Оригинални имиджи за ДМ 8***/500 Енигма2

[VictorB]

Някой може ли да потвърди че нямa проблеми с последния ъпдейт?
Аз съм с оригинален 500HD и освен ццкам и един NAS mount не съм го пипал повече, но за разлика от предишната версия ми забива през няколко часа или като някой почне да снове с дистанционото по каналите.

[Sharp987]

iCVS Image vom 06.09.2011

VOR INSTALLATION DIESES IMAGES BITTE ZUERST DEN BOOTLOADER AUF #84 DURCH ONLINEUPDATE AKTUALISIEREN UND NEU STARTEN!!!
Oder man macht kein Onlineupdate und flasht das neue Image direkt mit der neuen Version 1.3.3.8 von DreamUp siehe Updates / Images von Heute 5.9.2011

Versions Details:
Enigma2 vom 06.07.2011
Plugins vom 06.09.2011
Skins vom 06.09.2011
Treiber vom 02.09.2011 (DM500hd, DM800, DM800se, DM8000)
Treiber vom 06.05.2011 (DM7025)
Secondstageloader 84 (DM500hd, DM800, DM800se, DM8000)
Secondstageloader 83 (DM7025)

Experimental / eigener Image Update - Feed


Extras bzw. im Image enthaltene ▒▒▒196;nderungen:
- Gemini Plugin ready (GeminiWizard im Image enthalten)
- on/off Prozentanzeige (Anzeige der Sendezeit in Prozente, w▒▒▒228;hlbar ▒▒▒252;ber Menu->Anpassen)
- die Settings Anpassen f▒▒▒252;r Expert, hdd ... (Voreinstellungen in Menu->Anpassen)
- Infoabstand (Abstand der info im Sender▒▒▒252;bersicht, w▒▒▒228;hlbar ▒▒▒252;ber Menu->Anpassen)
- Exif Bild (Soll ein Bild das um 90° verdreht ist gedreht werden, w▒▒▒228;hlbar ▒▒▒252;ber Menu->Anpassen)
- dccamd aus dem Image entfernt
- Samba Server aus dem Image entfernt
- Eigene iCVS Bootlogo's by yvessun
- Smargo USB Cardreader Unterst▒▒▒252;tzung FTDI_SIO und PL2303
- CrossEPG Release 242
- Spinner Fix (Bootbild)
- Startlautst▒▒▒228;rke auf 30% herabgesetzt.
- Expert Ansicht Standard
- HelpMenuList angepasste Anzeige
- GraphMultiEPG incl. Picons
- GraphMultiEPG in Farbe
- PluginList angepasste Anzeige
- iCVS Keymapxml angepasst
- Pictureplayer angepasste Anzeige
- ServiceInfo angepasste Anzeige
- MovieList angepasste Anzeige
- ClockToText angepasste Anzeige
- Tausch der Anzeige bei Jugendpin im Startmenu (JA / NEIN)
- MHW EPG aktiviert
- Fit f▒▒▒252;r das Karatelight von @ mamba0815 und LowFAT von @ gutemine
- DVD Burn ist aus dem Image der 8k genommen worden, kann/sollte aber ▒▒▒252;ber Feed installiert werden
- rt2570 und rt3070 WLAN Treiber
- IPv6 und CPU FREQ Kernelanpassungen
- myChannelSelection von @ adenin
- retune_fix von @ adenin
- listbox_fix von @ adenin
- on/off Bouquet + Button (direkter Zugriff auf das Boupuet ▒▒▒252;ber +, w▒▒▒228;hlbar ▒▒▒252;ber Menu->Anpassen)

Weitere Informationen:
Es werden keine CAMs, CAM Configs, Settings usw. ▒▒▒252;ber den Feed angeboten.
Dieses Image kann als Grundlage f▒▒▒252;r das Gemini Plugin verwendet werden.

Nichts desto trotz kann Userscript oder vergleichbares installiert werden, sofern ihr das Gemini Plugin nicht nutzten m▒▒▒246;chtet.

[Sharp987]

Излезе и имидж iCVS за новият приемник DM7020HD

iCVS-Image-dm7020HD from 17.10.2011

Version details:
Enigma2 from  17.10.2011
Plugins from 17.10.2011
Skins from 17.10.2011
Treiber from 28.09.2011 (DM7020HD)
Treiber from 02.09.2011 (DM500hd, DM800, DM800se, DM8000)
Treiber from 06.05.2011 (DM7025)
Secondstageloader 84 (DM500hd, DM800, DM800se, DM8000, 7020HD)
Secondstageloader 83 (DM7025)

Experimental / own update feed


Extras / included changes:
- Gemini plugin reade (GeminiWizard already included)
- switch ON/OFF EPG-Progress in %, adjoustable in the customization menu
- Set space between channelname and EPG info, adjoustable in the customization menu
- Picture-rotation if exif tag available, adjoustable in the customization menu
- dcccamd removed from the image
- sambaserver removed from the image
- own iCVS bootlogos by yvessun
- Support for Smargo usb Cardreader FTDI_SIO and PL203
- CrossEPG Release 179
- Spinner fix (bootlogo)
- Startvolume set down to 30%
- Expert mode as standard in the customization menu
- Adapted view in screen HelpMenuList
- GraphMultiEPG incl. Picons
- GraphMultiEPG colored
- Adapted view in screen PluginList
- iCVS adapted Keymapxml
- Adapted view in screen Pictureplayer
- Adapted view in screen Serviceinfo
- Adapted view in screen Movielist
- Adapted view in screen ClockToText
- Change of Yes/No in the startwizard at the child safety pin question
- MHW EPG activated
- Ready for Karatelight from @mamba0815 and LowFat from @gutemine
- DVD Burn removed from 8K image, can/should be installed over the feed.
- rt2570 and rt3070 WLAN
- IPv6 and CPU FREQ Kerneladaptions
- myChannelSelection by @adenin
- listbox_fix by @adenin
- on/off bouquet + button (direct access to the bouquet with +, selectable in menu -> customize

no Initramfs Kernel in this image


Further Informations:
There are no Cams, Cam Configs, Settings,... availabe on the feed.
This image can be used as a base for the Gemini plugin.

Although can be installed userscript, if you don't want to use the Gemini plugin.

[Sharp987]

DM800 RELEASE 3.2.0

   
Description:
Enigma2: Release 3.2
Machine: Dreambox dm800
Date: 20110929
Issuer: Dream Multimedia
Link: http://sources.dreamboxupdate.com/opendreambox/1.6/dm800/images
MD5: e98ec6e1a7e84b47313c0e79785f7e5b
Description:
-------------------------------
CHANGELOG DM800 RELEASE 3.2.0
-------------------------------
------------------------------------------
enigma2 (20101216 rel31 -> 20110929 rel32)
------------------------------------------
added basic support for remote TS services in bouquets (rdp, udp, http, iptv)
added blindscan support for BCM4505, BCM4506 and ALPS BSBE1 C-/D01A DVB-S(2) Tuners
extended EPG cache from 14 to 28 days
display unscrambled services in a new FTA service group
added persian translation
put USB harddisks into stand-by
record timers may now be stopped using the record button
virtual keyboard: support Czech and Slovak layout. layouts can be switched using the yellow button
deletion of files could cause corrupted recordings
SoftwareManager: support installation of Wireless LAN drivers
audio selection dialogue: number buttons may now be used to switch audio tracks
NetworkSetup: more consistent configuration of hidden wireless networks
improved handling of standby, shutdown and DiSEqC input selection when using a rotor
added possibility to use hidden bouquet selection in multi epg(s)
switched "subtitles" and "audio tracks" button description in AudioSelection dialog
record timers: fixed invalid conflicts on creation of new timers, when using the DVB-C/T tuner module
some EPG characters were displayed incorrectly
fixed rotor problems with unicable LNB
fixed broken spinners on e2 startup with HD skin
fixed detection of incorrectly marked AC3 audio tracks (ATSC)
fixed rare crash at event info dialogue

-----
other
-----
improved harddisk performance under high load

------------
Linux kernel
------------
fixed crash when transfering files via network
better hdd detection
small usb fix
improved stability

---------------------------
secondstage loader 83 -> 84
---------------------------
improved flash error correction

------------------------------------------
hardware drivers (20110309 -> 20110902)
------------------------------------------
added 3D framebuffer support (for side by side and top and bottom 3D services)
(no auto detection yet)
fixed audio sync problems on playback to live transition
fixed async audio on playback to live transition and on bootup on H264 services
fixed freeze after some channel changes
fixed possible locking problems (deadlock)
dvi audio didn't work reliably after cold boot
throttled mpeg decoder debug output a bit
better /proc/stb(vmpeg/X/dst_* handling via dst_apply
small alsa signed / unsigned fix

bcm4505/06:
added blindscan support
readback corrected symbolrate and frequency
added constellation buffer read support
fixed tuner crash (no hab ack messages in kernel debug)
fixed standby problems
added possibility to use SCPC optimized search ranges
fixed manual LDPC FEC modes
small typo fixed

alps-bsbe1-c01a
added blindscan support
added constellation buffer read support
fixed locking problems (better performance)

cxd1981:
fixed tuner problems after bootup from deepstandby in DVB-C mode
optimized DVB-C a bit
add possibilty for faster mode change via FE_SET_PROPERTY DTV_DELIVERY_SYSTEM ioctl

dvb-s2 tuners:
fixed readback of current pilot state

[Джак]

---------------------------
secondstage loader 83 -> 84
---------------------------
improved flash error correction

Щом са оправили това, може да се престраша да го инсталирам при първа възможност.

[Sharp987]

Само за DM 7020 HD:

Enigma2: Release 3.2.1
Machine: Dreambox dm7020hd
Date: 20111109
Issuer: Dream Multimedia
Link: http://sources.dreamboxupdate.com/opendr...dm7020hd/rel_32
MD5: 5498d3f33fd9fd81265fb22ee7552d87
Description:
--------------------------------
CHANGELOG DM7020HD RELEASE 3.2.1
--------------------------------
------------------------------------------
enigma2 (20110929 rel32 -> 20111109 rel32)
------------------------------------------
  fixed sometimes not correctly mounted harddiscs after bootup
  fixed coverart display in media player
  fixed switching of regional broadcast window (WDR3 et al.)
  fixed crash on recordpath selection
  fixed wizard "no scan question/default services question" after DVB-C/T hybrid tuner type change
  fixed some alternative skins (rc0-rc2.png was missing)
  fixed language selection (speed)
  fixed IPTV services in bouquet without SID
  fixed inoperable PVR/TV button (dreambox keyboard)
  fixed EPG encoding for RTL/Eurosport Transponder on Astra 19.2
  record timers: fixed invalid conflicts on creation of new timers, when using the DVB-C/T tuner module
  worked on NAS recording performance
  optimized new file erase algo a bit (take care of hardlinks and softlinks)
  added support for externally linked tuners

---------------------------------------
hardware drivers (20110928 -> 20111109)
---------------------------------------
  fixed support for transponders with high bitrate (no CI yet)
  fixed 1080p23/24/30 support
  fixed LED handling (like dm8000 now)
  fixed inoperable AUDIO button on DM7020HD remote control (dip switch depending)

bcm4505:
  optimized blindscan (ignore TPs found twice, low SR crash)
  fixed init after deepstandby
  fixed sometimes incorrectly detected modulation and system during blind scan (QPSK <-> 8PSK, DVB-S <-> DVB-S2)

[Sharp987]

Enigma2: Release 3.2.1
Вече и за всички останали модели с енигма2.

[Sharp987]

iCVS-Image from 21.11.2011


Version details:
Enigma2 from 10.11.2011
Plugins from 22.11.2011
Skins from 31.10.2011
Treiber from 09.11.2011 (DM500hd, DM800, DM800se, DM8000)
Treiber from 22.11.2011 (DM7020HD)
Secondstageloader 84 (DM500hd, DM800, DM800se, DM8000, DM7020HD)

Experimental / own update feed


Extras / included changes:
- Gemini plugin reade (GeminiWizard already included)
- dcccamd removed from the image
- own iCVS bootlogos by yvessun
- Support for Smargo usb Cardreader FTDI_SIO and PL203
- Spinner fix (bootlogo)
- Startvolume set down to 30%
- Expert mode as standard in the customization menu
- iCVS adapted Keymapxml
- Change of Yes/No in the startwizard at the child safety pin question
- sambaserver removed from the image
- Ready for Karatelight from @mamba0815 and LowFat from @gutemine
- DVD Burn removed from 8K image, can/should be installed over the feed.
- rt2570 and rt3070 WLAN drivers added to the feed
- IPv6 and CPU FREQ Kerneladaptions


New:
Initramfs Kernel Vers. 1.8 (THX @gutemine)


Further Informations:
There are no Cams, Cam Configs, Settings,... availabe on the feed.
This image can be used as a base for the Gemini plugin.

Although can be installed userscript, if you don't want to use the Gemini plugin.

[avtosat]

iCVS-Image from 21.11.2011
........

От снощи съм с него на DM800SE и имам следния проблем - бутона "Bouquet -" не ми вади списъка с канали , докато с другия "Bouquet +" няма проблем. Има ли начин да се направи да работи ,така си е от имиджа или нещо при мен се е омазало. Все пак 3 години съм ползвал "Bouquet -" и колкото и да са близко един до друг сега ми е терсене да натискам плюса.

[Sharp987]

От снощи съм с него на DM800SE и имам следния проблем - бутона "Bouquet -" не ми вади списъка с канали , докато с другия "Bouquet +" няма проблем. Има ли начин да се направи да работи ,така си е от имиджа или нещо при мен се е омазало. Все пак 3 години съм ползвал "Bouquet -" и колкото и да са близко един до друг сега ми е терсене да натискам плюса.

На последните имиджи е така настройката - иди в потребителските настройки и си го обърни и ще се оправи. Сега точно не мога да ти кажа къде, чак довечера. Намира се там където се настройва и времето колко секуди да ти стой инфобара при преминаване на друга програма.

[avtosat]

На последните имиджи е така настройката - иди в потребителските настройки и си го обърни и ще се оправи. Сега точно не мога да ти кажа къде, чак довечера. Намира се там където се настройва и времето колко секуди да ти стой инфобара при преминаване на друга програма.

С последния от септември не ми е правил този проблем.
Иначе намерих опция в настройките ама и на вкл и на изкл ве е едно също - работи само плюса. Някой ако знае в кой файл се намира подредбата ще помоля да го качи да пробвам да го заменя . Ще изчакам до вечерта и ако не реша проблема ще пробвам да го префлашна.
Предварително благодаря!

[Джак]

Вероятно проблемът идва от тук:

- iCVS adapted Keymapxml

Нещо са барникали из кеймапа.

[avtosat]

Някой ако е със стар iCVS нека да качи или да постне съдържанието на keymap файла.

[Sharp987]

Щом си намерил опцията ... друго не се сещам.
Ето ти един кеймап на iCVS стар от 14.12.2010 на компа ми е от времето когато се занимавах със скинове.

   
   
   

   
   
   

   
   
   

   
   
   
   
   
   
   

   

   
   
   
   
   
   
   
   
   

   

   

   

   

   
   
   
   
   

       

   

   

   

   

   

   

   
   
   
   
   

   
   
   

   

   

   

   

   

   

   
   
   

   
   
   

   
   
   
   
   

   

   
   
   

   
   
   
       
   
   

   
   
   

[avtosat]

Благодаря ти Sharp ама не се оправи така , дори вече и с Bouquet + не се извиква channellist-a. Някой ако има други идеи да казва.