проблем с Oscam

[Жоро]

Я влез в /var/script и дай съдържанието на този файл CCcam_2.2.1_oscam_1.00_cam.sh при теб може леко да се разминава името.

case "$1" in
  start)
  echo "[SCRIPT] $1: $CAMNAME"
  remove_tmp
  /var/bin/oscam_1.00 &
  sleep 15
  /var/bin/CCcam_2.0.11 &
  ;;
  stop)
  echo "[SCRIPT] $1: $CAMNAME"
  kill `pidof oscam_1.00 `
  killall oscam_1.00 CCcam_2.0.11 2>/dev/null
  sleep 2
  remove_tmp
  ;;
  *)
  $0 stop
  exit 0
  ;;
esac

exit 0

[Георги1]

Скрипта си е правилен първо си стартира оскама и после кккама.

[Жоро]

но в telnet под "TOP" работи само cccam а oscam не се вижда

[Георги1]

но в telnet под "TOP" работи само cccam а oscam не се вижда

Там е ама се показва по рядко.
Пробвай с команда   ps

[Жоро]

след рестарт на дриима се появява но само инфото работи
но там няма нищо

[galiano]

Жоро, както снощи ти казах, вероятно ццкам-а ти взема четеца преди оскам и това е проблема. Ццкам си вземе четеца по подразбиране, без значение дали има редове за активирането му в конфига.
Пробвай да забраниш на ццкам да взема четеца с тази настройка:

Код [Маркирай кода] Разшири

SERIAL READER : /dev/null
А в стартовия скрипт, кажи на ццкам да се стартира с по-голямо закъснение, примерно 50 секунди след оскам, вместо сегашните 15

промени sleep 15 на sleep 50

Помени и самата команда за стартиране, задай я в този вид:

Код [Маркирай кода] Разшири

/var/bin/oscam_1.00 -b

[Жоро]

значи до сега пробвах различни версии на oscam
но не става
дори инфото не винаги след рестарт се появява

[бебезавър]

Пробвай да стартираш само оскам без цц да видим дали пак ще ти дава грешка при достъпа до /dev/sci0

[uniqad]

При мен винаги когато активирам cccam reader + dvbapi като клиент и оскама става изключително лаком за виртуална памет! След рестарт на емулатора се почва с около 20мб ползван суоп и след два часа работа вече е над 50мб и енигмата влачи от време на време. Това се харчи само от оскама! Найса си е както обикновено -1, а при нюкамд рийдър гладът за памет липсва.
Та мисълта ми е да не би това да е причината за постоянните проблеми при комбинацията оскам+cccam?

[дан4ик]

помагайте инсталирах oskam 1.00 svn 4574 на dm800 hd но не мога да го подкарам като клиент на сървар ето лог файл:>> OSCam <<  cardserver started at Sun Sep 18 22:16:03 2011
-------------------------------------------------------------------------------
2011/09/18 22:16:03 2AAC6850 s >> OSCam <<  cardserver started version 1.00-unstable_svn, build #4574 (mips-tuxbox-linux)
2011/09/18 22:16:03 2AAC6850 s version=1.00-unstable_svn, build #4574, system=mips-tuxbox-linux, nice=-1
2011/09/18 22:16:03 2AAC6850 s client max. idle=9999999 sec, debug level=0
2011/09/18 22:16:03 2AAC6850 s max. logsize=500 Kb
2011/09/18 22:16:03 2AAC6850 s client timeout=5000 ms, fallback timeout=2500 ms, cache delay=0 ms
2011/09/18 22:16:03 2AAC6850 s auth size=4976
2011/09/18 22:16:03 2AAC6850 s Cannot open file "/var/tuxbox/config/oscam.services" (errno=2)
2011/09/18 22:16:03 2AAC6850 s userdb reloaded: 1 accounts loaded, 0 expired, 0 disabled
2011/09/18 22:16:03 2AAC6850 s signal handling initialized (type=sysv)
2011/09/18 22:16:03 2AAC6850 s can't open file "/var/tuxbox/config/oscam.srvid" (err=2), no service-id's loaded
2011/09/18 22:16:03 2AAC6850 s can't open file "/var/tuxbox/config/oscam.tiers" (err=2), no tier-id's loaded
2011/09/18 22:16:03 2AAC6850 s can't open file "/var/tuxbox/config/oscam.provid" (err=2), no provids's loaded
2011/09/18 22:16:03 2AAC6850 s can't open file "/var/tuxbox/config/oscam.ird" (errno=2) irdeto guessing not loaded
2011/09/18 22:16:03 2AAC6850 s monitor: disabled
2011/09/18 22:16:03 2AAC6850 s camd33: disabled
2011/09/18 22:16:03 2AAC6850 s camd35: disabled
2011/09/18 22:16:03 2AAC6850 s cs378x: disabled
2011/09/18 22:16:03 2AAC6850 s newcamd: disabled
2011/09/18 22:16:03 2AAC6850 s cccam: disabled
2011/09/18 22:16:03 2AAC6850 s radegast: disabled
2011/09/18 22:16:03 2AAC6850 s http thread started
2011/09/18 22:16:03 2AAC6850 s creating thread for device serv5.zargacum.net
2011/09/18 22:16:03 2AEE74B0 h HTTP Server listening on port 8888
2011/09/18 22:16:03 2AFE74B0 p proxy thread started  (thread=2AFE74B0, label=vip, server=serv5.zargacum.net)
2011/09/18 22:16:03 2AFE74B0 p connecting to serv5.zargacum.net
2011/09/18 22:16:03 2AAC6850 s loadbalancer: can't read from file /tmp/.oscam/stat
2011/09/18 22:16:03 2AAC6850 s waiting for local card init
2011/09/18 22:16:03 2AAC6850 s init for all local cards done
2011/09/18 22:16:03 2AAC6850 s anti cascading disabled
2011/09/18 22:16:03 2AFE74B0 p serv5.zargacum.net: resolved ip=84.16.240.217
2011/09/18 22:16:03 2B13F4B0 c plain dvbapi-client granted (root, au(auto)=0)
2011/09/18 22:16:03 2B13F4B0 c dvbapi: can't open priority file /var/tuxbox/config/oscam.dvbapi
2011/09/18 22:16:03 2AFE74B0 p cccam(r) vip:  login failed, pwd ack not received (n = 0)
2011/09/18 22:16:05 2B13F4B0 c dvbapi: [ADD PID 0] CAID: 0D06    ECM_PID: 0215    PROVID: 000000
2011/09/18 22:16:05 2B13F4B0 c dvbapi: [ADD PID 1] CAID: 0B01    ECM_PID: 0216    PROVID: 000000
2011/09/18 22:16:05 2B13F4B0 c dvbapi: new program number: 1589 (0D06:1589 unknown)
2011/09/18 22:16:05 2B13F4B0 c root (0D06&0000C0/1589/B4:03FB): rejected user ident (0 ms) (of 0 avail 0) (no card support 0D06:0000C0)
2011/09/18 22:16:06 2B13F4B0 c dvbapi: try pids again #1
2011/09/18 22:16:06 2B13F4B0 c root (0B01&000000/1589/67:67B7): rejected user ident (1 ms) (of 0 avail 0) (no card support 0B01:000000)
2011/09/18 22:16:06 2B13F4B0 c root (0D06&0000C0/1589/B4:03FB): rejected user ident (0 ms) (of 0 avail 0) (no card support 0D06:0000C0)
2011/09/18 22:16:06 2B13F4B0 c dvbapi: try pids again #2
2011/09/18 22:16:06 2B13F4B0 c root (0B01&000000/1589/67:67B7): rejected user ident (0 ms) (of 0 avail 0) (no card support 0B01:000000)
2011/09/18 22:16:06 2B13F4B0 c root (0D06&0000C0/1589/B4:03FB): rejected user ident (0 ms) (of 0 avail 0) (no card support 0D06:0000C0)
2011/09/18 22:16:06 2B13F4B0 c dvbapi: try pids again #3
2011/09/18 22:16:06 2B13F4B0 c dvbapi: can't decode channel
2011/09/18 22:16:06 2B13F4B0 c root (0B01&000000/1589/67:67B7): rejected user ident (0 ms) (of 0 avail 0) (no card support 0B01:000000)                                                                                                                          и файл  oscam server [reader]
enable = 0
label = VIP
protocol = newcamd
key = 0102030405060708091011121314
device =  serv5.zargacum.net,1003
account = .......,.......
group = 1
fallback = 0
ReconnectTimeout = 10

[reader]
enable = 0
label = VIP
Protocol = camd35
device = serv5.zargacum.net,1001
account = ..........,.........
group = 1
fallback = 0
ReconnectTimeout = 10                                                                                                                                              
[reader]
enable = 1
label = VIP
protocol = cccam
device = serv5.zargacum.net,1003
account = ..........,..........
group = 1
ReconnectTimeout = 10
cccversion = 2.2.1                                                                               файл oscam conf                                                                              [global]
nice = -1
WaitForCards = 1
#pidfile = /var/run/oscam.pid
#logfile = /var/mnt/hdd/oscam.log
MaxLogSize = 500
ClientTimeout = 5
ClientMaxIdle = 9999999

[dvbapi]
enabled = 1
user = root
au = 1
boxtype = dreambox

[webif]
httpport = 8888
#httpuser = root
#httppwd = ..........
httpallowed = 127.0.0.1,192.168.0.0-192.168.255.255                                                  къде бъркам

[дан4ик]

помагайте инсталирах oskam 1.00 svn 4574 на dm800 hd но не мога да го подкарам като клиент                                                                                                                           [global]
nice = -1
WaitForCards = 1
#pidfile = /var/run/oscam.pid
#logfile = /var/mnt/hdd/oscam.log
MaxLogSize = 500
ClientTimeout = 5
ClientMaxIdle = 9999999

[dvbapi]
enabled = 1
user = root
au = 1
boxtype = dreambox

[webif]
httpport = 8888
#httpuser = root
#httppwd = ..........
httpallowed = 127.0.0.1,192.168.0.0-192.168.255.255                                       [reader]
enable = 1  
label = VIP
protocol = cccam
device = serv5.zargacum.net,1003
account = ........,........
group = 1
ReconnectTimeout = 10
cccversion = 2.2.1                                                                       [account]
User = ..........
Pwd = ..........
Uniq = 0
Group = 1
Chid = 0652:0015,FFFF,01;0654:01;0602:00,0001,0019,0032,0 043
Ident = 0500:023700;0602:000000;0652:0;0654:0;4AE1:0;090F: 0;0B01:000000
log fail                                                                           -------------------------------------------------------------------------------
>> OSCam <<  cardserver started at Mon Sep 19 13:06:30 2011
-------------------------------------------------------------------------------
2011/09/19 13:06:30 2AAC6850 s >> OSCam <<  cardserver  started version 1.00-unstable_svn, build #4574 (mips-tuxbox-linux)
2011/09/19 13:06:30 2AAC6850 s version=1.00-unstable_svn, build #4574, system=mips-tuxbox-linux, nice=-1
2011/09/19 13:06:30 2AAC6850 s client max. idle=9999999 sec, debug level=0
2011/09/19 13:06:30 2AAC6850 s max. logsize=500 Kb
2011/09/19 13:06:30 2AAC6850 s client timeout=5000 ms, fallback timeout=2500 ms, cache delay=0 ms
2011/09/19 13:06:30 2AAC6850 s auth size=4976
2011/09/19 13:06:30 2AAC6850 s Cannot open file "/var/tuxbox/config/oscam.services" (errno=2)
2011/09/19 13:06:30 2AAC6850 s userdb reloaded: 1 accounts loaded, 0 expired, 0 disabled
2011/09/19 13:06:30 2AAC6850 s signal handling initialized (type=sysv)
2011/09/19 13:06:30 2AAC6850 s can't open file "/var/tuxbox/config/oscam.srvid" (err=2), no service-id's loaded
2011/09/19 13:06:30 2AAC6850 s can't open file "/var/tuxbox/config/oscam.tiers" (err=2), no tier-id's loaded
2011/09/19 13:06:30 2AAC6850 s can't open file "/var/tuxbox/config/oscam.provid" (err=2), no provids's loaded
2011/09/19 13:06:30 2AAC6850 s can't open file "/var/tuxbox/config/oscam.ird" (errno=2) irdeto guessing not loaded
2011/09/19 13:06:30 2AAC6850 s monitor: disabled
2011/09/19 13:06:30 2AAC6850 s camd33: disabled
2011/09/19 13:06:30 2AAC6850 s camd35: disabled
2011/09/19 13:06:30 2AAC6850 s cs378x: disabled
2011/09/19 13:06:30 2AAC6850 s newcamd: disabled
2011/09/19 13:06:30 2AAC6850 s cccam: disabled
2011/09/19 13:06:30 2AAC6850 s radegast: disabled
2011/09/19 13:06:30 2AAC6850 s http thread started
2011/09/19 13:06:30 2AAC6850 s creating thread for device serv5.zargacum.net
2011/09/19 13:06:30 2AAC6850 s loadbalancer: can't read from file /tmp/.oscam/stat
2011/09/19 13:06:30 2AAC6850 s waiting for local card init
2011/09/19 13:06:30 2AAC6850 s init for all local cards done
2011/09/19 13:06:30 2AAC6850 s anti cascading disabled
2011/09/19 13:06:30 2AEE74B0 h HTTP Server listening on port 8888
2011/09/19 13:06:30 2AFE74B0 p proxy thread started  (thread=2AFE74B0, label=vip, server=serv5.zargacum.net)
2011/09/19 13:06:30 2AFE74B0 p connecting to serv5.zargacum.net
2011/09/19 13:06:30 2B0E74B0 c plain dvbapi-client granted (anonymous, au(auto)=0)
2011/09/19 13:06:30 2B0E74B0 c dvbapi: can't open priority file /var/tuxbox/config/oscam.dvbapi
2011/09/19 13:06:30 2AFE74B0 p serv5.zargacum.net: resolved ip=84.16.240.217
2011/09/19 13:06:30 2AFE74B0 p cccam(r) vip:  login failed, pwd ack not received (n = 0)
2011/09/19 13:06:32 2B0E74B0 c dvbapi: [ADD PID 0] CAID: 0B01   ECM_PID: 0218   PROVID: 000000
2011/09/19 13:06:32 2B0E74B0 c dvbapi: [ADD PID 1] CAID: 0D06   ECM_PID: 0217   PROVID: 000000
2011/09/19 13:06:32 2B0E74B0 c dvbapi: new program number: 158A (0B01:158A unknown)
2011/09/19 13:06:32 2AFE74B0 p connecting to serv5.zargacum.net
2011/09/19 13:06:33 2AFE74B0 p vip server blocked connection!
2011/09/19 13:06:33 2B0E74B0 c anonymous (0B01&000000/158A/67:97E6): rejected reader peer (9 ms) (of 1 avail 1)
2011/09/19 13:06:33 2AFE74B0 p vip connection blocked, retrying later
2011/09/19 13:06:33 2B0E74B0 c dvbapi: try pids again #1
2011/09/19 13:06:33 2B0E74B0 c anonymous (0D06&0000C0/158A/B4:5506): rejected reader peer (3 ms) (of 1 avail 1)
2011/09/19 13:06:38 2B0E74B0 c anonymous (0B01&000000/158A/67:97E6): timeout (5028 ms) (of 0 avail 0)

[дан4ик]

Стана бях изпуснал една буква от паролата.Получавам 2 линии от които гледам с cccam .може ли някои да помогне как се добавя втора линия при оскам

[radionov]

Стана бях изпуснал една буква от паролата.Получавам 2 линии от които гледам с cccam .може ли някои да помогне как се добавя втора линия при оскам

Колега както си написал първата линия в оскам сървар си добавяш по същия начин и втората и си ок.