Здравейте търся някой да ми ъпдейтне карта на сателайтбг
ето и линия 84.22.27.70 8888 User = ALFA Pwd = ALFA
ето и линия 84.22.27.70 8888 User = ALFA Pwd = ALFA
Разделът показва всички публикации, направени от този член. Имай предвид, че виждаш само публикациите, направени в раздели, до които имаш достъп.
Страници1
#2
Кошче / Проблем с разкодиране на канали
19-04-2011, 18:38
@itzko - успя ли да подкараш ъпдейта на картата със oscam-a, на последък нямам много врема да го ръчкам, ако си успял би ли споделил как.
#3
Кошче / Проблем с разкодиране на канали
17-04-2011, 23:22
Здравейте отново, след направените промени каналите все още не се отварят, предполагам защото не се е ъпдейтнала, каква може да е причината и как да разбера дали oscam-a прави опити за ъпдейт на картата?
Ето и лога:
2011/04/17 23:06:53 2AAC6850 s >> OSCam << cardserver started version 1.00-unstable_svn, build #4574 (mips-tuxbox-linux)
2011/04/17 23:06:53 2AAC6850 s version=1.00-unstable_svn, build #4574, system=mips-tuxbox-linux, nice=-1
2011/04/17 23:06:53 2AAC6850 s client max. idle=120 sec, debug level=0
2011/04/17 23:06:53 2AAC6850 s max. logsize=32 Kb
2011/04/17 23:06:53 2AAC6850 s client timeout=5000 ms, fallback timeout=2500 ms, cache delay=120 ms
2011/04/17 23:06:53 2AAC6850 s auth size=4976
2011/04/17 23:06:53 2AAC6850 s services reloaded: 0 services freed, 1 services loaded
2011/04/17 23:06:53 2AAC6850 s userdb reloaded: 1 accounts loaded, 0 expired, 0 disabled
2011/04/17 23:06:53 2AAC6850 s signal handling initialized (type=sysv)
2011/04/17 23:06:53 2AAC6850 s 37 service-id's loaded
2011/04/17 23:06:53 2AAC6850 s can't open file "/var/tuxbox/config/oscam.tiers" (err=2), no tier-id's loaded
2011/04/17 23:06:53 2AAC6850 s can't open file "/var/tuxbox/config/oscam.provid" (err=2), no provids's loaded
2011/04/17 23:06:53 2AAC6850 s can't open file "/var/tuxbox/config/oscam.ird" (errno=2) irdeto guessing not loaded
2011/04/17 23:06:53 2AAC6850 s monitor: initialized (fd=8, port=988)
2011/04/17 23:06:53 2AAC6850 s camd33: disabled
2011/04/17 23:06:53 2AAC6850 s camd35: disabled
2011/04/17 23:06:53 2AAC6850 s cs378x: disabled
2011/04/17 23:06:53 2AAC6850 s newcamd: disabled
2011/04/17 23:06:53 2AAC6850 s cccam: disabled
2011/04/17 23:06:53 2AAC6850 s radegast: disabled
2011/04/17 23:06:53 2AAC6850 s http thread started
2011/04/17 23:06:53 2AAC6850 s creating thread for device /dev/sci0
2011/04/17 23:06:53 2AAC6850 s loadbalancer: can't read from file /tmp/.oscam/stat
2011/04/17 23:06:53 2AAC6850 s waiting for local card init
2011/04/17 23:06:53 2AEFF4B0 h HTTP Server listening on port 8888
2011/04/17 23:06:53 2AFFF4B0 r reader thread started (thread=2AFFF4B0, label=satellitebg, device=/dev/sci0, detect=cd, mhz=500, cardmhz=357)
2011/04/17 23:06:53 2AFFF4B0 r satellitebg card detected
2011/04/17 23:06:54 2AFFF4B0 r ATR: 3B 34 94 00 30 42 30 30
2011/04/17 23:06:56 2AFFF4B0 r Maximum frequency for this card is formally 5 Mhz, clocking it to 5.00 Mhz
2011/04/17 23:06:57 2AFFF4B0 r type: Conax, caid: 0B01, serial: **********, hex serial: ********, card: v64
2011/04/17 23:06:57 2AFFF4B0 r Providers: 1
2011/04/17 23:06:57 2AFFF4B0 r Provider: 1 Provider-Id: 000000
2011/04/17 23:06:57 2AFFF4B0 r Provider: 1 SharedAddress: 00000000
2011/04/17 23:06:57 2AFFF4B0 r found cardsystem
2011/04/17 23:06:57 2AFFF4B0 r Package: 1, id: 1010, date: 2011/04/04 - 2011/04/09, name: Preview1
2011/04/17 23:06:57 2AFFF4B0 r [conax-reader] ready for requests
2011/04/17 23:06:57 2AAC6850 s init for all local cards done
2011/04/17 23:06:57 2AAC6850 s anti cascading disabled
2011/04/17 23:06:57 2B0FF4B0 c plain dvbapi-client granted (user, au=satellitebg)
2011/04/17 23:06:57 2B0FF4B0 c dvbapi: 1 entries read from oscam.dvbapi
2011/04/17 23:07:00 2B0FF4B0 c dvbapi: [ADD PID 0] CAID: 0D06 ECM_PID: 04FD PROVID: 000000
2011/04/17 23:07:00 2B0FF4B0 c dvbapi: [ADD PID 1] CAID: 0B01 ECM_PID: 0520 PROVID: 000000
2011/04/17 23:07:00 2B0FF4B0 c dvbapi: new program number: 151A (0D06:151A unknown)
2011/04/17 23:07:00 2B0FF4B0 c user (0B01&000000/151A/67:EBA3): not found (94 ms) (of 1 avail 1)
2011/04/17 23:07:01 2B0FF4B0 c dvbapi: try pids again #1
2011/04/17 23:07:01 2B0FF4B0 c user (0D06&0000C0/151A/B4:5680): rejected group (120 ms) (of 0 avail 0) (no matching reader)
2011/04/17 23:07:02 2B0FF4B0 c user (0B01&000000/151A/67:C63C): not found (88 ms) (of 1 avail 1)
2011/04/17 23:07:02 2B0FF4B0 c dvbapi: try pids again #2
2011/04/17 23:07:02 2B0FF4B0 c user (0D06&0000C0/151A/B4:2BBB): rejected group (120 ms) (of 0 avail 0) (no matching reader)
2011/04/17 23:07:06 2B0FF4B0 c user (0B01&000000/151A/67:EBA3): timeout (5031 ms) (of 0 avail 0)
2011/04/17 23:07:07 2B0FF4B0 c dvbapi: try pids again #3
2011/04/17 23:07:07 2B0FF4B0 c dvbapi: can't decode channel
2011/04/17 23:07:07 2B0FF4B0 c user (0B01&000000/151A/67:C63C): timeout (5025 ms) (of 0 avail 0)
2011/04/17 23:07:11 2B0FF4B0 c dvbapi: can't decode channel
2011/04/17 23:07:11 2B0FF4B0 c user (0D06&0000C0/151A/B4:2BBB): timeout (5095 ms) (of 0 avail 0)
2011/04/17 23:12:12 2B0FF4B0 c dvbapi: [ADD PID 0] CAID: 0D06 ECM_PID: 052D PROVID: 000000
2011/04/17 23:12:12 2B0FF4B0 c dvbapi: [ADD PID 1] CAID: 0B01 ECM_PID: 050A PROVID: 000000
2011/04/17 23:12:12 2B0FF4B0 c dvbapi: new program number: 1529 (0D06:1529 unknown)
2011/04/17 23:12:12 2B0FF4B0 c user (0B01&000000/1529/67:2D2B): rejected group (120 ms) (of 0 avail 0) (no matching reader)
2011/04/17 23:12:12 2B0FF4B0 c dvbapi: try pids again #1
2011/04/17 23:12:12 2B0FF4B0 c user (0D06&0000C0/1529/B4:062F): rejected group (120 ms) (of 0 avail 0) (no matching reader)
2011/04/17 23:12:16 2B0FF4B0 c user (0B01&000000/1529/67:3E3D): rejected group (120 ms) (of 0 avail 0) (no matching reader)
2011/04/17 23:12:17 2B0FF4B0 c dvbapi: try pids again #2
2011/04/17 23:12:17 2B0FF4B0 c user (0D06&0000C0/1529/B4:BAA3): rejected group (120 ms) (of 0 avail 0) (no matching reader)
2011/04/17 23:12:18 2B0FF4B0 c user (0B01&000000/1529/67:2D2B): timeout (5031 ms) (of 0 avail 0)
2011/04/17 23:12:22 2B0FF4B0 c dvbapi: try pids again #3
2011/04/17 23:12:22 2B0FF4B0 c dvbapi: can't decode channel
2011/04/17 23:12:22 2B0FF4B0 c user (0B01&000000/1529/67:3E3D): timeout (5031 ms) (of 0 avail 0)
2011/04/17 23:12:23 2B0FF4B0 c dvbapi: can't decode channel
2011/04/17 23:12:23 2B0FF4B0 c user (0D06&0000C0/1529/B4:BAA3): timeout (5043 ms) (of 0 avail 0)
2011/04/17 23:12:27 2B0FF4B0 c dvbapi: new program number: 1582 (0000:1582 unknown)
Ето и лога:
2011/04/17 23:06:53 2AAC6850 s >> OSCam << cardserver started version 1.00-unstable_svn, build #4574 (mips-tuxbox-linux)
2011/04/17 23:06:53 2AAC6850 s version=1.00-unstable_svn, build #4574, system=mips-tuxbox-linux, nice=-1
2011/04/17 23:06:53 2AAC6850 s client max. idle=120 sec, debug level=0
2011/04/17 23:06:53 2AAC6850 s max. logsize=32 Kb
2011/04/17 23:06:53 2AAC6850 s client timeout=5000 ms, fallback timeout=2500 ms, cache delay=120 ms
2011/04/17 23:06:53 2AAC6850 s auth size=4976
2011/04/17 23:06:53 2AAC6850 s services reloaded: 0 services freed, 1 services loaded
2011/04/17 23:06:53 2AAC6850 s userdb reloaded: 1 accounts loaded, 0 expired, 0 disabled
2011/04/17 23:06:53 2AAC6850 s signal handling initialized (type=sysv)
2011/04/17 23:06:53 2AAC6850 s 37 service-id's loaded
2011/04/17 23:06:53 2AAC6850 s can't open file "/var/tuxbox/config/oscam.tiers" (err=2), no tier-id's loaded
2011/04/17 23:06:53 2AAC6850 s can't open file "/var/tuxbox/config/oscam.provid" (err=2), no provids's loaded
2011/04/17 23:06:53 2AAC6850 s can't open file "/var/tuxbox/config/oscam.ird" (errno=2) irdeto guessing not loaded
2011/04/17 23:06:53 2AAC6850 s monitor: initialized (fd=8, port=988)
2011/04/17 23:06:53 2AAC6850 s camd33: disabled
2011/04/17 23:06:53 2AAC6850 s camd35: disabled
2011/04/17 23:06:53 2AAC6850 s cs378x: disabled
2011/04/17 23:06:53 2AAC6850 s newcamd: disabled
2011/04/17 23:06:53 2AAC6850 s cccam: disabled
2011/04/17 23:06:53 2AAC6850 s radegast: disabled
2011/04/17 23:06:53 2AAC6850 s http thread started
2011/04/17 23:06:53 2AAC6850 s creating thread for device /dev/sci0
2011/04/17 23:06:53 2AAC6850 s loadbalancer: can't read from file /tmp/.oscam/stat
2011/04/17 23:06:53 2AAC6850 s waiting for local card init
2011/04/17 23:06:53 2AEFF4B0 h HTTP Server listening on port 8888
2011/04/17 23:06:53 2AFFF4B0 r reader thread started (thread=2AFFF4B0, label=satellitebg, device=/dev/sci0, detect=cd, mhz=500, cardmhz=357)
2011/04/17 23:06:53 2AFFF4B0 r satellitebg card detected
2011/04/17 23:06:54 2AFFF4B0 r ATR: 3B 34 94 00 30 42 30 30
2011/04/17 23:06:56 2AFFF4B0 r Maximum frequency for this card is formally 5 Mhz, clocking it to 5.00 Mhz
2011/04/17 23:06:57 2AFFF4B0 r type: Conax, caid: 0B01, serial: **********, hex serial: ********, card: v64
2011/04/17 23:06:57 2AFFF4B0 r Providers: 1
2011/04/17 23:06:57 2AFFF4B0 r Provider: 1 Provider-Id: 000000
2011/04/17 23:06:57 2AFFF4B0 r Provider: 1 SharedAddress: 00000000
2011/04/17 23:06:57 2AFFF4B0 r found cardsystem
2011/04/17 23:06:57 2AFFF4B0 r Package: 1, id: 1010, date: 2011/04/04 - 2011/04/09, name: Preview1
2011/04/17 23:06:57 2AFFF4B0 r [conax-reader] ready for requests
2011/04/17 23:06:57 2AAC6850 s init for all local cards done
2011/04/17 23:06:57 2AAC6850 s anti cascading disabled
2011/04/17 23:06:57 2B0FF4B0 c plain dvbapi-client granted (user, au=satellitebg)
2011/04/17 23:06:57 2B0FF4B0 c dvbapi: 1 entries read from oscam.dvbapi
2011/04/17 23:07:00 2B0FF4B0 c dvbapi: [ADD PID 0] CAID: 0D06 ECM_PID: 04FD PROVID: 000000
2011/04/17 23:07:00 2B0FF4B0 c dvbapi: [ADD PID 1] CAID: 0B01 ECM_PID: 0520 PROVID: 000000
2011/04/17 23:07:00 2B0FF4B0 c dvbapi: new program number: 151A (0D06:151A unknown)
2011/04/17 23:07:00 2B0FF4B0 c user (0B01&000000/151A/67:EBA3): not found (94 ms) (of 1 avail 1)
2011/04/17 23:07:01 2B0FF4B0 c dvbapi: try pids again #1
2011/04/17 23:07:01 2B0FF4B0 c user (0D06&0000C0/151A/B4:5680): rejected group (120 ms) (of 0 avail 0) (no matching reader)
2011/04/17 23:07:02 2B0FF4B0 c user (0B01&000000/151A/67:C63C): not found (88 ms) (of 1 avail 1)
2011/04/17 23:07:02 2B0FF4B0 c dvbapi: try pids again #2
2011/04/17 23:07:02 2B0FF4B0 c user (0D06&0000C0/151A/B4:2BBB): rejected group (120 ms) (of 0 avail 0) (no matching reader)
2011/04/17 23:07:06 2B0FF4B0 c user (0B01&000000/151A/67:EBA3): timeout (5031 ms) (of 0 avail 0)
2011/04/17 23:07:07 2B0FF4B0 c dvbapi: try pids again #3
2011/04/17 23:07:07 2B0FF4B0 c dvbapi: can't decode channel
2011/04/17 23:07:07 2B0FF4B0 c user (0B01&000000/151A/67:C63C): timeout (5025 ms) (of 0 avail 0)
2011/04/17 23:07:11 2B0FF4B0 c dvbapi: can't decode channel
2011/04/17 23:07:11 2B0FF4B0 c user (0D06&0000C0/151A/B4:2BBB): timeout (5095 ms) (of 0 avail 0)
2011/04/17 23:12:12 2B0FF4B0 c dvbapi: [ADD PID 0] CAID: 0D06 ECM_PID: 052D PROVID: 000000
2011/04/17 23:12:12 2B0FF4B0 c dvbapi: [ADD PID 1] CAID: 0B01 ECM_PID: 050A PROVID: 000000
2011/04/17 23:12:12 2B0FF4B0 c dvbapi: new program number: 1529 (0D06:1529 unknown)
2011/04/17 23:12:12 2B0FF4B0 c user (0B01&000000/1529/67:2D2B): rejected group (120 ms) (of 0 avail 0) (no matching reader)
2011/04/17 23:12:12 2B0FF4B0 c dvbapi: try pids again #1
2011/04/17 23:12:12 2B0FF4B0 c user (0D06&0000C0/1529/B4:062F): rejected group (120 ms) (of 0 avail 0) (no matching reader)
2011/04/17 23:12:16 2B0FF4B0 c user (0B01&000000/1529/67:3E3D): rejected group (120 ms) (of 0 avail 0) (no matching reader)
2011/04/17 23:12:17 2B0FF4B0 c dvbapi: try pids again #2
2011/04/17 23:12:17 2B0FF4B0 c user (0D06&0000C0/1529/B4:BAA3): rejected group (120 ms) (of 0 avail 0) (no matching reader)
2011/04/17 23:12:18 2B0FF4B0 c user (0B01&000000/1529/67:2D2B): timeout (5031 ms) (of 0 avail 0)
2011/04/17 23:12:22 2B0FF4B0 c dvbapi: try pids again #3
2011/04/17 23:12:22 2B0FF4B0 c dvbapi: can't decode channel
2011/04/17 23:12:22 2B0FF4B0 c user (0B01&000000/1529/67:3E3D): timeout (5031 ms) (of 0 avail 0)
2011/04/17 23:12:23 2B0FF4B0 c dvbapi: can't decode channel
2011/04/17 23:12:23 2B0FF4B0 c user (0D06&0000C0/1529/B4:BAA3): timeout (5043 ms) (of 0 avail 0)
2011/04/17 23:12:27 2B0FF4B0 c dvbapi: new program number: 1582 (0000:1582 unknown)
#4
Кошче / Проблем с разкодиране на канали
17-04-2011, 11:37
благодаря за съветите, ще коригирам, а относно версията на oscam коя е стабилна и от къде да я изтегля, защото от стотиците версий незная тази която съм инсталирал дали е читава, а тя е oscam version 1.00-unstable_svn, build #4574 ,и още веднъж благодаря за бързите отговори.
#5
Кошче / Проблем с разкодиране на канали
16-04-2011, 22:58
Здравейте, пробвах какво ли не, но каналите не се отварят и картата не иска да се ъпдейнте започвам да се съмнявам във версията на oscam. Приемника ми е DM500 HD с Enigma2 и Gemini 5.1. Ако някои е подкарал такава карта то със коя версия на oscam е станало и от къде я е изтеглил?
Иначе ето с какво се опитвам да я подкарам:
oscam.conf
[global]
nice=-1
logfile=/tmp/oscam.log
disablelog=0
disableuserfile=1
maxlogsize=32
waitforcards=1
saveinithistory = 1
preferlocalcards=1
cachedelay=120
[monitor]
port = 988
aulow = 120
monlevel = 4
nocrypt = 127.0.0.1,192.168.1.1-192.168.1.255
[webif]
httpport=8888
httpallowed=127.0.0.1,192.168.1.1-192.168.1.255
[dvbapi]
enabled=1
boxtype=dreambox
user=user
au=1
ignore = 0d06:000000
priority = 0B01:000000
oscam.user
[account]
user = user
group = 1
uniq = 0
au= satellitebg
monlevel = 4
keepalive = 1
oscam.dvbapi
P: 0B01:000000
I: 0d06:000000
оscam.server
[reader]
label = satellitebg
enable = 1
protocol = internal
device = /dev/sci1
pincode = 0000
services = SatelliteBG
fallback = 1
caid = 0b01
detect = cd
mhz = 500
cardmhz = 357
ident = 0b01:000000
group = 1
emmcache = 1,3,2
lb_weight = 100
Иначе ето с какво се опитвам да я подкарам:
oscam.conf
[global]
nice=-1
logfile=/tmp/oscam.log
disablelog=0
disableuserfile=1
maxlogsize=32
waitforcards=1
saveinithistory = 1
preferlocalcards=1
cachedelay=120
[monitor]
port = 988
aulow = 120
monlevel = 4
nocrypt = 127.0.0.1,192.168.1.1-192.168.1.255
[webif]
httpport=8888
httpallowed=127.0.0.1,192.168.1.1-192.168.1.255
[dvbapi]
enabled=1
boxtype=dreambox
user=user
au=1
ignore = 0d06:000000
priority = 0B01:000000
oscam.user
[account]
user = user
group = 1
uniq = 0
au= satellitebg
monlevel = 4
keepalive = 1
oscam.dvbapi
P: 0B01:000000
I: 0d06:000000
оscam.server
[reader]
label = satellitebg
enable = 1
protocol = internal
device = /dev/sci1
pincode = 0000
services = SatelliteBG
fallback = 1
caid = 0b01
detect = cd
mhz = 500
cardmhz = 357
ident = 0b01:000000
group = 1
emmcache = 1,3,2
lb_weight = 100
#6
Кошче / Проблем с разкодиране на канали
13-04-2011, 01:17
Здравейте, взех си карта Conax на Satellitebg и не ми разкодира каналите, къде да търся проблема?
Ето лога на oscam-a:
2011/04/13 0:54:04 2AAC6850 s >> OSCam << cardserver started version 1.00-unstable_svn, build #4574 (mips-tuxbox-linux)
2011/04/13 0:54:04 2AAC6850 s version=1.00-unstable_svn, build #4574, system=mips-tuxbox-linux, nice=-1
2011/04/13 0:54:04 2AAC6850 s client max. idle=120 sec, debug level=0
2011/04/13 0:54:04 2AAC6850 s max. logsize=32 Kb
2011/04/13 0:54:04 2AAC6850 s client timeout=5000 ms, fallback timeout=2500 ms, cache delay=120 ms
2011/04/13 0:54:04 2AAC6850 s auth size=4976
2011/04/13 0:54:04 2AAC6850 s services reloaded: 0 services freed, 1 services loaded
2011/04/13 0:54:04 2AAC6850 s userdb reloaded: 1 accounts loaded, 0 expired, 0 disabled
2011/04/13 0:54:04 2AAC6850 s signal handling initialized (type=sysv)
2011/04/13 0:54:04 2AAC6850 s 37 service-id's loaded
2011/04/13 0:54:04 2AAC6850 s can't open file "/var/tuxbox/config/oscam.tiers" (err=2), no tier-id's loaded
2011/04/13 0:54:04 2AAC6850 s can't open file "/var/tuxbox/config/oscam.provid" (err=2), no provids's loaded
2011/04/13 0:54:04 2AAC6850 s can't open file "/var/tuxbox/config/oscam.ird" (errno=2) irdeto guessing not loaded
2011/04/13 0:54:04 2AAC6850 s monitor: initialized (fd=8, port=988)
2011/04/13 0:54:04 2AAC6850 s camd33: disabled
2011/04/13 0:54:04 2AAC6850 s camd35: disabled
2011/04/13 0:54:04 2AAC6850 s cs378x: disabled
2011/04/13 0:54:04 2AAC6850 s newcamd: disabled
2011/04/13 0:54:04 2AAC6850 s cccam: disabled
2011/04/13 0:54:04 2AAC6850 s radegast: disabled
2011/04/13 0:54:04 2AAC6850 s http thread started
2011/04/13 0:54:04 2AAC6850 s creating thread for device /dev/sci0
2011/04/13 0:54:04 2AAC6850 s loadbalancer: can't read from file /tmp/.oscam/stat
2011/04/13 0:54:04 2AAC6850 s waiting for local card init
2011/04/13 0:54:04 2AEFF4B0 h HTTP Server listening on port 8888
2011/04/13 0:54:04 2AFFF4B0 r reader thread started (thread=2AFFF4B0, label=satellitebg, device=/dev/sci0, detect=cd, mhz=500, cardmhz=357)
2011/04/13 0:54:04 2AFFF4B0 r satellitebg card detected
2011/04/13 0:54:05 2AFFF4B0 r ATR: 3B 34 94 00 30 42 30 30
2011/04/13 0:54:07 2AFFF4B0 r Maximum frequency for this card is formally 5 Mhz, clocking it to 5.00 Mhz
2011/04/13 0:54:08 2AFFF4B0 r type: Conax, caid: 0B01, serial: ХХХХХХХХХХ, hex serial: ХХХХХХХ, card: v64
2011/04/13 0:54:08 2AFFF4B0 r Providers: 1
2011/04/13 0:54:08 2AFFF4B0 r Provider: 1 Provider-Id: 000000
2011/04/13 0:54:08 2AFFF4B0 r Provider: 1 SharedAddress: 00000000
2011/04/13 0:54:08 2AFFF4B0 r found cardsystem
2011/04/13 0:54:08 2AFFF4B0 r Package: 1, id: 1010, date: 2011/04/04 - 2011/04/09, name: Preview1
2011/04/13 0:54:08 2AFFF4B0 r [conax-reader] ready for requests
2011/04/13 0:54:08 2AAC6850 s init for all local cards done
2011/04/13 0:54:08 2AAC6850 s anti cascading disabled
2011/04/13 0:54:08 2B0FF4B0 c plain dvbapi-client granted (user, au=satellitebg)
2011/04/13 0:54:08 2B0FF4B0 c dvbapi: reread priority file oscam.dvbapi
2011/04/13 0:54:08 2B0FF4B0 c dvbapi: 2 entries read from oscam.dvbapi
2011/04/13 0:54:12 2B0FF4B0 c dvbapi: [ADD PID 0] CAID: 0D06 ECM_PID: 0513 PROVID: 000000
2011/04/13 0:54:12 2B0FF4B0 c dvbapi: [ADD PID 1] CAID: 0B01 ECM_PID: 0522 PROVID: 000000
2011/04/13 0:54:12 2B0FF4B0 c dvbapi: new program number: 1522 (0D06:1522 unknown)
2011/04/13 0:54:12 2B0FF4B0 c dvbapi: try pids again #1
2011/04/13 0:54:12 2B0FF4B0 c user (0B01&000000/1522/67:1CAC): not found (94 ms) (of 1 avail 1)
2011/04/13 0:54:12 2B0FF4B0 c dvbapi: try pids again #2
2011/04/13 0:54:12 2B0FF4B0 c user (0B01&000000/1522/67:E401): not found (85 ms) (of 1 avail 1)
Ето лога на oscam-a:
2011/04/13 0:54:04 2AAC6850 s >> OSCam << cardserver started version 1.00-unstable_svn, build #4574 (mips-tuxbox-linux)
2011/04/13 0:54:04 2AAC6850 s version=1.00-unstable_svn, build #4574, system=mips-tuxbox-linux, nice=-1
2011/04/13 0:54:04 2AAC6850 s client max. idle=120 sec, debug level=0
2011/04/13 0:54:04 2AAC6850 s max. logsize=32 Kb
2011/04/13 0:54:04 2AAC6850 s client timeout=5000 ms, fallback timeout=2500 ms, cache delay=120 ms
2011/04/13 0:54:04 2AAC6850 s auth size=4976
2011/04/13 0:54:04 2AAC6850 s services reloaded: 0 services freed, 1 services loaded
2011/04/13 0:54:04 2AAC6850 s userdb reloaded: 1 accounts loaded, 0 expired, 0 disabled
2011/04/13 0:54:04 2AAC6850 s signal handling initialized (type=sysv)
2011/04/13 0:54:04 2AAC6850 s 37 service-id's loaded
2011/04/13 0:54:04 2AAC6850 s can't open file "/var/tuxbox/config/oscam.tiers" (err=2), no tier-id's loaded
2011/04/13 0:54:04 2AAC6850 s can't open file "/var/tuxbox/config/oscam.provid" (err=2), no provids's loaded
2011/04/13 0:54:04 2AAC6850 s can't open file "/var/tuxbox/config/oscam.ird" (errno=2) irdeto guessing not loaded
2011/04/13 0:54:04 2AAC6850 s monitor: initialized (fd=8, port=988)
2011/04/13 0:54:04 2AAC6850 s camd33: disabled
2011/04/13 0:54:04 2AAC6850 s camd35: disabled
2011/04/13 0:54:04 2AAC6850 s cs378x: disabled
2011/04/13 0:54:04 2AAC6850 s newcamd: disabled
2011/04/13 0:54:04 2AAC6850 s cccam: disabled
2011/04/13 0:54:04 2AAC6850 s radegast: disabled
2011/04/13 0:54:04 2AAC6850 s http thread started
2011/04/13 0:54:04 2AAC6850 s creating thread for device /dev/sci0
2011/04/13 0:54:04 2AAC6850 s loadbalancer: can't read from file /tmp/.oscam/stat
2011/04/13 0:54:04 2AAC6850 s waiting for local card init
2011/04/13 0:54:04 2AEFF4B0 h HTTP Server listening on port 8888
2011/04/13 0:54:04 2AFFF4B0 r reader thread started (thread=2AFFF4B0, label=satellitebg, device=/dev/sci0, detect=cd, mhz=500, cardmhz=357)
2011/04/13 0:54:04 2AFFF4B0 r satellitebg card detected
2011/04/13 0:54:05 2AFFF4B0 r ATR: 3B 34 94 00 30 42 30 30
2011/04/13 0:54:07 2AFFF4B0 r Maximum frequency for this card is formally 5 Mhz, clocking it to 5.00 Mhz
2011/04/13 0:54:08 2AFFF4B0 r type: Conax, caid: 0B01, serial: ХХХХХХХХХХ, hex serial: ХХХХХХХ, card: v64
2011/04/13 0:54:08 2AFFF4B0 r Providers: 1
2011/04/13 0:54:08 2AFFF4B0 r Provider: 1 Provider-Id: 000000
2011/04/13 0:54:08 2AFFF4B0 r Provider: 1 SharedAddress: 00000000
2011/04/13 0:54:08 2AFFF4B0 r found cardsystem
2011/04/13 0:54:08 2AFFF4B0 r Package: 1, id: 1010, date: 2011/04/04 - 2011/04/09, name: Preview1
2011/04/13 0:54:08 2AFFF4B0 r [conax-reader] ready for requests
2011/04/13 0:54:08 2AAC6850 s init for all local cards done
2011/04/13 0:54:08 2AAC6850 s anti cascading disabled
2011/04/13 0:54:08 2B0FF4B0 c plain dvbapi-client granted (user, au=satellitebg)
2011/04/13 0:54:08 2B0FF4B0 c dvbapi: reread priority file oscam.dvbapi
2011/04/13 0:54:08 2B0FF4B0 c dvbapi: 2 entries read from oscam.dvbapi
2011/04/13 0:54:12 2B0FF4B0 c dvbapi: [ADD PID 0] CAID: 0D06 ECM_PID: 0513 PROVID: 000000
2011/04/13 0:54:12 2B0FF4B0 c dvbapi: [ADD PID 1] CAID: 0B01 ECM_PID: 0522 PROVID: 000000
2011/04/13 0:54:12 2B0FF4B0 c dvbapi: new program number: 1522 (0D06:1522 unknown)
2011/04/13 0:54:12 2B0FF4B0 c dvbapi: try pids again #1
2011/04/13 0:54:12 2B0FF4B0 c user (0B01&000000/1522/67:1CAC): not found (94 ms) (of 1 avail 1)
2011/04/13 0:54:12 2B0FF4B0 c dvbapi: try pids again #2
2011/04/13 0:54:12 2B0FF4B0 c user (0B01&000000/1522/67:E401): not found (85 ms) (of 1 avail 1)
#7
DREAMBOX / Проблем със субтитри
14-12-2010, 14:56
във аудио/видео настройките също няма настройки за субтитри
#8
DREAMBOX / Проблем със субтитри
14-12-2010, 01:03
Здравейте, на MD500HD в главното меню няма опция за субтитри на какво се дължи това, приемника е със enigma и gemini 5.1.
Страници1
