Vu Duo

[Ники]

vu duo twin linux HDTV


Specifications:
Open-source Linux operating system (Enigma2)
Broadcom Mips processor
Twin DVB-S2 Tuner
MPEG2 / H.264 Hardware decoding (DVB compliant)
16 digit alphanumeric VFD Display
2 x Common Interface slots
2 x smartcard reader (Conax Embedded)
10/100 Mbps Ethernet interface
3 x USB2.0 (1xFront/2xBack)
1 x internal SATA connection for HDD (not included)  
1 x E-SATA
1 x V.24/RS232
HDMI Interface
2 x Scart
1 x YPrPb
1 x optical S / PDIF for digital audio transmission
Channel change <1 seconds
EPG (electronic program guide)
Plugin support (JPEG, MP3, XviD ...)
Support of Bouquet lists
Multi language OSD, Skin - Support
Fully automatic, Manual Channel Search
Videotext Teletext
DiSEqC 1.0, 1.1 and 1.2

Video:
Video resolution (720 x 576 lines), 576p, 720p, 1080i
Video decoding MPEG-2, MPEG-4 compatible
Input data rate 2-45 MSymb / s
S/N> 53 dB

Audio:
Decoding AC 3, MPEG-4 (AAC-HE), MPEG-1, Layer 1, 2 and 3
32/44.1/48 kHz sampling rate
S/N > 65 dB

Power consumption:
<25W (in operation, horizontal /) 400mA LNB current
<20W (in operation, without LNB)
<1W (Deep-Standby-Mode)  
100-240 Volts 50-60 Hz

Купете го сега от тук:
http://www.sky-digital.eu/STB_HD.htm#STBVUDUO

[Ники]

A brief flash guide
Start
the Flash tool VU + Util Start



Select your COM Port



Deselect DHCP if you have not setup IP VU + duo



Then click on Connect button



Now you should see Serial port open Please turn on your box.
Do this with on power switch For Ethernet Flash Tick DHCP is set next Click on Set IP button an



Now youll see "IP Setup Success" in the VU + Util



Click open and select your NFI image file.



Press the flash Button
VU + Util then says "Reading file, please wait a moment ..."



Wait till you see flashing process is completed



Now the update is finished and you can disconnect and then finish with a Click on the Exit button VU + Util.

Now power off then on.