От 2 дни не може да ми се включи oscam-а
с DM500S съм с GEMINI4.7
CCCam 2.0.11 и Oscam 1.00 Version 5507
снощи го преинсталирах и заработи но днес отново го няма
за момент се показва webinfo но после изчезва
трябва да изключа приемника от тока за да тръгне пак
с конакс карта на Satellitbg съм
ако ви трябват файловете ще ви ги постна н.п.
сменях портове ъпдейтвах хоста но все тази само снощи след преинстал на cccam и oscam запали но днес отново го няма
ето ви лога при включване на oscam
1970/01/01 2:00:21 30016880 s >> OSCam << cardserver started, version 1.10rc-svn, build #5708 (powerpc-tuxbox-linux)
1970/01/01 2:00:21 30016880 s version=1.10rc-svn, build #5708, system=powerpc-tuxbox-linux, nice=-1
1970/01/01 2:00:21 30016880 s client max. idle=120 sec, debug level=0
1970/01/01 2:00:21 30016880 s max. logsize=10 Kb, loghistorysize=4096 bytes
1970/01/01 2:00:21 30016880 s client timeout=5000 ms, fallback timeout=1600 ms, cache delay=120 ms
1970/01/01 2:00:21 30016880 s The current system time is smaller than the build date (Jul 23 2011). Waiting 5s for time to correct...
1970/01/01 2:00:26 30016880 s The current system time is smaller than the build date (Jul 23 2011). Waiting 5s for time to correct...
1970/01/01 2:00:31 30016880 s The current system time is smaller than the build date (Jul 23 2011). Waiting 5s for time to correct...
1970/01/01 2:00:36 30016880 s The current system time is smaller than the build date (Jul 23 2011). Waiting 5s for time to correct...
1970/01/01 2:00:41 30016880 s The current system time is smaller than the build date (Jul 23 2011). Waiting 5s for time to correct...
2011/07/27 16:05:06 30016880 s services reloaded: 0 services freed, 0 services loaded, rejected 0
2011/07/27 16:05:06 30016880 s userdb reloaded: 1 accounts loaded, 0 expired, 0 disabled
2011/07/27 16:05:06 30016880 s signal handling initialized (type=sysv)
2011/07/27 16:05:06 30016880 s 356 service-id's loaded in 20ms
2011/07/27 16:05:06 30016880 s can't open file "/var/tuxbox/config/oscam.tiers" (err=2 No such file or directory), no tier-id's loaded
2011/07/27 16:05:06 30016880 s can't open file "/var/tuxbox/config/oscam.provid" (err=2 No such file or directory), no provids's loaded
2011/07/27 16:05:06 30016880 s 0 lengths for caid guessing loaded
2011/07/27 16:05:06 30016880 s monitor: disabled
2011/07/27 16:05:06 30016880 s camd33: disabled
2011/07/27 16:05:06 30016880 s camd35: initialized (fd=8, port=14000)
2011/07/27 16:05:06 30016880 s cs378x: disabled
2011/07/27 16:05:06 30016880 s newcamd: initialized (fd=9, port=7777, crypted)
2011/07/27 16:05:06 30016880 s CAID: 0B01
2011/07/27 16:05:06 30016880 s provid #0: 000000
2011/07/27 16:05:06 30016880 s radegast: disabled
2011/07/27 16:05:06 30016880 s http thread started
2011/07/27 16:05:06 30016880 s creating thread for device /dev/sci0
2011/07/27 16:05:06 30016880 s loadbalancer: can't read from file /tmp/.oscam/stat
2011/07/27 16:05:06 30016880 s waiting for local card init
2011/07/27 16:05:06 31025B50 h HTTP Server listening on port 11200
2011/07/27 16:05:06 31825B50 r reader thread started (thread=31825B50, label=satbg, device=/dev/sci0, detect=cd, mhz=357, cardmhz=357)
2011/07/27 16:05:06 31825B50 r ERROR opening device /dev/sci0
2011/07/27 16:05:06 31825B50 r Cannot open device: /dev/sci0
2011/07/27 16:06:06 31825B50 r ERROR opening device /dev/sci0
2011/07/27 16:06:06 31825B50 r Cannot open device: /dev/sci0
Я постни конфига и рийдър файловете
[global]
disablelog = 1
logfile = /tmp/oscam.log
disableuserfile = 1
usrfileflag = 0
fallbacktimeout = 1600
cachedelay = 120
waitforcards = 1
netprio = 0
nice = -1
preferlocalcards = 1
lb_mode = 1
lb_save = 100
saveinithistory = 1
[newcamd]
port = xxxx@0b01:000000
key = 0102030405060708091011121314
allowed =
keepalive = 1
mgclient = 0
[webif]
httpport = xxxxx
httprefresh = 20
httpallowed = 127.0.0.1,192.168.1.1-192.168.1.150
[reader]
label = satellitebg
enable = 1
protocol = internal
device = /dev/sci0
pincode = 0000
services = satellitebg
caid = 0b01
detect = cd
ident = 0b01:000000
mhz = 357
cardmhz = 357
group = 1
emmcache = 1,3,2
lb_weight = 100
Цитат на: Жоро;111397От 2 дни не може да ми се включи oscam-а
с DM500S съм с GEMINI4.7
CCCam 2.0.11 и Oscam 1.00 Version 5507
снощи го преинсталирах и заработи но днес отново го няма
за момент се показва webinfo но после изчезва
трябва да изключа приемника от тока за да тръгне пак
с конакс карта на Satellitbg съм
ако ви трябват файловете ще ви ги постна н.п.
сменях портове ъпдейтвах хоста но все тази само снощи след преинстал на cccam и oscam запали но днес отново го няма
ето ви лога при включване на oscam
1970/01/01 2:00:21 30016880 s >> OSCam << cardserver started, version 1.10rc-svn, build #5708 (powerpc-tuxbox-linux)
1970/01/01 2:00:21 30016880 s version=1.10rc-svn, build #5708, system=powerpc-tuxbox-linux, nice=-1
1970/01/01 2:00:21 30016880 s client max. idle=120 sec, debug level=0
1970/01/01 2:00:21 30016880 s max. logsize=10 Kb, loghistorysize=4096 bytes
1970/01/01 2:00:21 30016880 s client timeout=5000 ms, fallback timeout=1600 ms, cache delay=120 ms
1970/01/01 2:00:21 30016880 s The current system time is smaller than the build date (Jul 23 2011). Waiting 5s for time to correct...
1970/01/01 2:00:26 30016880 s The current system time is smaller than the build date (Jul 23 2011). Waiting 5s for time to correct...
1970/01/01 2:00:31 30016880 s The current system time is smaller than the build date (Jul 23 2011). Waiting 5s for time to correct...
1970/01/01 2:00:36 30016880 s The current system time is smaller than the build date (Jul 23 2011). Waiting 5s for time to correct...
1970/01/01 2:00:41 30016880 s The current system time is smaller than the build date (Jul 23 2011). Waiting 5s for time to correct...
2011/07/27 16:05:06 30016880 s services reloaded: 0 services freed, 0 services loaded, rejected 0
2011/07/27 16:05:06 30016880 s userdb reloaded: 1 accounts loaded, 0 expired, 0 disabled
2011/07/27 16:05:06 30016880 s signal handling initialized (type=sysv)
2011/07/27 16:05:06 30016880 s 356 service-id's loaded in 20ms
2011/07/27 16:05:06 30016880 s can't open file "/var/tuxbox/config/oscam.tiers" (err=2 No such file or directory), no tier-id's loaded
2011/07/27 16:05:06 30016880 s can't open file "/var/tuxbox/config/oscam.provid" (err=2 No such file or directory), no provids's loaded
2011/07/27 16:05:06 30016880 s 0 lengths for caid guessing loaded
2011/07/27 16:05:06 30016880 s monitor: disabled
2011/07/27 16:05:06 30016880 s camd33: disabled
2011/07/27 16:05:06 30016880 s camd35: initialized (fd=8, port=14000)
2011/07/27 16:05:06 30016880 s cs378x: disabled
2011/07/27 16:05:06 30016880 s newcamd: initialized (fd=9, port=7777, crypted)
2011/07/27 16:05:06 30016880 s CAID: 0B01
2011/07/27 16:05:06 30016880 s provid #0: 000000
2011/07/27 16:05:06 30016880 s radegast: disabled
2011/07/27 16:05:06 30016880 s http thread started
2011/07/27 16:05:06 30016880 s creating thread for device /dev/sci0
2011/07/27 16:05:06 30016880 s loadbalancer: can't read from file /tmp/.oscam/stat
2011/07/27 16:05:06 30016880 s waiting for local card init
2011/07/27 16:05:06 31025B50 h HTTP Server listening on port 11200
2011/07/27 16:05:06 31825B50 r reader thread started (thread=31825B50, label=satbg, device=/dev/sci0, detect=cd, mhz=357, cardmhz=357)
2011/07/27 16:05:06 31825B50 r ERROR opening device /dev/sci0
2011/07/27 16:05:06 31825B50 r Cannot open device: /dev/sci0
2011/07/27 16:06:06 31825B50 r ERROR opening device /dev/sci0
2011/07/27 16:06:06 31825B50 r Cannot open device: /dev/sci0
Случайно и цц-кама да не би да се опитва да чете картата СЪЩО ?
Цитат на: бебезавър;111401Случайно и цц-кама да не би да се опитва да чете картата СЪЩО ?
имам четец и в ццкама ама досега ни ми е правил проблем
Е двата едновременно няма как да четат от една карта, махай редовете от ССсама
четеца го махнах
ето това е в cccam.cfg
#SERVER LISTEN PORT :xxxxx
ALLOW WEBINFO : yes
SHOW TIMING : yes
WEBINFO LISTEN PORT : xxxx
WEBINFO USERNAME : root
WEBINFO PASSWORD : dreambox
DISABLE EMM : no
#EXTRA EMM LEVEL : yes
#TELNETINFO USERNAME :
#TELNETINFO PASSWORD :
#SERIAL READER : /dev/tts/0
#SMARTCARD WRITE DELAY: /dev/ttyUSB0 10000
#SMARTCARD WRITE DELAY: /dev/sci0 10000
#SMARTCARD WRITE DELAY: /dev/tts/0_7 8000
#SMARTCARD CLOCK FREQUENCY: /dev/ttyUSB0 5500000
SMARTCARD SID ASSIGN: yes
SMARTCARD CLOCK FREQUENCY: /dev/sci0 8200000
НО ПАК Е СЪЩОТО
последните 2 реда също и рестартирай бокса
Цитат на: hitman;111408последните 2 реда също и рестартирай бокса
не не е и това причината
:s102
да не е от конфингите на oscam
Аз съм със същия проблем и съм без карта.Бех със Gemini, сложих Open Pli и пак същата работа.Инфото заработва след 3 тия да кажем рестарт на бокса.
ето в момента като влезна в инфото ми изписва само това
2011/07/27 16:53:09 31825B50 r ERROR opening device /dev/sci0
2011/07/27 16:53:09 31825B50 r Cannot open device: /dev/sci0
2011/07/27 16:54:09 31825B50 r ERROR opening device /dev/sci0
2011/07/27 16:54:09 31825B50 r Cannot open device: /dev/sci0
2011/07/27 16:55:09 31825B50 r ERROR opening device /dev/sci0
......................................
Стартирай ръчно през телнет, първо оскама и после ккакам и виж дали пак ще крашне.
Цитат на: Жоро;111415ето в момента като влезна в инфото ми изписва само това
2011/07/27 16:53:09 31825B50 r ERROR opening device /dev/sci0
2011/07/27 16:53:09 31825B50 r Cannot open device: /dev/sci0
2011/07/27 16:54:09 31825B50 r ERROR opening device /dev/sci0
2011/07/27 16:54:09 31825B50 r Cannot open device: /dev/sci0
2011/07/27 16:55:09 31825B50 r ERROR opening device /dev/sci0
......................................
Това означава че нещо ползва четеца, тоест кккама.
Цитат на: Георги1;111416Стартирай ръчно през телнет, първо оскама и после ккакам и виж дали пак ще крашне.
Това означава че нещо ползва четеца, тоест кккама.
командата за oscam нали беше
/var/bin/oscam-6
или бъркам
а за ццкам
Цитат на: Жоро;111418командата за oscam нали беше
/var/bin/oscam-6
или бъркам
а за ццкам
Я влез в /var/script и дай съдържанието на този файл CCcam_2.2.1_oscam_1.00_cam.sh при теб може леко да се разминава името.
Цитат на: Георги1;111421Я влез в /var/script и дай съдържанието на този файл CCcam_2.2.1_oscam_1.00_cam.sh при теб може леко да се разминава името.
case "$1" in
start)
echo "[SCRIPT] $1: $CAMNAME"
remove_tmp
/var/bin/oscam_1.00 &
sleep 15
/var/bin/CCcam_2.0.11 &
;;
stop)
echo "[SCRIPT] $1: $CAMNAME"
kill `pidof oscam_1.00 `
killall oscam_1.00 CCcam_2.0.11 2>/dev/null
sleep 2
remove_tmp
;;
*)
$0 stop
exit 0
;;
esac
exit 0
Скрипта си е правилен първо си стартира оскама и после кккама.
но в telnet под "TOP" работи само cccam а oscam не се вижда
Цитат на: Жоро;111428но в telnet под "TOP" работи само cccam а oscam не се вижда
Там е ама се показва по рядко.
Пробвай с команда ps
след рестарт на дриима се появява но само инфото работи
но там няма нищо
Жоро, както снощи ти казах, вероятно ццкам-а ти взема четеца преди оскам и това е проблема. Ццкам си вземе четеца по подразбиране, без значение дали има редове за активирането му в конфига.
Пробвай да забраниш на ццкам да взема четеца с тази настройка:
SERIAL READER : /dev/nullА в стартовия скрипт, кажи на ццкам да се стартира с по-голямо закъснение, примерно 50 секунди след оскам, вместо сегашните 15
промени sleep 15 на sleep 50
Помени и самата команда за стартиране, задай я в този вид:
/var/bin/oscam_1.00 -b
значи до сега пробвах различни версии на oscam
но не става
дори инфото не винаги след рестарт се появява
Пробвай да стартираш само оскам без цц да видим дали пак ще ти дава грешка при достъпа до /dev/sci0
При мен винаги когато активирам cccam reader + dvbapi като клиент и оскама става изключително лаком за виртуална памет! След рестарт на емулатора се почва с около 20мб ползван суоп и след два часа работа вече е над 50мб и енигмата влачи от време на време. Това се харчи само от оскама! Найса си е както обикновено -1, а при нюкамд рийдър гладът за памет липсва.
Та мисълта ми е да не би това да е причината за постоянните проблеми при комбинацията оскам+cccam?
помагайте инсталирах oskam 1.00 svn 4574 на dm800 hd но не мога да го подкарам като клиент на сървар ето лог файл:>> OSCam << cardserver started at Sun Sep 18 22:16:03 2011
-------------------------------------------------------------------------------
2011/09/18 22:16:03 2AAC6850 s >> OSCam << cardserver started version 1.00-unstable_svn, build #4574 (mips-tuxbox-linux)
2011/09/18 22:16:03 2AAC6850 s version=1.00-unstable_svn, build #4574, system=mips-tuxbox-linux, nice=-1
2011/09/18 22:16:03 2AAC6850 s client max. idle=9999999 sec, debug level=0
2011/09/18 22:16:03 2AAC6850 s max. logsize=500 Kb
2011/09/18 22:16:03 2AAC6850 s client timeout=5000 ms, fallback timeout=2500 ms, cache delay=0 ms
2011/09/18 22:16:03 2AAC6850 s auth size=4976
2011/09/18 22:16:03 2AAC6850 s Cannot open file "/var/tuxbox/config/oscam.services" (errno=2)
2011/09/18 22:16:03 2AAC6850 s userdb reloaded: 1 accounts loaded, 0 expired, 0 disabled
2011/09/18 22:16:03 2AAC6850 s signal handling initialized (type=sysv)
2011/09/18 22:16:03 2AAC6850 s can't open file "/var/tuxbox/config/oscam.srvid" (err=2), no service-id's loaded
2011/09/18 22:16:03 2AAC6850 s can't open file "/var/tuxbox/config/oscam.tiers" (err=2), no tier-id's loaded
2011/09/18 22:16:03 2AAC6850 s can't open file "/var/tuxbox/config/oscam.provid" (err=2), no provids's loaded
2011/09/18 22:16:03 2AAC6850 s can't open file "/var/tuxbox/config/oscam.ird" (errno=2) irdeto guessing not loaded
2011/09/18 22:16:03 2AAC6850 s monitor: disabled
2011/09/18 22:16:03 2AAC6850 s camd33: disabled
2011/09/18 22:16:03 2AAC6850 s camd35: disabled
2011/09/18 22:16:03 2AAC6850 s cs378x: disabled
2011/09/18 22:16:03 2AAC6850 s newcamd: disabled
2011/09/18 22:16:03 2AAC6850 s cccam: disabled
2011/09/18 22:16:03 2AAC6850 s radegast: disabled
2011/09/18 22:16:03 2AAC6850 s http thread started
2011/09/18 22:16:03 2AAC6850 s creating thread for device serv5.zargacum.net
2011/09/18 22:16:03 2AEE74B0 h HTTP Server listening on port 8888
2011/09/18 22:16:03 2AFE74B0 p proxy thread started (thread=2AFE74B0, label=vip, server=serv5.zargacum.net)
2011/09/18 22:16:03 2AFE74B0 p connecting to serv5.zargacum.net
2011/09/18 22:16:03 2AAC6850 s loadbalancer: can't read from file /tmp/.oscam/stat
2011/09/18 22:16:03 2AAC6850 s waiting for local card init
2011/09/18 22:16:03 2AAC6850 s init for all local cards done
2011/09/18 22:16:03 2AAC6850 s anti cascading disabled
2011/09/18 22:16:03 2AFE74B0 p serv5.zargacum.net: resolved ip=84.16.240.217
2011/09/18 22:16:03 2B13F4B0 c plain dvbapi-client granted (root, au(auto)=0)
2011/09/18 22:16:03 2B13F4B0 c dvbapi: can't open priority file /var/tuxbox/config/oscam.dvbapi
2011/09/18 22:16:03 2AFE74B0 p cccam(r) vip: login failed, pwd ack not received (n = 0)
2011/09/18 22:16:05 2B13F4B0 c dvbapi: [ADD PID 0] CAID: 0D06 ECM_PID: 0215 PROVID: 000000
2011/09/18 22:16:05 2B13F4B0 c dvbapi: [ADD PID 1] CAID: 0B01 ECM_PID: 0216 PROVID: 000000
2011/09/18 22:16:05 2B13F4B0 c dvbapi: new program number: 1589 (0D06:1589 unknown)
2011/09/18 22:16:05 2B13F4B0 c root (0D06&0000C0/1589/B4:03FB): rejected user ident (0 ms) (of 0 avail 0) (no card support 0D06:0000C0)
2011/09/18 22:16:06 2B13F4B0 c dvbapi: try pids again #1
2011/09/18 22:16:06 2B13F4B0 c root (0B01&000000/1589/67:67B7): rejected user ident (1 ms) (of 0 avail 0) (no card support 0B01:000000)
2011/09/18 22:16:06 2B13F4B0 c root (0D06&0000C0/1589/B4:03FB): rejected user ident (0 ms) (of 0 avail 0) (no card support 0D06:0000C0)
2011/09/18 22:16:06 2B13F4B0 c dvbapi: try pids again #2
2011/09/18 22:16:06 2B13F4B0 c root (0B01&000000/1589/67:67B7): rejected user ident (0 ms) (of 0 avail 0) (no card support 0B01:000000)
2011/09/18 22:16:06 2B13F4B0 c root (0D06&0000C0/1589/B4:03FB): rejected user ident (0 ms) (of 0 avail 0) (no card support 0D06:0000C0)
2011/09/18 22:16:06 2B13F4B0 c dvbapi: try pids again #3
2011/09/18 22:16:06 2B13F4B0 c dvbapi: can't decode channel
2011/09/18 22:16:06 2B13F4B0 c root (0B01&000000/1589/67:67B7): rejected user ident (0 ms) (of 0 avail 0) (no card support 0B01:000000) и файл oscam server [reader]
enable = 0
label = VIP
protocol = newcamd
key = 0102030405060708091011121314
device = serv5.zargacum.net,1003
account = .......,.......
group = 1
fallback = 0
ReconnectTimeout = 10
[reader]
enable = 0
label = VIP
Protocol = camd35
device = serv5.zargacum.net,1001
account = ..........,.........
group = 1
fallback = 0
ReconnectTimeout = 10
[reader]
enable = 1
label = VIP
protocol = cccam
device = serv5.zargacum.net,1003
account = ..........,..........
group = 1
ReconnectTimeout = 10
cccversion = 2.2.1 файл oscam conf [global]
nice = -1
WaitForCards = 1
#pidfile = /var/run/oscam.pid
#logfile = /var/mnt/hdd/oscam.log
MaxLogSize = 500
ClientTimeout = 5
ClientMaxIdle = 9999999
[dvbapi]
enabled = 1
user = root
au = 1
boxtype = dreambox
[webif]
httpport = 8888
#httpuser = root
#httppwd = ..........
httpallowed = 127.0.0.1,192.168.0.0-192.168.255.255 къде бъркам
помагайте инсталирах oskam 1.00 svn 4574 на dm800 hd но не мога да го подкарам като клиент [global]
nice = -1
WaitForCards = 1
#pidfile = /var/run/oscam.pid
#logfile = /var/mnt/hdd/oscam.log
MaxLogSize = 500
ClientTimeout = 5
ClientMaxIdle = 9999999
[dvbapi]
enabled = 1
user = root
au = 1
boxtype = dreambox
[webif]
httpport = 8888
#httpuser = root
#httppwd = ..........
httpallowed = 127.0.0.1,192.168.0.0-192.168.255.255 [reader]
enable = 1
label = VIP
protocol = cccam
device = serv5.zargacum.net,1003
account = ........,........
group = 1
ReconnectTimeout = 10
cccversion = 2.2.1 [account]
User = ..........
Pwd = ..........
Uniq = 0
Group = 1
Chid = 0652:0015,FFFF,01;0654:01;0602:00,0001,0019,0032,0 043
Ident = 0500:023700;0602:000000;0652:0;0654:0;4AE1:0;090F: 0;0B01:000000
log fail -------------------------------------------------------------------------------
>> OSCam << cardserver started at Mon Sep 19 13:06:30 2011
-------------------------------------------------------------------------------
2011/09/19 13:06:30 2AAC6850 s >> OSCam << cardserver started version 1.00-unstable_svn, build #4574 (mips-tuxbox-linux)
2011/09/19 13:06:30 2AAC6850 s version=1.00-unstable_svn, build #4574, system=mips-tuxbox-linux, nice=-1
2011/09/19 13:06:30 2AAC6850 s client max. idle=9999999 sec, debug level=0
2011/09/19 13:06:30 2AAC6850 s max. logsize=500 Kb
2011/09/19 13:06:30 2AAC6850 s client timeout=5000 ms, fallback timeout=2500 ms, cache delay=0 ms
2011/09/19 13:06:30 2AAC6850 s auth size=4976
2011/09/19 13:06:30 2AAC6850 s Cannot open file "/var/tuxbox/config/oscam.services" (errno=2)
2011/09/19 13:06:30 2AAC6850 s userdb reloaded: 1 accounts loaded, 0 expired, 0 disabled
2011/09/19 13:06:30 2AAC6850 s signal handling initialized (type=sysv)
2011/09/19 13:06:30 2AAC6850 s can't open file "/var/tuxbox/config/oscam.srvid" (err=2), no service-id's loaded
2011/09/19 13:06:30 2AAC6850 s can't open file "/var/tuxbox/config/oscam.tiers" (err=2), no tier-id's loaded
2011/09/19 13:06:30 2AAC6850 s can't open file "/var/tuxbox/config/oscam.provid" (err=2), no provids's loaded
2011/09/19 13:06:30 2AAC6850 s can't open file "/var/tuxbox/config/oscam.ird" (errno=2) irdeto guessing not loaded
2011/09/19 13:06:30 2AAC6850 s monitor: disabled
2011/09/19 13:06:30 2AAC6850 s camd33: disabled
2011/09/19 13:06:30 2AAC6850 s camd35: disabled
2011/09/19 13:06:30 2AAC6850 s cs378x: disabled
2011/09/19 13:06:30 2AAC6850 s newcamd: disabled
2011/09/19 13:06:30 2AAC6850 s cccam: disabled
2011/09/19 13:06:30 2AAC6850 s radegast: disabled
2011/09/19 13:06:30 2AAC6850 s http thread started
2011/09/19 13:06:30 2AAC6850 s creating thread for device serv5.zargacum.net
2011/09/19 13:06:30 2AAC6850 s loadbalancer: can't read from file /tmp/.oscam/stat
2011/09/19 13:06:30 2AAC6850 s waiting for local card init
2011/09/19 13:06:30 2AAC6850 s init for all local cards done
2011/09/19 13:06:30 2AAC6850 s anti cascading disabled
2011/09/19 13:06:30 2AEE74B0 h HTTP Server listening on port 8888
2011/09/19 13:06:30 2AFE74B0 p proxy thread started (thread=2AFE74B0, label=vip, server=serv5.zargacum.net)
2011/09/19 13:06:30 2AFE74B0 p connecting to serv5.zargacum.net
2011/09/19 13:06:30 2B0E74B0 c plain dvbapi-client granted (anonymous, au(auto)=0)
2011/09/19 13:06:30 2B0E74B0 c dvbapi: can't open priority file /var/tuxbox/config/oscam.dvbapi
2011/09/19 13:06:30 2AFE74B0 p serv5.zargacum.net: resolved ip=84.16.240.217
2011/09/19 13:06:30 2AFE74B0 p cccam(r) vip: login failed, pwd ack not received (n = 0)
2011/09/19 13:06:32 2B0E74B0 c dvbapi: [ADD PID 0] CAID: 0B01 ECM_PID: 0218 PROVID: 000000
2011/09/19 13:06:32 2B0E74B0 c dvbapi: [ADD PID 1] CAID: 0D06 ECM_PID: 0217 PROVID: 000000
2011/09/19 13:06:32 2B0E74B0 c dvbapi: new program number: 158A (0B01:158A unknown)
2011/09/19 13:06:32 2AFE74B0 p connecting to serv5.zargacum.net
2011/09/19 13:06:33 2AFE74B0 p vip server blocked connection!
2011/09/19 13:06:33 2B0E74B0 c anonymous (0B01&000000/158A/67:97E6): rejected reader peer (9 ms) (of 1 avail 1)
2011/09/19 13:06:33 2AFE74B0 p vip connection blocked, retrying later
2011/09/19 13:06:33 2B0E74B0 c dvbapi: try pids again #1
2011/09/19 13:06:33 2B0E74B0 c anonymous (0D06&0000C0/158A/B4:5506): rejected reader peer (3 ms) (of 1 avail 1)
2011/09/19 13:06:38 2B0E74B0 c anonymous (0B01&000000/158A/67:97E6): timeout (5028 ms) (of 0 avail 0)
Стана бях изпуснал една буква от паролата.Получавам 2 линии от които гледам с cccam .може ли някои да помогне как се добавя втора линия при оскам
Цитат на: дан4ик;119858Стана бях изпуснал една буква от паролата.Получавам 2 линии от които гледам с cccam .може ли някои да помогне как се добавя втора линия при оскам
Колега както си написал първата линия в оскам сървар си добавяш по същия начин и втората и си ок.