XPEED LX1_OpenATV 6.2 Oscam конфигуриране

[Kosme]

Здравейте колеги, вчера флашнах OpenATV 6.2 за въпросния приемник, но нещо не мога да се справя с подкарването на Oscam от  Z******m.
С конфигурирането на Mgcamd 1.35a се справих - работи без проблем! Прилагам лог от oscam_atv 1.2 11353.

2018/02/12 22:00:31 6E3DF2BF c   (dvbapi) Demuxer 0 trying to descramble PID 0 CAID 4AEE PROVID 000000 ECMPID 0F0C ANY CHID PMTPID 01FB VPID 01F9
2018/02/12 22:00:31 6E3DF2BF c      (ecm) dvbapiau (4AEE@000000/0000/0016/4F:5FA589EEB53F79ED6DA2044E09952AFA): not found (8 ms) by Reader-21
2018/02/12 22:00:32 6E3DF2BF c   (dvbapi) Demuxer 0 restarting decodingrequests after 0 ms with 1 enabled and 0 disabled ecmpids!
2018/02/12 22:00:32 6E3DF2BF c   (dvbapi) Demuxer 0 no suitable readers found that can be used for decoding!
2018/02/12 22:00:32 6E3DF2BF c   (dvbapi) Demuxer 0 trying to descramble PID 0 CAID 4AEE PROVID 000000 ECMPID 0F0C ANY CHID PMTPID 01FB VPID 01F9
2018/02/12 22:00:33 6E3DF2BF c      (ecm) dvbapiau (4AEE@000000/0000/0016/4F:F9CE196015801CCB9BF09488E569948C): not found (16 ms) by Reader-21
2018/02/12 22:00:33 6E3DF2BF c   (dvbapi) Demuxer 0 restarting decodingrequests after 0 ms with 1 enabled and 0 disabled ecmpids!
2018/02/12 22:00:33 6E3DF2BF c   (dvbapi) Demuxer 0 no suitable readers found that can be used for decoding!
2018/02/12 22:00:34 6E3DF2BF c   (dvbapi) Demuxer 0 trying to descramble PID 0 CAID 4AEE PROVID 000000 ECMPID 0F0C ANY CHID PMTPID 01FB VPID 01F9
2018/02/12 22:00:35 6E3DF2BF c      (ecm) dvbapiau (4AEE@000000/0000/0016/4F:F9CE196015801CCB9BF09488E569948C): not found (6 ms) by Reader-21
2018/02/12 22:00:35 6E3DF2BF c   (dvbapi) Demuxer 0 restarting decodingrequests after 0 ms with 1 enabled and 0 disabled ecmpids!
2018/02/12 22:00:35 6E3DF2BF c   (dvbapi) Demuxer 0 no suitable readers found that can be used for decoding!
2018/02/12 22:00:36 6E3DF2BF c   (dvbapi) Demuxer 0 trying to descramble PID 0 CAID 4AEE PROVID 000000 ECMPID 0F0C ANY CHID PMTPID 01FB VPID 01F9

• 2018/02/12 23:40:12 11A4359B h   (reader) Reader-20 [cccam] Restarting reader
• 2018/02/12 23:40:12 11A4359B h   (reader) Reader-20 [cccam] creating thread for device q8ia3xjt.xconnect.info
• 2018/02/12 23:40:12 6F8134E7 p   (reader) q8ia3xjt.xconnect.info: resolved ip=212.129.6.153
• 2018/02/12 23:40:12 6F8134E7 p   (reader) Reader-20 [cccam] connecting to q8ia3xjt.xconnect.info:1001
• 2018/02/12 23:40:12 6F8134E7 p   (reader) Reader-20 [cccam] connect failed: Connection refused
• 2018/02/12 23:40:12 6F8134E7 p   (reader) Reader-20 [cccam] proxy initialized, server q8ia3xjt.xconnect.info:1001
• 2018/02/12 23:40:17 7FE388A7 c   (dvbapi) Demuxer 0 no enabled matching ecmpids -> decoding is waiting for matching readers!

Къде бъркам? Какъв проткол на задам при създаването на рийдъра cccam или newcamd?

[spaice]

Влез си в кабинета на гаргата и там в настройки си провери портовете.
Мисля, че при cccam трябва порта да ти е 1003.

[вассил46]

На mgcam със Cccam list или с newcam лист.
Колегата мисля е прав порта е 1003.

OSCAM

[reader]
label=##############
enable=1
protocol=cccam
device=###############,1003
user=#########
password=########
cccversion=2.1.2
group=1
inac****tytimeout=1
reconnecttimeout=30
lb_weight=100
cccmaxhops=10
ccckeepalive=1

[Kosme]

Благодаря колеги за съвета, довечера след работа ще променя порта, в гаргата найстина е 1003!