Дриймбокс Енигма2 - Плъгини
1Прикачено(и)
DFC - Dreambox Flash Control Webinterface
enigma2-plugin-extensions-dfc_0.0.9-20090220-r1 What's new: *[Bugfix] Routine der IP-Adressen Zuordnung behoben. enigma2-plugin-extensions-dfc_0.0.9-20090220-r1_mipsel.rar |
GSF_multi-transcoder
The GSF_multi-transcoder is a tool that launches Videolan on your pc with the appropriate settings and transcodes any [.avi] [.divx] or [.mp4] files into .ts format so they can be readable by your dreambox It can be used as an alternative to the VLCF plugin but also it can be used to convert your divx, mp4, avi files to ts and transfer them automaticaly to the hard drive of your dreambox How to use: ----------------- Make sure you have VLC installed on your pc Mount to your dreambox any directory of your pc Place the two files (GSF_multi-transcoder_tool.exe and dreamsetup.txt) inside the pc directory that you have already mounted to your dreambox Setup dreamsetup.txt with your dreambox ip and password Place in the same directory any .divx file and run the GSF_multi-transcoder_tool.exe You will immediately see that a file is created with the same name but with a .ts extension Allow a couple of minutes for the file to build up a bit Now with your dreambox remote, in filemode navigate to the directory that you have mounted, select the file with the .ts extension and press "ok" to start viewing. Fast forward, pause and so on are handled by the coloured buttons of your remote and they work flawlesly in contrary of the vlcf plugin that most of the time will freeze the box (of course maybe thats just me) For files that you wish to be transfered to the dreambox hdd after they have been transcoded just pace an underscore [_] in the beginning of the filename e.g. myvideoclip.avi > _myvideoclip.avi In case that you wish to merge subtitles in to the .ts file, place the subtitle file in the same directory and make sure it has the same filename with the .divx or .avi file e.g. myvideoclip.avi myvideoclip.srt Note that in case of multiple .avi .divx .mp4 files in the directory the trancoding will be done in alphabetical order enjoy!! GSF multi_transcoder_tool_v1.0.0.2_for_latest_version_of_vlc GSF multi_transcoder_tool_v1.0.0.2.rar |
|
|
DVD Player v2.6 Plugin
27.03.2009 enigma2-plugin-extensions-dvdplayer_2.6 enigma2_plugin_dvdplayer_2.6git20090327_r0_mipsel.rar |
2Прикачено(и)
Плъгин за промяна на бутоните на дистанционното по ваш избор.
enigma2-plugin-extensions-pauli_0.6.11_all.ipk |
4Прикачено(и)
2Sub-v2.09.02_2_mipsel.ipk
за субтитри за Енигма2 вградени в телетекста. В него няма опция за български субтитри за това се преправя едно файлче: subtitleSetting.py което се намира в /usr/lib/enigma2/python/Plugins/Extensions/2SUBConf в Bold е това което се добавя във файла: ## By Gruffy ## Change in this file on your own risk... ## Here you can add subtitle languages, change menu language etc. ## Be careful! ## /Gruffy ################### CONFIGS ################################ fontIndex = 12 theSettings = [ ## SUBTITLE TYPE ["SubtitleType", [ ["Normal", "2"], ["Hearing Imp", "5"] ], 0, "SubtileType"], ## PRIMARY LANGUAGE ["Primary Language", [ ["Bulgarian", "bul"], ["Danish", "dan"], ["Dutch", "dut"], ["English", "eng"], ["Estonian", "est"], ["Finnish", "fin"], ["French", "fre", "fra"], ["German", "ger", "deu"], ["Italian", "ita"], ["Latvian", "lav"], ["Lithuanian", "lit"], ["Norwegian", "nor"], ["Polish", "pol"], ["Spanish", "esl", "esp", "spa"], ["Swedish", "swe"] ], 0, "Language"], ## SECONDARY LANGUAGE ["Secondary Language", [ ["Bulgarian", "bul"], ["Danish", "dan"], ["Dutch", "dut"], ["English", "eng"], ["Estonian", "est"], ["Finnish", "fin"], ["French", "fre", "fra"], ["German", "ger", "deu"], ["Italian", "ita"], ["Latvian", "lav"], ["Lithuanian", "lit"], ["Norwegian", "nor"], ["Polish", "pol"], ["Spanish", "esl", "esp", "spa"], ["Swedish", "swe"] ], 0, "SecondaryLanguage"], ................. файла продължава Плъгина има избор на първи и втори език. Най-хубавото на плъгина е, че решава проблема с наслагването на субтитрите: долу на картинките. 2Sub-v2.09.02_2_mipsel.ipk |
1Прикачено(и)
|
Cryptinfo Bar v0.22
Hier ein kleines Enigma2 Plugin das den Verschlüsselungs Status anzeigt, unabhängig vom Skin. Muss natürlich nach /usr/lib/enigma2/python/Plugins/Extensions Unterstützt im Moment: camd3 mbox/gbox cccam IncubusCamd und kbox werden gar nicht bzw. nur teilweise unterstützt. Die Position lässt sich bequem anpassen an den vorhanden Skin Die Version 0.2 entstand in Zusammenarbeit mit max10, sozusagen "Best of both Worlds" Die Version 0.22 enthält ein paar Bugfixes und ist schneller in der Anzeige CryptInfoBar.zip |
4Прикачено(и)
Merlin Partnerbox Version 0.91 (RemoteTimer und RemoteTV Player)
Setup Im Setup (entweder in der Pluginliste oder durch Drücken der "Menü-Taste" in "RemoteTimer Editor") können die Einstellungen vorgenommen werden. Wenn die Partnerbox beispielsweise einen anderen Turner-Anschluß hat, kann man in der Einstellung Servicelists/EPG auf "use external" umstellen, dann werden die Daten (vorhandene Bouquets und EPG Daten) von der Partnerbox übertragen. Lässt man es auf "use internal" werden die Bouquets und EPG Daten von der eigenen Box genommen (was natürlich wesentlich schneller ist, da keine Kommunikation zwischen den Box für die Daten stattfindet). Desweiteren kann man im Setup angeben, welche Module der Partnerbox man sich im Extended-Menü anzeigen lassen will (nach einer Änderung ist ein GUI-Neustart erforderlich). Das Modul "RemoteTimer" wird immer in der Liste "Eventinfo" (langes Drücken der Info-Taste) angezeigt. Bedienung: In der Maske "RemoteTimer Editor" kann man durch drücken der "OK" Taste einen vorhandenen Timer editieren. Ansonsten kommt man durch die gelbe Taste in die EPG-Auswahl-Liste, wo man über die Bouquets/Sender-Auswahl dann Timer für die Partnerbox setzen kann (siehe Anzeige auf Bildschirm)... To-Do: 1) Unterstützung für mehrere Partnerboxen 2) HD-Skin Unterstützung enigma2-plugin-extensions-partnerbox_0.91-20090407-r0_mipsel |
3Прикачено(и)
LS-TG24interactive r1.2
Плъгин за интерактивно гледане на TG24 - 6-те новинарски италиански канала. LS-TG24interactive_r1.2.rar |
2Прикачено(и)
LS-DGinteractive r1.2
Плъгин за интерактивно гледане на 8 -те програми на SKY Италия Калчо. For Enigma2 DirettaGOL Interactive is a plugin for Enigma2 that allows you to interactively log on to the service DirettaGOL. In launching the plugin, Dreambox changes channels and tunes to the channel Mosaic (Channel Active1) automatically. You'll see a yellow cursor around the first window, Moving the cursor with arrow keys (right-left) of the remote, you can listen to the sound of the corresponding game. Press OK to go full-screen channel and EXIT (or OK) to return to the Mosaic, press EXIT 2 times to exit out of the plugin and return to last channel viewed prior to the plugin. What's New * Compatibility with skin in HD (dream 800-8000). * Switch 4:3 video and return to the previous exit, compatibility with the new video modes (latest CVS). * GolReplay window, selectable via GREEN button when the replay part in the preview. * Removing .ipk files automatically to /tmp after installation. The function GolReplay is only available on the DM7025 and DM8000, but not possible on the DM800 as a result of the absence of PIP. LS-DGinteractive_r1.2.rar |
|
Плъгин за Бекъп като имидж файл .nfi.
Не съм го пробвал. Правя си бекъп като имидж фаил с Barry Allen. nfibackup_20090324_mipsel.rar |
2Прикачено(и)
EPG Evolution E2 0.9
EPG Search (default remote button 9) Customising remote buttons (remote.xml) Ignore marker and special functions in the channel list Updated channellist reader function Scrolling page up and down in desc view epg-evolution-current.rar |
2Sub за Dreambox
Цитирай:
файла се намира в /usr/lib/enigma2/python/Plugins/Extensions/2SUBC/subtitleSettings.py и се добавя само " ["Bulgarian", "bul"], " преди " ["Danish", "dan"], " на двете места както е показал Шарп в пост #7 Отново да благодарим на Шарп за неговия ентусиазъм и здрава работа по проектите за Dreambox. :f040(1):;;614 |
Цитирай:
GSF_multi-transcoder GSF_multi-transcoder е инструмент, който стартира Videolan на вашия PC със съответните настройки и преобразува (транскодира) всякакви [.avi], [.divx], или [.mp4] файлове в [.ts] формат така, че те могат да бъдат разчитани от вашия Dreambox Може да се използва като алтернатива на VLCF плъгина, но може също така да се използва и за преобразуване на вашите divx, mp4, avi файлове в ts, да ги забързва автоматично и да ги прехвърля автоматично на твърдия диск на вашия Dreambox. Как да го използваме: Уверете се, че сте инсталирали програмата VLC на компютъра си; Монтирайте на Dreambox-a си някоя от директориите от вашия PC; Поставете двата файла (GSF_multi-transcoder_tool.exe и dreamsetup.txt) в директорята на компютъра си, която вече сте монтирали във вашия Dreambox; Настройте dreamsetup.txt с Вашия IP на Dreambox-а и паролата му. Поставете в същата директория някой .divx файл и стартирайте GSF_multi-transcoder_tool.exe; Веднага ще видите, че се създава файл със същото име, но с разширение .ts; Оставете го няколко минути, за да може файла да се създаде напълно; Сега с дистанционното на Вашия Dreambox, в режим на файлове (filemode) в директорията, която сте монтирали вече, изберете файла с разширението .ts и натиснете "ОК" бутона, за да започнете гледането; Бърз напред, пауза и т.н. (Fast forward, pause) се управляват с цветните бутони на дистанционното Ви, и те работят гладко, за ралика от плъгина VLCF, който в повечето случаи блокира приемника (може пък това да е само при мен); За файловете които искате да прехвърлите на хард диска на дриймбокса, след като са преобразувани просто поставете (underscore) [_] в началото на името на файла т.е myvideoclip.avi --> _myvideoclip.avi; В случай че искате да смесите и субтитри във файла с разширението .ts, поставете файал със субтитрите в същата директория и се уверете, че файла е със същото име както .divx или .avi файловете т.е., myvideoclip.avi myvideoclip.srt Забележка: в случай, че в директорията за преобразуване се намират множество файлове с разширения .avi .divx .mp4 прекодирането, ще се извърши във възходяща последователност по имена. Приятна работа и забавление!! Дълбок поклон отново на Шарп.;;650 |
AutoResolution plugin
Цитирай:
|
4Прикачено(и)
Плъгин за регулиране на яркостта на картината на LCD/OLED
enigma2-plugin-extensions-autodimm_0[1].1_mipsel.zip |
FTDSIO (smargo) and PL2303 (serial converter) for DM 800
Drivers for smargo and other serial converter with PL2303 chip put in /tmp and install with ipkg instal ftdsio e pl2303 dream 800 module.zip |
Цитирай:
|
3Прикачено(и)
|
Плъгин - Бундеслига
Нова версия: neue Version 1.2 * Fehler beim Starten, switch aus Unterkanal bzw. laufendem Movie behoben * Mit der Videotaste kann bei laufendem Ticker ein Movie ausgewählt und gestartet werden ( Stop mit TV Taste ) mehr leider nicht Augenzwinkern * Einzespiel- oder Konferenzticker Auswahl ( Menuwechsel mit Bouquet + / - Tasten ) * Auswahl Tickermeldungen, alle oder nur die letzten 6 ( Einstellungl über Config-Menu ) * transparente Icons im Textticker ( danke dreamkp Augenzwinkern ) * man kann nun im Config-Menu einstellen ob alle Meldungen oder nur der Ergebnis- bzw. Textticker angezeigt werden soll enigma2-plugin-extensions-buliticker_1.2_mipsel.rar |
PiP-Zap for Gemini 4.2-E2
Не иска да се инсталира на друга версия на Gemini освен на 4.2 Hier mal den PiP-Zap Patch von ritzMo den ich für Gemini 4.2 umgesetzt habe. Das IPKG sichert bei der Installation alle Originaldaten vor dem überschreiben, und stellt die auch wieder beim deinstallieren her. ACHTUNG: Wenn andere Plugins oder sonst was, Änderungen an den entsprechenden Files vorgenommen hat, ist die dann natürlich weg !!!! /usr/share/enigma2/keymap.xml /usr/lib/enigma2/python/Screens/ChannelSelection.py /usr/lib/enigma2/python/Screens/InfoBar.py /usr/lib/enigma2/python/Screens/InfoBarGenerics.py /usr/lib/enigma2/python/Screens/PictureInPicture.py Danach mal PiP mal wie gewohnt einschalten, dann nochmals in's Extension Menü (lange blau) gehen und da kann nun mit der roten Taste der Umschaltfokus auf das PiP gelegt werden. Links oben steht das dann auch eingeblendet. Mit der ChannelSelection kann dann auch das PiP Programm gewählt werden. Das PiP-Zap kann mit Shift-TV auch DIREKT ein- und aus-geschaltet werden. Zudem gibt es in der ChannelSelection (Kanalliste) im Kontextmenü (Menü Taste) die Einträge "play as pip" und "play in mainwindow" je nachdem wo der Fokus im moment liegt. enigma2-pip-zap-for-gemini4[1].2_1.0.0_r0_mipsel.zip |
2Прикачено(и)
F1 Interactive Plugin E2 v1.20
by Musicbob First public release: v1.20 - Compatibility with skin in HD (dream 800-8000) - Switch video to 4:3 and back to the previous exit - Recognition of the decoder used for the setting of the main channel (Ssport2 or HD2) Description: E 'Enigma2 a plugin that allows you to interactively log on to Formula 1 In launching the plugin, the dream changes channels and tunes to the channel Mosaic (Channel Active3) automatically. You'll see a yellow cursor at the window Corsa (Channel SkySport2 or HD2) Moving the cursor right or left, you can hear the sound of the corresponding channel. Pressing OK will be displayed instead channel their full-screen and EXIT (or OK) to return to the Mosaic, the pressure of 2 times still EXIT us out of the plugin and return to the previously tuned channel. Installation: 1) Insert the package. Ipk to / tmp via FTP 2a) From telnet, type: ipkg install / tmp / *. ipk <ENTER> or 2b) Using the script "ipk_install" of LS (LS Menu Extras-> script). or 2b) With the appropriate plugins to install the ipk vs. favorite picture. (NB: after installing the files manually RESTART enigma2 need to make visible and properly operating the plugin) It will be visible in the Plugins in that extension. LS-F1interactive_r1.20.rar |
Цитирай:
Да благодарим отново на Шарп. Интерактивен плъгин за F1 при E2 v1.20 за LS Images. by Musicbob Първо обществено издание: v1.20 - Съвместима кожа за HD (dream 800-8000); - Превключете видеото на to 4:3 и се върнете на предишния екран с EXIT; - Разпознаване на деодера използван за настройване (Ssport2 или HD2). Описание: Това е 'Enigma2’ плъгин, който Ви позволява интерактивно да се логнете към Formula 1. При стартиране на плъгина, дрийма променя каналите и избира канала Мозайка (Mosaic (Канал Active3) автоматично. Ще видите жълт курсор в прозореца на Corsa (канал SkySport2 или HD2) Като придвижвате курсора наляво или дясно можете да чуете звука на съответния канал. Натинете OK вместо канала ще се покаже неговия пълен екран и EXIT (или OK) за да се върнете към Мозайката, а като натиснете 2 пъти EXIT ще излезе от плъгина и ще се върне към предишния избран канал. Инсталиране: 1) Вмъкнете пакета .ipk в / tmp чрез FTP. 2a) От telnet, напишете: ipkg install / tmp / *. ipk <ENTER> или 2b) Използвайте скрипта "ipk_install" на LS (LS Menu Extras-> script). или 2b) Със съответните плъгини на даден имидж, които трябва да инсталират ipk със съответната картинка. (NB: след инсталацията на файловете ръчно РЕСТАРТИРАЙКИ enigma2 е необходимо плъгина да стане видим и съответно работоспособен) Тогава той ще стане видим в разширенията Plugins. LS-F1interactive_r1.20.rar |
Drtic-Enigma2!!!
Най-накрая излезе и drtic и за Енигма2. За който не знае, плъгина служи за ползване на субтитри за Dreambox 7025,800 и 8000! Инсталиране: # Downdownloadload common installation package # Copy both files with a FTP client to /tmp on your Dreambox # Connect to your Dreambox with telnet (or putty) # Type following command:cd / && tar xzf /tmp/drtic2.tgz && tar xzf /tmp/drtic.tgz (use copy&paste if you are not sure) # Restart GUI Има и за български субове. drtic2.gz drtic.tgz DrticE2-All language pack.rar |
Цитирай:
Това е по простия начин, а по сложния е като се разрхивират директориит на .tgz в NewNigma2 image-a съответно във /usr/lib/enigma2/python/Plugins/Extensions/Drtic/ има 4 файла, и във /var/tuxbox/Drtic/ има 2 файла и една папака още |
За Drtic-Enigma2!!!
добавих и файла drtic2.gz Ако някой го е пуснал да каже как е. За сега не съм го пробвал. |
Инсталатор за Drtic Enigma 2 Dreambox приемници.
Въпреки че това е tools, го слагам в тази тема. Drtic_ENIGMA_2_Installer_1.0.rar |
Drtic Enigma 2
For Gemini 4.20 Install D1.tar.gz & D2.tar.gz Via File Manager Then Restart GUI Drtic 0.3e Installer ( EXE File ) : Convert SRT Subtitles To DTC & Copy Them To var/tuxbox/Drtic/tit By ARTM@N D1.tar.gz D2.tar.gz Drtic_0.3e_Installer.zip |
2Прикачено(и)
Drtic Enigma 2
Тествано работи на 100% на Gemini2 v4.0 Инсталирах го с това: http://www.dtv-bg.com/showpost.php?p=14106&postcount=30 Ето и скрииншот: |
Цитирай:
|
1Прикачено(и)
И изцяло да довършиме темата за Drtic Enigma 2
Благодарение на Netman - за сайта със субовете (по долу) и на Peter -за конвертора за субове Ето и всичко необходимо след инсталацията на плъгина. Сайт за субове тук Конвертор за субове от SRT към DTC в конвертора не забравяйте за да не са субовете на маймуница: на картинката - избирате windows 1251 За да рабооти конвертора - трябва да имате инсталирана JAVA Може ръчно после да си прехвърлите конвертираните субове в ДМ800 /etc/tuxbox/Drtic/tit а може и конвертора да ви ги прехвърли там. Приятно гледане. jDrtic.rar |
|
Merlin MP3-Player Version 0.95 mit iDream Version 0.1 (Update: 30.05.09)
Bug Fix: DM800 mit Softwarepdate vom 29.05 --> Player Crash --> Fixed! |
1Прикачено(и)
|
1Прикачено(и)
Dreambox MediaCenter v0.9.3
AudioPlayer: Fixed BlueScreen caused by changes in newer enigma Audio, Video, Picture Player: Fixed possible BlueScreen when trying to add a non-existing folder to favorites Please note: Enigma² from May/June 2009 or later is required! enigma2-plugin-extensions-mediacenter_0.9.3_mipsel.rar |
PiP-Zap ritzMo patch for Gemini 4.3
Here's the PiP Zap patch from the ritzMo Gemini 4.3 I've implemented. The iPKG secures to install all the original data before the overwrite, and the uninstall again at her. NOTE: If other plugins or else make changes to the files has, of course, is to be away! Code: 1: 2: 3: 4: 5: / usr/share/enigma2/keymap.xml / usr/lib/enigma2/python/Screens/ChannelSelection.py / usr/lib/enigma2/python/Screens/InfoBar.py / usr/lib/enigma2/python/Screens/InfoBarGenerics.py / usr/lib/enigma2/python/Screens/PictureInPicture.py Then PiP times, as usual, turn on, then again in the menu's extension (long blue) and as can now use the red button on the PiP Umschaltfokus be. Top left is the will appear. With the channel selection can then also the PiP program chosen. The PiP-Zap can shift DIRECT TV also from one-and-running. In addition, there are in the channel selection (channel list) in the context menu (menu button) the entries "play as pip" and "play in main window" depending on where the focus lies in the moment. enigma2-pip-zap-for-gemini4.3_1.0.0_r0_mipsel.rar |
1Прикачено(и)
|
Всички времена са във формат GMT +3. Часът е 10:47. |
DTV-BG Powered by vBulletin Version 3.8.5
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.