emulation in a Irdeto allcam chid 1702 Z
# 12 ** Season Emulation in a Irdeto allcam chid 1722 Z
# 13 ** Season Emulation in a Irdeto allcam chid 1762 Z
# ** *1 Com port to use for season emulatiom (1 or 2)
# ** 0* Use CTS for RST detection
# ** 1* Use DCD for RST detection
# ** ** 9600 = Baudrate to be used (working only on dbox2)
# W: { 00 00 } 9600

# =============================================================================
# extra options to override default setting in case you expirience Problems,
# normaly these setings are not required.

# Files, folders, devices
# folder/device comment
# F: { 01 } /var/tmp/pmt.tmp // pmt file
# F: { 02 } /var/tmp/emm.info // key update log file
# F: { 03 } /var/tmp/ecm.info // ecm info file
# F: { 04 } /var/tmp/atack.txt // atack info file
# F: { 08 } 1 // pmt mode (0 - pmt file mode, 1 - pmt socket mode)
# F: { 11 } /var/keys // folder for config files
# F: { 12 } /var/tmp // folder for temporary file
# F: { 13 } /var/tmp // folder for keyfiles
# F: { 21 } /dev/null // ca device
# F: { 22 } /dev/null // dvr device
# F: { 23 } /dev/null // demux device
# F: { 31 } /dev/null // second ca device to write cw's (recording)
# F: { 41 } /dev/sci0 // STB04xxx slot1
# F: { 42 } /dev/sci1 // STB04xxx slot1
# F: { 43 } /dev/tts/0 // rs232 com1 /dev/ttyUSB0
# F: { 44 } /dev/tts/1 // rs232 com2 /dev/ttyUSB1

# For overclocking freaks, Clocking internal STB04xxx slots with:
# 1=7.80MHz 2=6.30MHz 3=5.25MHz 4=4.50MHz 5=3.94MHz 6=3.50MHz 7=3.15MHz
# Irdeto works fine on 7.8MHz, all other fine on 6.30MHz or 5.25MHz
# The Dream has not a clean clock signal, some cards that are sensitive will
# refuse to work even on 3.5MHz, thats why 3.15MHz is the default value there.
# On other STB04xxx recievers the same cards work with 6.30MHz
# F: { 51 } 02 // irdeto
# F: { 52 } 03 // seca
# F: { 53 } 03 // viaccess
# F: { 54 } 03 // nagra
# F: { 55 } 03 // crypto
# F: { 57 } 03 // conax
# F: { 58 } 03 // nds

# force a name change of the season or sssp rs232 device
# F: { 45 } /dev/ttyS1

# set stay alive ping time in seconds (default is 300)
# F: { A0 } 300

# disable direct serial port I/O access on 80x86cpus (win and linux)
# direct port i/o is used to set unusual Baudrates, if you want to
# a 3.579MHz card in a 6.000MHz reader etc ...
#
# Enabled (A1=0) is the default setting, has always been !!!
#
# Disable (set to 1) it ONLY if you have problems with ioperm or you want
# to use a usb-to-rs232 smartcard reader
# F: { A1 } 1

# GboxTwin mode (only for old gbox, in gbox.net disabled)
# this options for the 2nd gbox ONLY
# you must have an extra gbox, gbox_cfg and cwshare.cfg running on /tmp,
# all other files can linked to the org. files
# F: { A6 } 5

# Server Mode
# 0 disable
# 1 enable
# F: { A4 } 1

# descrambler selection by camd.socket private descriptor (0 - index mode, 1 - mask mode), mask mode is default
# F: { AA } 1

# Debug card access output
# 0 disable (default)
# 1 simple CA trace
# 2 extended CA trace (with timing)
# F: { CA } 2

softcam.cfg :

# SoftCam EMM Log configuration
#
# Save EMM data
# 00 Don't save anything (default)
# 01 Save processed EMMs (/var/tmp/emmproc.bin)
# 02 Save rejected EMMs (/var/tmp/emmblock.bin)
# 03 Save both EMMs
L: { 00 }

# Check additional OSC Frequency !!! ONLY FOR DBOX2 !!!
# 00 No Check (default)
# >0 Check on, Value in KHz , example 8MHz=08000
# F: { 0000 }

# Check additional Baurate for ATR !!! ONLY FOR DBOX2 !!!
# 00 No Check (default)
# >0 Check on, Value in bit/s, example 81861
# B: { 0000 }

# Enable TPScrypt Support
# *0 TPScrypt off
# *1 TPScrypt on (default)
# 1* don't use PTS on Viaccess cards
# 2* don't use PTS on Cryptoworks cards
# 3* don't use PTS on Viaccess and Cryptoworks cards
# 4* switch IRD to ICE mode and ICE to IRD mode
Y: { 00 }

# Empty RS232 buffer before writing
# 00 No reset
# 01 Reset Buffer (default)
E: { 01 }

# SoftCam Blocker/Filter definition
#
# 00 = Allow EMM (default for all)
# 01 = Block EMM addressed to:
# all card
# | shared address/provider
# | | unique address/hex_serial
# ----------------------------------
I: { 00 00 00 } Irdeto All SA UA
S: { 00 00 00 } Seca - SA UA
V: { 00 00 00 } Via - SA UA
N: { 00 00 00 } Nagra All SA UA
C: { 00 00 00 } Crypto All SA UA
O: { 00 00 00 } Conax - SA UA
D: { 00 00 00 } NDS All SA UA

# Timeout Definitions AND com1/com2 delays, all delays to be entered in decimal !
#T: { 00 02 02 } ATR timeout (normal*X), instruction timeout (normal*X)
T: { 00 02 01 } ATR timeout (normal*X), instruction timeout (normal*X)

# com1/com2 delays, all delays to be entered in decimal !
#
# Do NOT touch !!!!!!!!!!!!!!!!!!
# all timings should be 0, change only if you have problems.
T: { 01 00000 000 } Irdeto : byte delay (1e-6 s), instruction delay (1e-3 s)
T: { 02 00000 000 } Seca
T: { 03 00000 000 } Viaccess
T: { 04 00000 000 } Nagra
# T: { 04 00002 000 } Nagra
T: { 05 00000 000 } CryptoWorks
T: { 06 00000 000 } Geldkarte
T: { 07 00000 000 } Conax
T: { 08 00000 000 } NDS
# T: { 09 00000 000 } Dreamcrypt/Firecrypt

# Use Crypto card bug to decode any CW, no matter of chid
#
# Cxxx configuration (is aktiv for the provider only if a config line is present)
# (ECM sample to be used to get the cw's with Cxxx)
#
# Provider provider chid - that is present on the card for that provider
# || || || ||
# Digiturk
# 8: { C1 } A4 4C 00 00 31 28 00 2E 83 01 C1 8C 03 89 19 19 8E 02 00 00 8F 01 A9 91 01 55 DB 10 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 DF 08 00 00 00 00 00 00 00 00

# Use constant CW's for
# caid pid CW0 ... CW1 ...
# 0: { 26 00 10 44 { AA AA BB 0F BB CC CC 53 AA AA BB 0F BB CC CC 53 }} #BBC ONE (27W)
# 0: { 26 00 00 03 { 15 9A CD 7C EB F6 14 F5 15 9A CD 7C EB F6 14 F5 }} #MGM ME (10E)
# 0: { 26 00 1a f6 { 12 34 56 9C 78 9A BC CE 12 34 56 9C 78 9A BC CE }}

via :

####################################################################
# [CAS] Viaccess Boxkey/Camkey
# UA - card unique address (5 byte)
# AX - D2 nano (B1,B2,D1,D2)
# EX - aeskey (16 byte)
#
# set surencryption aes key
# C: { UA UA UA UA UA AX { E0 E1 E2 E3 E4 E5 E6 E7 E8 E9 EA EB EC ED EE EF }}
#
####################################################################
# [EMU] Viaccess1/2 ECM keyset
#
# Provider PPUA---------> Nr. Key------------------->
# ----------------------------------------------------------
# 12 34 5x provider
# 12 34 56 Shared address
# 12 34 56 78 90 unique address
# 12 Key nr.
#
# Viaccess1
#
M: { 00 74 00 00 00 00 0B 00 01 { 95 51 E5 FF 89 15 37 82 }}
M: { 00 74 00 00 00 00 05 00 01 { 6A D3 76 F0 3C F3 EC 82 }}
M: { 00 74 00 00 00 00 38 00 01 { 42 15 AD 41 4A 4E 5D 82 }}
M: { 00 74 00 00 00 00 67 00 01 { F3 8D E7 DE 5A 4A C7 82 }}
M: { 00 78 00 00 00 01 3A 00 01 { D0 17 EE A9 E6 B9 43 3A }}
M: { 00 78 00 00 00 07 55 00 01 { 3D 88 B2 50 69 31 97 3A }}
M: { 00 78 00 00 00 04 F3 00 01 { 74 50 FE 4E 65 A2 F9 3A }}
#
# Provider Nr. Key------------------->
# ------------------------------------------
V: { 00 74 00 08 { 2F B6 02 39 D4 D8 C4 D6 }}
V: { 00 78 00 08 { 5B 14 1E 38 9C 46 24 5F }}
#
# TPS crypt aes keys
# T: { 00 7C 00 { A4 96 16 87 B6 9F EF 5A F4 8F C4 F9 6B 2E 00 71 }}
#
# Viaccess2
#
# set keyset
# Provider-> DES---------------------> XOR---------------------> Perm--------------------> Chain-----------------------> Transformtable
# Ant-1/Le bouquet de Canal+
W: { 02 11 10 { 89 CB B5 4E EB 94 E3 50 { 12 BF 4D 2F 2A 10 F5 90 { 07 04 02 03 05 00 06 01 { E9 6B 9F D4 4D 3D 33 5E }}}}}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
# TNT Sat France
W: { 03 0B 00 { 89 CB B5 4E EB 94 E3 50 { 8B 29 08 AE 39 B0 10 1A { 07 04 02 03 05 00 06 01 { FC 3C 5F 15 D7 A0 B4 37 }}}}}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
#
# set service key
W: { 02 11 10 08 { 35 F6 B9 21 7C 2B A8 3F 38 C3 C1 FD 23 A5 D3 21 }} #DES3 key
#
# W: { 03 0B 00 E1 { A7 9A C0 DB EC 9C 92 51 D1 91 5F 05 88 62 AF 26 }} SD AES Key
# W: { 03 0B 00 E2 { 43 97 26 EB B6 A9 39 A4 56 C0 5F F6 AA 60 6C 43 }} HD AES Key
W: { 03 0B 00 F1 { A7 9A C0 DB EC 9C 92 51 D1 91 5F 05 88 62 AF 26 }} #SD AES Key
W: { 03 0B 00 F2 { EF 3C B8 D3 6A 86 20 97 A3 3F C4 71 01 04 1B E3 }} #HD SurEncryption AES Key
W: { 03 0B 00 D1 { A7 9A C0 DB EC 9C 92 51 D1 91 5F 05 88 62 AF 26 }} #SD AES Key
W: { 03 0B 00 D2 { EF 3C B8 D3 6A 86 20 97 A3 3F C4 71 01 04 1B E3 }} #HD SurEncryption AES Key
W: { 03 0B 00 B1 { A7 9A C0 DB EC 9C 92 51 D1 91 5F 05 88 62 AF 26 }} #SD AES Key
W: { 03 0B 00 B2 { EF 3C B8 D3 6A 86 20 97 A3 3F C4 71 01 04 1B E3 }} #HD SurEncryption AES Key
W: { 03 0B 00 11 { 43 68 1C C7 E4 6C 9D 9D 4F 74 91 20 4D A8 8B 4F }} #AES D2
W: { 03 0B 00 08 { D9 2A 82 E3 11 1C 9A FD ED 46 26 AD 0B 54 2E 5B }} #TNT Sat 3DES Key08
W: { 03 0B 00 09 { CC 72 AA FE 52 65 D6 D0 46 08 E8 32 CE B9 EC 4D }} #TNT Sat 3DES Key09
W: { 03 0B 00 0A { A8 D7 C9 45 06 D7 B7 7F DB 0B 16 BB 4D B6 59 5F }} #TNT Sat 3DES Key0A
W: { 03 0B 00 0B { 7C 6A 24 28 C0 20 02 3B 16 3E 4F E0 24 FF 5D 9D }} #TNT Sat 3DES Key0B

ТихомирПетков · 05-05-2017, 10:01

Все още не се променя при мен геото.
Повечето от обработените ЕММ имат отговор като този:
===== Via EMM on CaID 0x0500, pid 0x168C ======
prov: FFF40, MKey: 01, SA: 12 87 BB
card 1 response in 181 ms
Card response: 90 00
===============================================
но има и такива с
Card response: 99 00

Може ли някой да ми каже гео кода от кой вид emm идва? Мисля да блокирам останалите и да видя дали ще се промени нещо.
enable_unique_emm   = 1
enable_shared_emm   = 1
enable_global_emm   = 1
block_unique_emm   = 0
block_shared_emm   = 0
block_global_emm   = 0
block_user_emm   = 0
save_processed_emm   = 1
save_rejected_emm   = 1

dzumba · 05-05-2017, 10:10

Нищо не блокирай,остави всичко да минава!

ТихомирПетков · 05-05-2017, 16:05

до тук нищо - картата приема и трите вида ЕММ, като само на най-късите отговаря 90 00, на останалите 99 00. Но не се сменя geo кода.

drago_kz · 05-05-2017, 22:32

дай накакъв меил да ти дам бин на gdox може да е от него .

dzumba · 06-05-2017, 13:20

Гбокса е същия,от 23.03.2016,освен ,ако има и непублик!

Новини:

Чат

Франсетата какво пипат на 19Е ll том?

ТихомирПетков

dzumba

ТихомирПетков

фокус

dzumba

drago_kz

dzumba

фокус

ТихомирПетков

drago_kz

ТихомирПетков

dzumba

ТихомирПетков

drago_kz

dzumba