Newnigma2 DM800 Images

[tonibg]

Newnigma2 team proudly presents:
Newnigma2 v3.2
####################################################
 
 

Basics:

• Enigma2 2.6: 24.03.2011
  
• Enigma2 Plugins 2.6: 24.03.2011
  
• Newnigma2 Plugins: 24.03.2011

DM 800 HD se

• driver: 09.03.2011
  
• secondstage: 82
  
• kernel 2.6.18

DM 800 HD PVR

• driver: 09.03.2011
  
• secondstage: 82
  
• kernel: 2.6.18

DM 8000 HD PVR

• driver: 15.03.2011
  
• secondstage: 83
  
• kernel: 2.6.18

DM 500 HD

• driver: 09.03.2011
  
• secondstage: 83
  
• kernel: 2.6.18

DM 7025(+)

• driver: 08.12.2010
  
• secondstage: 83
  
• kernel 2.6.12

Changes:

• Bugfix: some small fixes in ecamdctrl
• Update: xmltvimport plugin and sources/channels updated
• Added: driver for Realtek 802.11n USB wireless LAN controllers
• Added: enigma2-plugin-extensions-serienfilm
• Added: enigma2-plugin-extensions-webbouqueteditor

Notice: No update possible. U have to flash our new image. The new kernel and secondstage update for the Dreambox 8000 allows you to use the full flash size of 256MB.
 
Multiboot: No support for multiboot. Not planned. No need for such a tool.
 
GP3wizard: No support for gp3wizard. Probably not running. Not needed in Newnigma2 environment.
 
Images:
 

 
 

[vassilp]

С Newnigma2 (Release v3.1.4) 76Д и Дбокс 800 clone съм. Въпреки, че в менюто разреших достъп до уеб интерфейса не мога да направя връзката с компа. Трябва ли да инсталирам някакъв допълнителен плъгин или да сменям имиджа? И второ - откъде да си намеря скин за Newnigma2, показващ инфо за съответния транспордер. Търсих в нета и по специално на

[tonibg]

Newnigma2 team proudly presents:
Newnigma2 v3.2.1
####################################################

Basics:

• Enigma2 2.6: 04.05.2011
  
• Enigma2 Plugins: 04.05.2011
  
• Newnigma2 Plugins: 04.05.2011
  

DM 500 HD

• driver: 04.05.2011
  
• secondstage: 83
  
• kernel: 2.6.18

DM 800 HD PVR

• driver: 04.05.2011
  
• secondstage: 82
  
• kernel: 2.6.18

DM 800 HD se

• driver: 04.05.2011
  
• secondstage: 82
  
• kernel 2.6.18

DM 7025(+)

• driver: 04.05.2011
  
• secondstage: 83
  
• kernel 2.6.12

DM 8000 HD PVR

• driver: 04.05.2011
  
• secondstage: 83
  
• kernel: 2.6.18

Changes:

• Bugfix: harddisk temperature informations wasn't always shown
• Bugfix: firmware update check fixed
• Bugfix: devicemanager fixed
• Bugfix: cleanup newnigma2-webradio.xml
• Bugfix: some udev problems fixed
• Bugfix: some openvpn problemes fixed
• Update: xmltvimport source and channels updated
• Update: gst-plugins-bad fix ac3 audio problems
• Update: newnigma2 Plugins now using the Universally Unique Identifier -> this fixes "the picon problem"
• Added: enigma2-plugin-newnigma2-vpn. this is a simple start/stop openvpn-gui
• Added: enigma2-plugin-extensions-enhancedmoviecenter 2.01 to our feeds
• Added: Xface-MD skin from Kerni to our feeds *thx to Kerni*
• Added: Kerni-HD1 to our feeds *thx to Kerni*
• Added: enabled event progressbar by default in the channelselection only 500HD

Notice: Onlineupdate from v3.2 is possible.

Multiboot: No support for multiboot. Not planned. No need for such a tool.

GP3wizard: No support for gp3wizard. Probably not running. Not needed in Newnigma2 environment.

[tonibg]

Newnigma2 team proudly presents:
Newnigma2 v3.2.2 online update
####################################################

Basics:

• Enigma2 2.6: 07.07.2011
  
• Enigma2 Plugins: 07.07.2011
  
• Newnigma2 Plugins: 07.07.2011
  

DM 500 HD

• driver: 06.05.2011
  
• secondstage: 83
  
• kernel: 2.6.18

DM 800 HD PVR

• driver: 06.05.2011
  
• secondstage: 82
  
• kernel: 2.6.18

DM 800 HD se

• driver: 06.05.2011
  
• secondstage: 82
  
• kernel 2.6.18

DM 7025(+)

• driver: 06.05.2011
  
• secondstage: 83
  
• kernel 2.6.12

DM 8000 HD PVR

• driver: 06.05.2011
  
• secondstage: 83
  
• kernel: 2.6.18

Changes:

• Bugfix: epg fixed for some german channels (fixed by ghost thx)
• Bugfix: webradio better errorhandling and oled layout changed
• Bugfix: skins with cryptcions can be used again
• Bugfix: installer: new error handling for gui
• Bugfix: picon installation fixed and freespace check now works
• Bugfix: configsaver allows ftp-setup if there is no other device available
• Bugfix: eCamdctrl fix possible greenscreen if no camd is installed
• Bugfix: systeminformation hddinfo fixed (remember some samsung hdd have smart monitoring not activated)
• Added: Kerni.NN2.No1-MD (thx to Kerni)
• Added: keymap_custom.xml for custom keymap (select it via keymapselector)
• Added: enigma2-plugin-extensions-pluginsort to our feeds
• Added: enigma2-plugin-extensions-namezap to our feeds
• Added: enigma2-plugin-extensions-pluginhider to our feeds
• Added: enigma2-plugin-extensions-movieepg to our feeds
• Added: enigma2-plugin-extensions-pipzap only for 7025 and 8000 (thx to ritzMo for this 5 new plugins)
• Added: enabled event progressbar by default in the channelselection

Notice: Onlineupdate from v3.2(.x) is possible.

Multiboot: No support for multiboot. Not planned. No need for such a tool.

GP3wizard: No support for gp3wizard. Probably not running. Not needed in Newnigma2 environment.


Your
Newnigma2 Team


##################################
Hinweise vom team:
- only online update, no nfi image (keine nfi image, nur onlineupdate )
##################################

[tonibg]

####################################################
Newnigma2 team proudly presents:
Newnigma2 v3.3
####################################################
 

Basics:

• Enigma2 3.2: 28.09.2011
  
• Enigma2 Plugins: 03.11.2011
  
• Newnigma2 Plugins: 03.11.2011
  

DM 500 HD

• driver: 03.09.2011
  
• secondstage: 84
  
• kernel: 2.6.18

DM 800 HD PVR

• driver: 03.09.2011
  
• secondstage: 84
  
• kernel: 2.6.18

DM 800 HD se

• driver: 03.09.2011
  
• secondstage: 84
  
• kernel 2.6.18

DM 7020 HD

• driver: 02.11.2011
  
• secondstage: 84
  
• kernel 2.6.12

DM 8000 HD PVR

• driver: 03.09.2011
  
• secondstage: 84
  
• kernel: 2.6.18

Notice: Onlineupdate is not possible.
 

Changes:

• Bugfix: some small fixes for openvpn
• Bugfix: configsaver crashed when u restored a playlist, which already exists. fixed saving on a medium which is formatted in fat
• Bugfix: some devicemanger fixes
• Bugfix: installer for picon installation with all kind of devices which have a non alphanumeric character in the devicename
• Bugfix: dvd/cd playing fixed. dvdautomount removed from expert settings. not longer needed
• Added: Kerni.NN2.No2-MD (thx to Kerni)
• Added: enigma2-plugin-extensions-mediadownloader depend for simplerss
• Added: enigma2-plugin-extensions-yttrailer (thx to _Dr_Best_)
• Removed: xmltvimport from feeds. not longer works with new e2
• For Skinners: rc.png and rcold.png renamed to rc0.png und rc1.png. new rc2.png is rc of new dm7020hd. New screen: SatBlindscanState
• Info: mkv + idx/sub not longer work with new e2. pls feel free to post in dmm forum.
• changelog e2: dm8000 dm800hd dm800hd se dm500hd
  

IMPORTANT: Starting today (that was 05.09.2011) images for the models DM500HD, DM800 SE and DM800HD PVR include an improved flash error correction feature.
 
In order to benefit from the improvements, it is required that you either flash the new image with the latest version of DreamUP (V1.3.3.9) or flash a new second stage loader ( DM500HD DM800HD PVR DM800 SE ) before flashing the image via your browser or other means.
 
 
WICHTIG: Seit dem heutigen Tag (das war der 05.09.2011) enthalten die Images für die Dreambox Modelle DM500HD, DM800 SE und DM800HD PVR eine verbesserte Fehlerkorrektur für den Flash-Speicher.
 
Um die Neuerungen benutzen zu können, muss entweder ein vollständiges, neues Image mit der neuesten Version von DreamUP (V1.3.3.9) geflasht werden, oder zunächst ein neuer Second Stage Loader ( DM500HD DM800HD PVR DM800 SE ) installiert werden, bevor darüber ein neues Image geflasht wird.
 
 
SECONDSTAGE DOWNLOAD: DM500HD DM800 DM800HD se
 
here u can find USB to UART driver
 
info: since release of e2 v. 3.2 there is no dm7025 support yet. that's what dmm said.
 
Multiboot: No support for multiboot. Not planned. No need for such a tool.
 
GP3wizard: No support for gp3wizard. Probably not running. Not needed in Newnigma2 environment.
 
 
Your
Newnigma2 Team


Threads:

[tonibg]

Newnigma2 v3.3.1 Online Update

Basics:

• Enigma2 3.2.1: 10.11.2011
• Enigma2 Plugins: 14.11.2011
• Newnigma2 Plugins: 14.11.2011

DM 800 HD PVR

• driver: 09.11.2011
• secondstage: 84
• kernel: 2.6.18

Notice: Onlineupdate from v3.3 is possible.

Changes:

• Updated: enigma2 to release 3.2.1
• Updated: new NTFS-3G driver
• Bugfix: Zydas WLAN driver
• Bugfix: default settings would be used now, but only if u flash a new image
• Added: new expert settings: now u can choose, that opkg ignore nfs/cifs shares or the internal Harddisk
• Removed: enigma2-plugin-newnigma2-wetter and ushare

For Skinners: new screens (menu -> settings -> system -> harddisk):
HarddiskDriveSelection - HarddiskDriveSetup - HarddiskMountpointBrowser

Info: mkv + idx/sub not longer work with new e2. pls feel free to post in dmm forum.

Changelog e2: dm800hd


Info: since release of e2 v. 3.2 there is no dm7025 support yet. that's what dmm said.

Multiboot: No support for multiboot. Not planned. No need for such a tool.

GP3wizard: No support for gp3wizard. Probably not running. Not needed in Newnigma2 environment.


Your
Newnigma2 Team

[dodo_pv]

Хубавото на тази енигма е, че при отваряне на 3D SBS канал, подва сигнал към ТV за автоматична смяна на формана (само по порт HDMI 1.4). Мен ме интересува как разбирате това: "Info: mkv + idx/sub not longer work with new e2"? Означава ли, че изобщо няма да се поддържа този формат или само субтитрите?