Бих искал да съживя малко темата с надеждата някой който използва въпросния Smargo SmartReader да помогне с настройките му.
Устройството е същото като от снимката която съм приложил. Изглежда е клонинг на Argolis тъй като отвътре и отвън изглежда по същия начин.
Опитвам се да го подкарам на Ultimo4K и ет9000 с карта булкрипт в1, но неуспешно засега.
Ето какво е направено досега:
Инсталирани са драйверите kernel-module-ftdi-sio;
Приемника го разпознава като монтиран към /dev/ttyUSB0
#
dmesg
[ 2.927583] usbcore: registered new interface driver usbserial
[ 2.933691] usbcore: registered new interface driver usbserial_generic
[ 2.941550] usbserial: USB Serial support registered for generic
[ 2.948470] random: nonblocking pool is initialized
[ 2.957699] usbcore: registered new interface driver ftdi_sio
[ 2.963690] usbserial: USB Serial support registered for FTDI USB Serial Device
[ 2.971213] ftdi_sio 10-1:1.0: FTDI USB Serial Device converter detected
[ 2.978607] usb 10-1: Detected FT232BM
[ 2.982376] usb 10-1: Number of endpoints 2
[ 2.986572] usb 10-1: Endpoint 1 MaxPacketSize 64
[ 2.991287] usb 10-1: Endpoint 2 MaxPacketSize 64
[ 2.996027] usb 10-1: Setting MaxPacketSize 64
[ 3.001004] ftdi_sio ttyUSB0: Unable to read latency timer: -32
[ 3.003280] usb 10-1: FTDI USB Serial Device converter now attached to ttyUSB0
Тук единствено ме притеснява подчертания ред...
#
lsusb
Bus 005 Device 004: ID 0a5c:2045 Broadcom Corp. Bluetooth Controller
Bus 005 Device 005: ID 0a5c:0bdc Broadcom Corp.
Bus 009 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 008 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 006 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 004 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 010 Device 002: ID 0403:6001 Future Technology Devices International, Ltd FT232 USB-Serial (UART) IC
Bus 010 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 005 Device 002: ID 1a40:0101 Terminus Technology Inc. 4-Port HUB
Bus 005 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 002: ID 125f:dc1a A-DATA Technology Co., Ltd.
Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Оскам рийдъра е следния:
[reader]
label = Smargo
protocol = mouse
device = /dev/ttyUSB0
caid = 4AEE
detect = cd
ident = 4AEE:000000
group = 1
emmcache = 1,3,2,0
Каквито и Mhz, CardMhz да се сложат резултата е един и същ.
Оскам лог:
2017/11/07 14:50:44 00000000 s (main) Host name = vuultimo4k
2017/11/07 14:50:44 00000000 s (main) Release = 3.14.28-1.12
2017/11/07 14:50:44 00000000 s (main) Version = #1 SMP Thu Jun 15 08:53:06 CEST 2017
2017/11/07 14:50:44 00000000 s (main) Machine = armv7l
2017/11/07 14:50:44 00000000 s (main) Stb model = dm8000
2017/11/07 14:50:44 00000000 s (main) Stb vumodel = vuultimo4k
2017/11/07 14:50:44 00000000 s (main) Stb boxtype = vuultimo4k
2017/11/07 14:50:44 00000000 s (main) creating pidfile /tmp/.oscam/oscam.pid with pid 15032
2017/11/07 14:50:44 00000000 s (config) services reloaded: 0 services freed, 14 services loaded, rejected 0
2017/11/07 14:50:44 00000000 s (config) userdb reloaded: 5 accounts loaded, 0 expired, 4 disabled
2017/11/07 14:50:44 00000000 s (main) signal handling initialized
2017/11/07 14:50:44 00000000 s (config) 968 provid's loaded
2017/11/07 14:50:44 00000000 s (config) 5151 service-id's loaded in 11 ms
2017/11/07 14:50:44 00000000 s (config) WARNING: You risk high CPU load and high ECM times with more than 2000 service-id's!
2017/11/07 14:50:44 00000000 s (config) HINT: --> use optimized lists from
http://www.streamboard.tv/wiki/Srvid
2017/11/07 14:50:44 00000000 s (config) 8 tier-id's loaded
2017/11/07 14:50:44 00000000 s (net) monitor: initialized (fd=3, port=1055)
2017/11/07 14:50:44 00000000 s (net) cccam: initialized (fd=4, port=44443)
2017/11/07 14:50:44 00000000 s (reader) Smargo [mouse] creating thread for device /dev/ttyUSB0
2017/11/07 14:50:44 00000000 s (stat) loadbalancer: could not open /tmp/.oscam/stat for reading (errno=2 No such file or directory)
2017/11/07 14:50:44 00000000 s (main) waiting for local card init
2017/11/07 14:50:44 041737DF h (webif) webif: decompressed 177547 bytes back into 437176 bytes
2017/11/07 14:50:44 041737DF h (webif) HTTP Server running. ip=0.0.0.0 port=9090
2017/11/07 14:50:44 6D4DC527 r (reader) Smargo [mouse] Buffers readed 0 bytes total time_us 75113
2017/11/07 14:50:44 6D4DC527 r (reader) Smargo [mouse] Buffers readed 0 bytes total time_us 75101
2017/11/07 14:50:44 6D4DC527 r (reader) Smargo [mouse] Reader initialized (device=/dev/ttyUSB0, detect=cd, mhz=1200, cardmhz=357)
2017/11/07 14:50:48 00000000 s (main) init for all local cards done
2017/11/07 14:50:48 00000000 s (emmcache) loaded 0 emmcache records from /tmp/.oscam/oscam.emmcache in 1 ms
2017/11/07 14:50:48 00000000 s (emmcache) loaded 0 emmstat records from /tmp/.oscam/oscam.emmstat in 0 ms
2017/11/07 14:50:48 00000000 s (anticasc) anti cascading disabled
2017/11/07 14:50:48 70160BD5 c (client) plain dvbapi-client granted (local-client, au=auto (6 reader))
...и до там. Въобще не опитва да прочете картата. При вадене и поставяне отново на картата, няма никаква реакция/индикация в Оскам лога. Същия лог е при рестарт на Оскам с карта и без карта... Само когато картата се вкара в слота, то започва да мига зеления диод на Смарго-то.
Абсолютно същото се получава и на et9000.
Оскамите са с поддръжка на Smargo според информацията в oscam.version
cardreader_phoenix: yes
cardreader_drecas: yes
cardreader_internal_azbox: no
cardreader_internal_coolapi: no
cardreader_internal_coolapi2: no
cardreader_internal_sci: yes
cardreader_sc8in1: yes
cardreader_mp35: yes
cardreader_smargo: yes
cardreader_pcsc: no
cardreader_smartreader: yes
cardreader_db2com: yes
cardreader_stapi: no
cardreader_stapi5: no
cardreader_stinger: yes
Нещо пропускам ли, или просто четеца не работи?