All In One IPTV Solution
Върни се   Digital TV Forums - БЪЛГАРСКИЯТ ФОРУМ ЗА ЦИФРОВА ТЕЛЕВИЗИЯ > Шеринг и емулатори > Емулатори

Отговори
 
Контрол над темата Начин на разглеждане
  #1  
Стар 07-06-2019
kostadin_123 kostadin_123 не е на линия
Banned
 

Дата на присъединяване: Dec 2018
Мнения: 166
Благодари: 22
Получил благодарност:
24 пъти в 23 поста
Сваляния: 25
Ъплоуди: 1
По подразбиране Четец за smart карти

Здравейте колеги, вероятно темата не е за тази рубрика, но искам да попитам възможно ли е да използвам следният четец:


ACS ACR38U-I1 38U вместо широко използваните тук openply, mouse и други китайски чудеса за връзка към rapsberry Pi3 за четене на смарткарти платени при сателитен оператор?
Описание тук.
Някой ползвал ли е и как се настройва за работа с oscam?
Отговори с цитат
  #2  
Стар 07-06-2019
Аватара на 111111
111111 111111 е на линия
форумец-ветеран
 

Дата на присъединяване: Feb 2015
Мнения: 1,166
Благодари: 364
Получил благодарност:
420 пъти в 291 поста
Сваляния: 7
Ъплоуди: 0
По подразбиране

Да и си работи стабилно през PCSC протокола.
Не се клоква.
__________________
Подпис от долоподписания
Благодари натискайки "Thanks" бутона,
ако сметнеш поста за полезен.
Отговори с цитат
Следните потребители (2) благодарят на 111111 за този полезен пост
bate_dino (07-06-2019), kostadin_123 (13-06-2019)
  #3  
Стар 07-06-2019
bate_dino bate_dino не е на линия
мега форумец
 

Дата на присъединяване: Jun 2010
Местоположение: София
Мнения: 908
Благодари: 236
Получил благодарност:
337 пъти в 271 поста
Сваляния: 41
Ъплоуди: 1
По подразбиране

Цитирай:
Първоначално написано от 111111 Вижте мненията
Да и си работи стабилно през PCSC протокола.
Не се клоква.
Само емулатора трябва да е компилиран с такъв драйвер.
__________________

Отговори с цитат
  #4  
Стар 07-06-2019
Аватара на 111111
111111 111111 е на линия
форумец-ветеран
 

Дата на присъединяване: Feb 2015
Мнения: 1,166
Благодари: 364
Получил благодарност:
420 пъти в 291 поста
Сваляния: 7
Ъплоуди: 0
По подразбиране

Цитирай:
Първоначално написано от bate_dino Вижте мненията
Само емулатора трябва да е компилиран с такъв драйвер.
Емулатора е друго нещо нямащо общо с четеца.
__________________
Подпис от долоподписания
Благодари натискайки "Thanks" бутона,
ако сметнеш поста за полезен.
Отговори с цитат
  #5  
Стар 13-06-2019
kostadin_123 kostadin_123 не е на линия
Banned
 

Дата на присъединяване: Dec 2018
Мнения: 166
Благодари: 22
Получил благодарност:
24 пъти в 23 поста
Сваляния: 25
Ъплоуди: 1
По подразбиране

Благодаря за отговорите, а как да го конфигурирам?
oscam-emu е готов bin които намерих от някъде за arm7 процесори и нямам представа дали има драйвер за този четец или драйверът за usb четци е универсален?

Последно редактирано от kostadin_123 : 13-06-2019 на 09:33
Отговори с цитат
  #6  
Стар 13-06-2019
Аватара на marto
marto marto е на линия
мега форумец
 

Дата на присъединяване: Mar 2008
Местоположение: Варна
Мнения: 314
Благодари: 44
Получил благодарност:
119 пъти в 82 поста
Сваляния: 47
Ъплоуди: 0
По подразбиране

При стартиранОскам влизаш в уеб-интерфейса и оттам в Files->oscam.version ще можеш да видиш дали е компилиран със съпорт на твоя кард рийдър. Отделно ще трябва да видиш дали имаш инсталирани драйверите kernel-module-ftdi-sio. После с командите dmesg и lsusb ще можеш да разбереш дали приемника го разпознава.
__________________
VU+Ultimo 4K; ET9000; IPbox9000HD ; dm500s; Triax TD110; Invacom SNH-0.3dB; 65'' Samsung JS8500 SUHD LED 3DTV
Отговори с цитат
  #7  
Стар 13-06-2019
kostadin_123 kostadin_123 не е на линия
Banned
 

Дата на присъединяване: Dec 2018
Мнения: 166
Благодари: 22
Получил благодарност:
24 пъти в 23 поста
Сваляния: 25
Ъплоуди: 1
По подразбиране

Това е от lsusb:
$ lsusb
Bus 001 Device 004: ID 072f:90cc Advanced Card Systems, Ltd ACR38 SmartCard Reader
Bus 001 Device 003: ID 0424:ec00 Standard Microsystems Corp. SMSC9512/9514 Fast Ethernet Adapter
Bus 001 Device 002: ID 0424:9514 Standard Microsystems Corp. SMC9514 Hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub




А това е oscam.version:


Unix starttime: 1560377104
Starttime: 13.06.2019 01:05:04
Version: oscam-build-DreamOSat-1.20_svn-r11512-795
Compiler: arm-marvell-linux-gnueabi-ssl
Box type: generic (generic)
PID: 416
TempDir: /tmp/.oscam
GBox tmp_dir: not defined using: /tmp/.oscam
ConfigDir: /usr/local/etc/
WebifPort: 8888

Web interface support: yes
LiveLog support: yes
jQuery support intern: yes
Touch interface support: no
SSL support: yes
DVB API support: yes
DVB API with AZBOX support: no
DVB API with MCA support: no
DVB API with COOLAPI support: no
DVB API with COOLAPI2 support: no
DVB API with STAPI support: no
DVB API with STAPI5 support: no
DVB API with NEUTRINO support: no
DVB API read-sdt charsets: yes
Irdeto guessing: yes
Anti-cascading support: no
Debug mode: yes
Monitor: yes
Loadbalancing support: yes
Cache exchange support: no
CW Cycle Check support: no
LCD support: no
LED support: no
Clockfix with realtime clock: no
IPv6 support: no
Emulator support: yes
Built-in SoftCam.Key: yes

camd 3.3x: no
camd 3.5 UDP: yes
camd 3.5 TCP: yes
newcamd: yes
CCcam: yes
CCcam share: yes
gbox: yes
radegast: no
scam: yes
serial: no
constant CW: yes
Pandora: no
ghttp: no

Reader support: yes

Nagra: yes
Nagra Merlin: yes
Irdeto: yes
Conax: yes
Cryptoworks: yes
Seca: yes
Viaccess: yes
NDS Videoguard: yes
DRE Crypt: yes
TONGFANG: yes
Bulcrypt: yes
Griffin: yes
DGCrypt: yes

cardreader_phoenix: yes
cardreader_drecas: yes
cardreader_internal_azbox: no
cardreader_internal_coolapi: no
cardreader_internal_coolapi2: no
cardreader_internal_sci: yes
cardreader_sc8in1: yes
cardreader_mp35: yes
cardreader_smargo: yes
cardreader_pcsc: no
cardreader_smartreader: no
cardreader_db2com: yes
cardreader_stapi: no
cardreader_stapi5: no
cardreader_stinger: yes
------------------------------------------------------------------
И това е от dmesg:


$ dmesg
[ 0.000000] Booting Linux on physical CPU 0x0
[ 0.000000] Linux version 4.14.79-v7+ (dc4@dc4-XPS13-9333) (gcc version 4.9.3 (crosstool-NG crosstool-ng-1.22.0-88-g8460611)) #1159 SMP Sun Nov 4 17:50:20 GMT 2018
[ 0.000000] CPU: ARMv7 Processor [410fd034] revision 4 (ARMv7), cr=10c5383d
[ 0.000000] CPU: div instructions available: patching division code
[ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
[ 0.000000] OF: fdt: Machine model: Raspberry Pi 3 Model B Rev 1.2
[ 0.000000] Memory policy: Data cache writealloc
[ 0.000000] cma: Reserved 8 MiB at 0x3ac00000
[ 0.000000] On node 0 totalpages: 242688
[ 0.000000] free_area_init_node: node 0, pgdat 80c85280, node_mem_map ba39f000
[ 0.000000] Normal zone: 2133 pages used for memmap
[ 0.000000] Normal zone: 0 pages reserved
[ 0.000000] Normal zone: 242688 pages, LIFO batch:31
[ 0.000000] percpu: Embedded 17 pages/cpu @ba348000 s38720 r8192 d22720 u69632
[ 0.000000] pcpu-alloc: s38720 r8192 d22720 u69632 alloc=17*4096
[ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3
[ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 240555
[ 0.000000] Kernel command line: 8250.nr_uarts=0 bcm2708_fb.fbwidth=1824 bcm2708_fb.fbheight=984 bcm2708_fb.fbswap=1 vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000 dwc_otg.lpm_enable=0 console=ttyS0,115200 console=tty1 root=PARTUUID=e84c7e75-02 rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait quiet splash plymouth.ignore-serial-consoles
[ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] Memory: 940232K/970752K available (7168K kernel code, 576K rwdata, 2076K rodata, 1024K init, 698K bss, 22328K reserved, 8192K cma-reserved)
[ 0.000000] Virtual kernel memory layout:
vector : 0xffff0000 - 0xffff1000 ( 4 kB)
fixmap : 0xffc00000 - 0xfff00000 (3072 kB)
vmalloc : 0xbb800000 - 0xff800000 (1088 MB)
lowmem : 0x80000000 - 0xbb400000 ( 948 MB)
modules : 0x7f000000 - 0x80000000 ( 16 MB)
.text : 0x80008000 - 0x80800000 (8160 kB)
.init : 0x80b00000 - 0x80c00000 (1024 kB)
.data : 0x80c00000 - 0x80c9017c ( 577 kB)
.bss : 0x80c97f04 - 0x80d468b0 ( 699 kB)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 0.000000] ftrace: allocating 25287 entries in 75 pages
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16
[ 0.000000] arch_timer: cp15 timer(s) running at 19.20MHz (phys).
[ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x46d987e47, max_idle_ns: 440795202767 ns
[ 0.000007] sched_clock: 56 bits at 19MHz, resolution 52ns, wraps every 4398046511078ns
[ 0.000018] Switching to timer-based delay loop, resolution 52ns
[ 0.000266] Console: colour dummy device 80x30
[ 0.000283] console [tty1] enabled
[ 0.000308] Calibrating delay loop (skipped), value calculated using timer frequency.. 38.40 BogoMIPS (lpj=192000)
[ 0.000323] pid_max: default: 32768 minimum: 301
[ 0.000642] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.000656] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.001599] Disabling memory control group subsystem
[ 0.001674] CPU: Testing write buffer coherency: ok
[ 0.002088] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
[ 0.002490] Setting up static identity map for 0x100000 - 0x10003c
[ 0.002610] Hierarchical SRCU implementation.
[ 0.003283] smp: Bringing up secondary CPUs ...
[ 0.004065] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
[ 0.004906] CPU2: thread -1, cpu 2, socket 0, mpidr 80000002
[ 0.005726] CPU3: thread -1, cpu 3, socket 0, mpidr 80000003
[ 0.005830] smp: Brought up 1 node, 4 CPUs
[ 0.005841] SMP: Total of 4 processors activated (153.60 BogoMIPS).
[ 0.005847] CPU: All CPU(s) started in HYP mode.
[ 0.005851] CPU: Virtualization extensions available.
[ 0.006772] devtmpfs: initialized
[ 0.017014] random: get_random_u32 called from bucket_table_alloc+0xfc/0x24c with crng_init=0
[ 0.017781] VFP support v0.3: implementor 41 architecture 3 part 40 variant 3 rev 4
[ 0.018003] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
[ 0.018021] futex hash table entries: 1024 (order: 4, 65536 bytes)
[ 0.018575] pinctrl core: initialized pinctrl subsystem
[ 0.019318] NET: Registered protocol family 16
[ 0.022071] DMA: preallocated 1024 KiB pool for atomic coherent allocations
[ 0.026954] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers.
[ 0.026962] hw-breakpoint: maximum watchpoint size is 8 bytes.
[ 0.027175] Serial: AMBA PL011 UART driver
[ 0.028835] bcm2835-mbox 3f00b880.mailbox: mailbox enabled
[ 0.029296] uart-pl011 3f201000.serial: could not find pctldev for node /soc/gpio@7e200000/uart0_pins, deferring probe
[ 0.061413] bcm2835-dma 3f007000.dma: DMA legacy API manager at bb813000, dmachans=0x1
[ 0.062833] SCSI subsystem initialized
[ 0.063057] usbcore: registered new interface driver usbfs
[ 0.063109] usbcore: registered new interface driver hub
[ 0.063194] usbcore: registered new device driver usb
[ 0.070087] raspberrypi-firmware soc:firmware: Attached to firmware from 2018-11-04 16:31
[ 0.071489] clocksource: Switched to clocksource arch_sys_counter
[ 0.148367] VFS: Disk quotas dquot_6.6.0
[ 0.148450] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 0.148636] FS-Cache: Loaded
[ 0.148822] CacheFiles: Loaded
[ 0.156769] NET: Registered protocol family 2
[ 0.157491] TCP established hash table entries: 8192 (order: 3, 32768 bytes)
[ 0.157600] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
[ 0.157785] TCP: Hash tables configured (established 8192 bind 8192)
[ 0.157915] UDP hash table entries: 512 (order: 2, 16384 bytes)
[ 0.157959] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[ 0.158188] NET: Registered protocol family 1
[ 0.158654] RPC: Registered named UNIX socket transport module.
[ 0.158660] RPC: Registered udp transport module.
[ 0.158665] RPC: Registered tcp transport module.
[ 0.158670] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 0.160333] hw perfevents: enabled with armv7_cortex_a7 PMU driver, 7 counters available
[ 0.163092] workingset: timestamp_bits=14 max_order=18 bucket_order=4
[ 0.171020] FS-Cache: Netfs 'nfs' registered for caching
[ 0.171645] NFS: Registering the id_resolver key type
[ 0.171684] Key type id_resolver registered
[ 0.171689] Key type id_legacy registered
[ 0.171704] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
[ 0.173624] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251)
[ 0.173754] io scheduler noop registered
[ 0.173761] io scheduler deadline registered (default)
[ 0.173931] io scheduler cfq registered
[ 0.173938] io scheduler mq-deadline registered
[ 0.173944] io scheduler kyber registered
[ 0.176687] BCM2708FB: allocated DMA memory fad10000
[ 0.176714] BCM2708FB: allocated DMA channel 0 @ bb813000
[ 0.226927] Console: switching to colour frame buffer device 228x61
[ 0.257163] bcm2835-rng 3f104000.rng: hwrng registered
[ 0.257302] vc-mem: phys_addr:0x00000000 mem_base=0x3ec00000 mem_size:0x40000000(1024 MiB)
[ 0.257778] vc-sm: Videocore shared memory driver
[ 0.258057] gpiomem-bcm2835 3f200000.gpiomem: Initialised: Registers at 0x3f200000
[ 0.267699] brd: module loaded
[ 0.276658] loop: module loaded
[ 0.276672] Loading iSCSI transport class v2.0-870.
[ 0.277383] libphy: Fixed MDIO Bus: probed
[ 0.277483] usbcore: registered new interface driver lan78xx
[ 0.277538] usbcore: registered new interface driver smsc95xx
[ 0.277555] dwc_otg: version 3.00a 10-AUG-2012 (platform bus)
[ 0.305476] dwc_otg 3f980000.usb: base=0xf0980000
[ 0.505709] Core Release: 2.80a
[ 0.505717] Setting default values for core params
[ 0.505749] Finished setting default values for core params
[ 0.706012] Using Buffer DMA mode
[ 0.706019] Periodic Transfer Interrupt Enhancement - disabled
[ 0.706023] Multiprocessor Interrupt Enhancement - disabled
[ 0.706030] OTG VER PARAM: 0, OTG VER FLAG: 0
[ 0.706043] Dedicated Tx FIFOs mode
[ 0.706393] WARN::dwc_otg_hcd_init:1046: FIQ DMA bounce buffers: virt = 0xbad04000 dma = 0xfad04000 len=9024
[ 0.706420] FIQ FSM acceleration enabled for :
Non-periodic Split Transactions
Periodic Split Transactions
High-Speed Isochronous Endpoints
Interrupt/Control Split Transaction hack enabled
[ 0.706427] dwc_otg: Microframe scheduler enabled
[ 0.706481] WARN::hcd_init_fiq:459: FIQ on core 1 at 0x805ea470
[ 0.706493] WARN::hcd_init_fiq:460: FIQ ASM at 0x805ea7d8 length 36
[ 0.706505] WARN::hcd_init_fiq:486: MPHI regs_base at 0xf0006000
[ 0.706561] dwc_otg 3f980000.usb: DWC OTG Controller
[ 0.706595] dwc_otg 3f980000.usb: new USB bus registered, assigned bus number 1
[ 0.706626] dwc_otg 3f980000.usb: irq 62, io mem 0x00000000
[ 0.706674] Init: Port Power? op_state=1
[ 0.706679] Init: Power Port (0)
[ 0.706886] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 0.706897] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.706906] usb usb1: Product: DWC OTG Controller
[ 0.706914] usb usb1: Manufacturer: Linux 4.14.79-v7+ dwc_otg_hcd
[ 0.706923] usb usb1: SerialNumber: 3f980000.usb
[ 0.707543] hub 1-0:1.0: USB hub found
[ 0.707590] hub 1-0:1.0: 1 port detected
[ 0.708157] dwc_otg: FIQ enabled
[ 0.708162] dwc_otg: NAK holdoff enabled
[ 0.708168] dwc_otg: FIQ split-transaction FSM enabled
[ 0.708178] Module dwc_common_port init
[ 0.708432] usbcore: registered new interface driver usb-storage
[ 0.708603] mousedev: PS/2 mouse device common for all mice
[ 0.708679] IR NEC protocol handler initialized
[ 0.708686] IR RC5(x/sz) protocol handler initialized
[ 0.708690] IR RC6 protocol handler initialized
[ 0.708695] IR JVC protocol handler initialized
[ 0.708701] IR Sony protocol handler initialized
[ 0.708706] IR SANYO protocol handler initialized
[ 0.708711] IR Sharp protocol handler initialized
[ 0.708717] IR MCE Keyboard/mouse protocol handler initialized
[ 0.708722] IR XMP protocol handler initialized
[ 0.709439] bcm2835-wdt 3f100000.watchdog: Broadcom BCM2835 watchdog timer
[ 0.709702] bcm2835-cpufreq: min=600000 max=1200000
[ 0.710074] sdhci: Secure Digital Host Controller Interface driver
[ 0.710080] sdhci: Copyright(c) Pierre Ossman
[ 0.710446] mmc-bcm2835 3f300000.mmc: could not get clk, deferring probe
[ 0.710770] sdhost-bcm2835 3f202000.mmc: could not get clk, deferring probe
[ 0.710870] sdhci-pltfm: SDHCI platform and OF driver helper
[ 0.712296] ledtrig-cpu: registered to indicate ac****ty on CPUs
[ 0.712479] hidraw: raw HID events driver (C) Jiri Kosina
[ 0.712610] usbcore: registered new interface driver usbhid
[ 0.712615] usbhid: USB HID core driver
[ 0.713398] vchiq: vchiq_init_state: slot_zero = bad80000, is_master = 0
[ 0.714914] [vc_sm_connected_init]: start
[ 0.724435] [vc_sm_connected_init]: end - returning 0
[ 0.725083] Initializing XFRM netlink socket
[ 0.725108] NET: Registered protocol family 17
[ 0.725205] Key type dns_resolver registered
[ 0.725745] Registering SWP/SWPB emulation handler
[ 0.726343] registered taskstats version 1
[ 0.732352] uart-pl011 3f201000.serial: cts_event_workaround enabled
[ 0.732437] 3f201000.serial: ttyAMA0 at MMIO 0x3f201000 (irq = 87, base_baud = 0) is a PL011 rev2
[ 0.734214] mmc-bcm2835 3f300000.mmc: mmc_debug:0 mmc_debug2:0
[ 0.734223] mmc-bcm2835 3f300000.mmc: DMA channel allocated
[ 0.802105] sdhost: log_buf @ bad07000 (fad07000)
[ 0.837932] mmc1: queuing unknown CIS tuple 0x80 (2 bytes)
[ 0.839501] mmc1: queuing unknown CIS tuple 0x80 (3 bytes)
[ 0.841065] mmc1: queuing unknown CIS tuple 0x80 (3 bytes)
[ 0.843856] mmc1: queuing unknown CIS tuple 0x80 (7 bytes)
[ 0.881510] mmc0: sdhost-bcm2835 loaded - DMA enabled (>1)
[ 0.882575] of_cfs_init
[ 0.882728] of_cfs_init: OK
[ 0.883280] Waiting for root device PARTUUID=e84c7e75-02...
[ 0.920021] random: fast init done
[ 0.931596] Indeed it is in host mode hprt0 = 00021501
[ 0.999024] mmc0: host does not support reading read-only switch, assuming write-enable
[ 1.001782] mmc0: new high speed SDHC card at address 59b4
[ 1.002294] mmcblk0: mmc0:59b4 USD00 15.0 GiB
[ 1.003615] mmcblk0: p1 p2
[ 1.022676] mmc1: new high speed SDIO card at address 0001
[ 1.034056] EXT4-fs (mmcblk0p2): INFO: recovery required on readonly filesystem
[ 1.034063] EXT4-fs (mmcblk0p2): write access will be enabled during recovery
[ 1.141540] usb 1-1: new high-speed USB device number 2 using dwc_otg
[ 1.141662] Indeed it is in host mode hprt0 = 00001101
[ 1.381786] usb 1-1: New USB device found, idVendor=0424, idProduct=9514
[ 1.381799] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 1.382503] hub 1-1:1.0: USB hub found
[ 1.382591] hub 1-1:1.0: 5 ports detected
[ 1.701551] usb 1-1.1: new high-speed USB device number 3 using dwc_otg
[ 1.831853] usb 1-1.1: New USB device found, idVendor=0424, idProduct=ec00
[ 1.831870] usb 1-1.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 1.834601] smsc95xx v1.0.6
[ 1.924539] smsc95xx 1-1.1:1.0 eth0: register 'smsc95xx' at usb-3f980000.usb-1.1, smsc95xx USB 2.0 Ethernet, b8:27:eb:2d:40:44
[ 2.738778] EXT4-fs (mmcblk0p2): orphan cleanup on readonly fs
[ 2.739120] EXT4-fs (mmcblk0p2): 6 orphan inodes deleted
[ 2.739127] EXT4-fs (mmcblk0p2): recovery complete
[ 2.813424] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null)
[ 2.813489] VFS: Mounted root (ext4 filesystem) readonly on device 179:2.
[ 2.824513] devtmpfs: mounted
[ 2.827863] Freeing unused kernel memory: 1024K
[ 3.244280] systemd[1]: System time before build time, advancing clock.
[ 3.378394] NET: Registered protocol family 10
[ 3.379669] Segment Routing with IPv6
[ 3.389888] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 3.409267] random: systemd: uninitialized urandom read (16 bytes read)
[ 3.415252] systemd[1]: systemd 232 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN)
[ 3.415821] systemd[1]: Detected architecture arm.
[ 3.424128] systemd[1]: Set hostname to <kk>.
[ 3.468163] random: systemd: uninitialized urandom read (16 bytes read)
[ 3.505540] random: systemd-sysv-ge: uninitialized urandom read (16 bytes read)
[ 4.014008] systemd[1]: Listening on Journal Socket (/dev/log).
[ 4.014599] systemd[1]: Listening on udev Control Socket.
[ 4.014799] systemd[1]: Listening on fsck to fsckd communication Socket.
[ 4.031897] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[ 4.032246] systemd[1]: Listening on Syslog Socket.
[ 4.032497] systemd[1]: Listening on udev Kernel Socket.
[ 4.032816] systemd[1]: Listening on Journal Socket.
[ 4.148379] i2c /dev entries driver
[ 4.554164] EXT4-fs (mmcblk0p2): re-mounted. Opts: (null)
[ 4.634408] systemd-journald[83]: Received request to flush runtime journal from PID 1
[ 5.280515] snd_bcm2835: module is from the staging directory, the quality is unknown, you have been warned.
[ 5.284044] bcm2835_alsa bcm2835_alsa: card created with 8 channels
[ 5.372067] brcmfmac: F1 signature read @0x18000000=0x1541a9a6
[ 5.382543] brcmfmac: brcmf_fw_map_chip_to_name: using brcm/brcmfmac43430-sdio.bin for chip 0x00a9a6(43430) rev 0x000001
[ 5.382866] usbcore: registered new interface driver brcmfmac
[ 5.625847] brcmfmac: brcmf_c_preinit_dcmds: Firmware version = wl0: Oct 23 2017 03:55:53 version 7.45.98.38 (r674442 CY) FWID 01-e58d219f
[ 5.626831] brcmfmac: brcmf_c_preinit_dcmds: CLM version = API: 12.2 Data: 7.11.15 Compiler: 1.24.2 ClmImport: 1.24.1 Creation: 2014-05-26 10:53:55 Inc Data: 9.10.39 Inc Compiler: 1.29.4 Inc ClmImport: 1.36.3 Creation: 2017-10-23 03:47:14
[ 6.660377] uart-pl011 3f201000.serial: no DMA platform data
[ 7.470882] random: crng init done
[ 7.470899] random: 7 urandom warning(s) missed due to ratelimiting
[ 7.996334] smsc95xx 1-1.1:1.0 eth0: hardware isn't capable of remote wakeup
[ 8.645538] Adding 102396k swap on /var/swap. Priority:-2 extents:1 across:102396k SSFS
[ 9.514280] smsc95xx 1-1.1:1.0 eth0: link up, 100Mbps, full-duplex, lpa 0xCDE1
[ 11.345950] Bluetooth: Core ver 2.22
[ 11.346079] NET: Registered protocol family 31
[ 11.346092] Bluetooth: HCI device and connection manager initialized
[ 11.347596] Bluetooth: HCI socket layer initialized
[ 11.347620] Bluetooth: L2CAP socket layer initialized
[ 11.347677] Bluetooth: SCO socket layer initialized
[ 11.384177] Bluetooth: HCI UART driver ver 2.3
[ 11.384186] Bluetooth: HCI UART protocol H4 registered
[ 11.384189] Bluetooth: HCI UART protocol Three-wire (H5) registered
[ 11.384339] Bluetooth: HCI UART protocol Broadcom registered
[ 11.802781] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 11.802789] Bluetooth: BNEP filters: protocol multicast
[ 11.802803] Bluetooth: BNEP socket layer initialized
[ 11.863738] Bluetooth: RFCOMM TTY layer initialized
[ 11.863766] Bluetooth: RFCOMM socket layer initialized
[ 11.863783] Bluetooth: RFCOMM ver 1.11
[ 18.506696] fuse init (API version 7.26)
[29010.291649] usb 1-1.4: new full-speed USB device number 4 using dwc_otg
[29010.433632] usb 1-1.4: New USB device found, idVendor=072f, idProduct=90cc
[29010.433645] usb 1-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[29010.433654] usb 1-1.4: Product: CCID USB Reader
[29010.433662] usb 1-1.4: Manufacturer: ACS
Отговори с цитат
  #8  
Стар 13-06-2019
Аватара на dzumba
dzumba dzumba е на линия
Царя на тъпаците
 

Дата на присъединяване: Feb 2009
Мнения: 9,397
Благодари: 96
Получил благодарност:
3,737 пъти в 2,140 поста
Сваляния: 89
Ъплоуди: 0
По подразбиране

cardreader_pcsc: no

значи не става,търси друг
Отговори с цитат
Следните потребители (2) благодарят на dzumba за този полезен пост
111111 (14-06-2019), kostadin_123 (14-06-2019)
  #9  
Стар 13-06-2019
Аватара на marto
marto marto е на линия
мега форумец
 

Дата на присъединяване: Mar 2008
Местоположение: Варна
Мнения: 314
Благодари: 44
Получил благодарност:
119 пъти в 82 поста
Сваляния: 47
Ъплоуди: 0
По подразбиране

Според горните логове от lsusb и dmesg кард рийдъра се разпознава от устройството. Само си намери Оскам с поддръжка на PCSC, както е посочил dzumba и трябва да тръгне при коректни настройки в oscam.server
__________________
VU+Ultimo 4K; ET9000; IPbox9000HD ; dm500s; Triax TD110; Invacom SNH-0.3dB; 65'' Samsung JS8500 SUHD LED 3DTV
Отговори с цитат
Следните потребители БЛАГОДАРЯТ на marto за този полезен пост :
kostadin_123 (14-06-2019)
  #10  
Стар 14-06-2019
kostadin_123 kostadin_123 не е на линия
Banned
 

Дата на присъединяване: Dec 2018
Мнения: 166
Благодари: 22
Получил благодарност:
24 пъти в 23 поста
Сваляния: 25
Ъплоуди: 1
По подразбиране

Май ще е най-добре да си го компилирам от репо, някой да знае репо за oscam+emu и какво трябва да направя за да се добави необходимия драйвер?
Отговори с цитат
Sponsored Links
VIVO Rent A Car  ВИДЕОЗАСНЕМАНЕ С ДРОН  Изработка на мобилни приложения за iOS
Отговори

Съобщения от Devil M
VIVO Rent A Car  

Тагове
smart, За, карти, четец


Активни потребители разглеждащи тази тема в момента: 1 (0 членове и 1 гости)
 
Контрол над темата
Начин на разглеждане

Подобни теми
Тема Започнал темата Форум Отговори Последно мнение
Електронен четец - PDF, закони.. аас Дъра-Бъра 12 03-01-2018 13:24
CS server на рутер + четец Онджичек Настройки на рутери 93 31-03-2014 21:09
CCCam вграден четец iivailo CCcam 2 02-05-2012 22:42
Оскам - Карти живков MPCS/OScam 12 15-08-2011 07:50
Нови карти за SKY UK Sharp987 CCcam 1 23-05-2009 12:38


Всички времена са във формат GMT +3. Часът е 14:18.


DTV-BG Powered by vBulletin Version 3.8.5
Copyright ©2000 - 2019, Jelsoft Enterprises Ltd.