Digital TV Forums - БЪЛГАРСКИЯТ ФОРУМ ЗА ЦИФРОВА ТЕЛЕВИЗИЯ

Digital TV Forums - БЪЛГАРСКИЯТ ФОРУМ ЗА ЦИФРОВА ТЕЛЕВИЗИЯ (http://www.dtv-bg.com/index.php)
-   DREAMBOX (http://www.dtv-bg.com/forumdisplay.php?f=27)
-   -   Дриймбокс Енигма2 - Плъгини (http://www.dtv-bg.com/showthread.php?t=1738)

Sharp987 06-04-2009 18:46

Дриймбокс Енигма2 - Плъгини
 
1Прикачено(и)
DFC - Dreambox Flash Control Webinterface

enigma2-plugin-extensions-dfc_0.0.9-20090220-r1
What's new:
*[Bugfix] Routine der IP-Adressen Zuordnung behoben.
enigma2-plugin-extensions-dfc_0.0.9-20090220-r1_mipsel.rar

Sharp987 06-04-2009 18:57

GSF_multi-transcoder

The GSF_multi-transcoder is a tool that launches Videolan on your pc with the appropriate settings and transcodes any [.avi] [.divx] or [.mp4] files into .ts format so they can be readable by your dreambox
It can be used as an alternative to the VLCF plugin but also it can be used to convert your divx, mp4, avi files to ts and transfer them automaticaly to the hard drive of your dreambox

How to use:
-----------------

Make sure you have VLC installed on your pc
Mount to your dreambox any directory of your pc
Place the two files (GSF_multi-transcoder_tool.exe and dreamsetup.txt) inside the pc directory that
you have already mounted to your dreambox
Setup dreamsetup.txt with your dreambox ip and password
Place in the same directory any .divx file and run the GSF_multi-transcoder_tool.exe
You will immediately see that a file is created with the same name but with a .ts extension
Allow a couple of minutes for the file to build up a bit
Now with your dreambox remote, in filemode navigate to the directory that you have
mounted, select the file with the .ts extension and press "ok" to start viewing.
Fast forward, pause and so on are handled by the coloured buttons of your remote
and they work flawlesly in contrary of the vlcf plugin that most of the time will freeze the box (of course maybe thats just me)

For files that you wish to be transfered to the dreambox hdd after they have been
transcoded just pace an underscore [_] in the beginning of the filename

e.g. myvideoclip.avi > _myvideoclip.avi
In case that you wish to merge subtitles in to the .ts file, place the subtitle file in the same
directory and make sure it has the same filename with the .divx or .avi file

e.g.
myvideoclip.avi
myvideoclip.srt

Note that in case of multiple .avi .divx .mp4 files in the directory the trancoding will
be done in alphabetical order

enjoy!!

GSF multi_transcoder_tool_v1.0.0.2_for_latest_version_of_vlc
GSF multi_transcoder_tool_v1.0.0.2.rar

Sharp987 06-04-2009 19:01

RapidShare Downloader v0.2 for Enigma2

enigma2-plugin-extensions-rsdownloader_2.6cvs20090110-r0_mip

Sharp987 06-04-2009 19:04

Shooter/Quickbutton for my Plugins, Enigma2

Shooter/Quickbutton for my Plugins

Shooter_r1.00.tar.gz

Sharp987 06-04-2009 19:14

DVD Player v2.6 Plugin

27.03.2009

enigma2-plugin-extensions-dvdplayer_2.6

enigma2_plugin_dvdplayer_2.6git20090327_r0_mipsel.rar

Sharp987 06-04-2009 19:25

2Прикачено(и)
Плъгин за промяна на бутоните на дистанционното по ваш избор.

enigma2-plugin-extensions-pauli_0.6.11_all.ipk

Sharp987 06-04-2009 19:32

4Прикачено(и)
2Sub-v2.09.02_2_mipsel.ipk
за субтитри за Енигма2 вградени в телетекста. В него няма опция за български субтитри за това се преправя едно файлче:
subtitleSetting.py
което се намира в
/usr/lib/enigma2/python/Plugins/Extensions/2SUBConf
в Bold е това което се добавя във файла:

## By Gruffy
## Change in this file on your own risk...
## Here you can add subtitle languages, change menu language etc.
## Be careful!
## /Gruffy

################### CONFIGS ################################

fontIndex = 12
theSettings = [
## SUBTITLE TYPE
["SubtitleType",
[
["Normal", "2"],
["Hearing Imp", "5"]
],
0,
"SubtileType"],
## PRIMARY LANGUAGE
["Primary Language",
[
["Bulgarian", "bul"],
["Danish", "dan"],
["Dutch", "dut"],
["English", "eng"],
["Estonian", "est"],
["Finnish", "fin"],
["French", "fre", "fra"],
["German", "ger", "deu"],
["Italian", "ita"],
["Latvian", "lav"],
["Lithuanian", "lit"],
["Norwegian", "nor"],
["Polish", "pol"],
["Spanish", "esl", "esp", "spa"],
["Swedish", "swe"]
],
0,
"Language"],
## SECONDARY LANGUAGE
["Secondary Language",
[
["Bulgarian", "bul"],
["Danish", "dan"],
["Dutch", "dut"],
["English", "eng"],
["Estonian", "est"],
["Finnish", "fin"],
["French", "fre", "fra"],
["German", "ger", "deu"],
["Italian", "ita"],
["Latvian", "lav"],
["Lithuanian", "lit"],
["Norwegian", "nor"],
["Polish", "pol"],
["Spanish", "esl", "esp", "spa"],
["Swedish", "swe"]
],
0,
"SecondaryLanguage"],
.................
файла продължава

Плъгина има избор на първи и втори език.
Най-хубавото на плъгина е, че решава проблема с наслагването на субтитрите:
долу на картинките.

2Sub-v2.09.02_2_mipsel.ipk

Sharp987 06-04-2009 19:46

1Прикачено(и)
Плъгин Шерлок - втория инфобар:

enigma2-plugin-extensions-sherlock_4.4_mipsel.ipk

Sharp987 06-04-2009 20:36

Cryptinfo Bar v0.22

Hier ein kleines Enigma2 Plugin das den Verschlüsselungs Status anzeigt,
unabhängig vom Skin.

Muss natürlich nach /usr/lib/enigma2/python/Plugins/Extensions

Unterstützt im Moment:
camd3
mbox/gbox
cccam

IncubusCamd und kbox werden gar nicht bzw. nur teilweise unterstützt.

Die Position lässt sich bequem anpassen an den vorhanden Skin

Die Version 0.2 entstand in Zusammenarbeit mit max10, sozusagen "Best of both Worlds"

Die Version 0.22 enthält ein paar Bugfixes und ist schneller in der Anzeige

CryptInfoBar.zip

Sharp987 08-04-2009 13:05

4Прикачено(и)
Merlin Partnerbox Version 0.91 (RemoteTimer und RemoteTV Player)

Setup
Im Setup (entweder in der Pluginliste oder durch Drücken der "Menü-Taste" in "RemoteTimer Editor") können die Einstellungen vorgenommen werden.
Wenn die Partnerbox beispielsweise einen anderen Turner-Anschluß hat, kann man in der Einstellung Servicelists/EPG auf "use external" umstellen, dann werden die Daten (vorhandene Bouquets und EPG Daten) von der Partnerbox übertragen. Lässt man es auf "use internal" werden die Bouquets und EPG Daten von der eigenen Box genommen (was natürlich wesentlich schneller ist, da keine Kommunikation zwischen den Box für die Daten stattfindet).

Desweiteren kann man im Setup angeben, welche Module der Partnerbox man sich im Extended-Menü anzeigen lassen will (nach einer Änderung ist ein GUI-Neustart erforderlich). Das Modul "RemoteTimer" wird immer in der Liste "Eventinfo" (langes Drücken der Info-Taste) angezeigt.

Bedienung:
In der Maske "RemoteTimer Editor" kann man durch drücken der "OK" Taste einen vorhandenen Timer editieren.
Ansonsten kommt man durch die gelbe Taste in die EPG-Auswahl-Liste, wo man über die Bouquets/Sender-Auswahl dann Timer für die Partnerbox setzen kann (siehe Anzeige auf Bildschirm)...

To-Do:
1) Unterstützung für mehrere Partnerboxen
2) HD-Skin Unterstützung

enigma2-plugin-extensions-partnerbox_0.91-20090407-r0_mipsel


Всички времена са във формат GMT +3. Часът е 03:58.

DTV-BG Powered by vBulletin Version 3.8.5
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.